the Airport extreme, passing the spam of the printer

Similar Questions

• The use of Airport Extreme but can't find my printer.

  I plugged my HP Laserjet 1200 on my Dell XPS 8100 runnig Win 7. All right.

  I then connect my LaserJet to my Apple Airport Extreme, but Bonjur or it will not find the printer. I did turn my Extream airport on an XP system without problem. Now, nothing using Win 7.

  Now that I'm on Win 7, I need to do something special to find my printer?

  Any advice would be great.

  Lorena ;-)

  Set up:
  1
  Connect the printer to the USB Extreme Airport (d port
  ) using a USB cable.
  2
  Open AirPort Utility (located in the Utilities folder in the Applications folder on a
  computer using Mac OS X, and in start > all programs > AirPort on a computer using
  (Windows), select your base station, and then click on continue.
  3
  Follow the instructions on the screen to create a new network.
  To print from a computer using Mac OS X 10.2.7 or later:
  1
  Open the printer setup utility (located in the Utilities folder of the Applications folder).
  2
  Select the printer in the list.
  If the printer isn't in the list, click Add and choose Hello in the context menu,
  then select the printer in the list.
  To print from a computer using Windows XP:
  1
  Install Hello for Windows from the CD that came with your AirPort Extreme.
  2
  Follow the on-screen instructions to connect your printer.

• IP address for LaserJet 4100N changed which resulted in "Impossible to connect to the printer" error

  I had the printer (HP Laserjet 4100N) and the computer (desktop Mac OS X Version 10.6.8) unplugged for two months.  When I enabled both, I wasn't able to print more.  The two are connected by Ethernet (via an Airport Extreme 802.11n) cable

  After printing the Configuration page, I noticed that the address of the printer HP JetSend is 10.0.1.8 now.  It used to be 10.0.1.5

  When I type http://10.0.1.8/hp/jetdirect, it is confirmed that the printer has a new address.  When I go to preferences on the computer, followed by Print & Fax, I see the originating IP address always.  When I go to options & offer, the originating IP address is present in the name and location boxes.  I thought that I could just change the IP address both of these boxes to the new IP address.  It does not work.  (BTW and URL never lpd queue name change 10.0.1.5 to 10.0.1.8).

  Then I thought that things would be solved by changing the new IP address to the former in the menu that appears when I look at http://10.0.1.8/hp/jetdirect. Which doesn't work anymore.

  What Miss me?

  Thank you

  Patrick

  It is resolved...  I went to the Apple discussion Forum and saw this:

  Regal909 , February 28, 2010 20:35
  in response to Chuck Stewart

  OK, this one is solved. In Print & FAX preferences panel, click on the button "+" to add a printer. Define the contextual menu Protocol to "HP Jetdirect - taken". In the 'Address' field, enter the IP address of the HP 4100.

  Leave the class 'tail' blank unless you use a print server. I'm not...

  Set the 'Name' field to what you want as a name for this printer.
  Set the field 'Place' to something that reminds you of where this printer is physically located.

  Currently, Mac has probably already found the printer by its IP address, select the driver appropriate for you, and so all you need to do is click the Add button.

  Good impression...

• The Airport Extreme has download slow unless its an apple product

  I need help.  I have an Airport Extreme router.  I run a HP all in one office, two smart TV, Wii and two boxes on my router.  Not all work at the same time, nor do two pass at the same time.

  I check my router on Mac speed: 100 Mbit/s easy.  I check my iphone: 100 Mbps.  I checked the HP desktop computer: 30-50 Mbps.  I haven't checked the Wii, Smart TVs do not open always Netflix, my boxes go slow and buffer for long periods of time.

  There must be a setting that does not allow non-Apple products to run more slowly.  I pay 100 Mbps and expect to receive 100 Mbps on the Airport Extreme for all products, not just Apple products.

  What I could try or have I missed that should be done so all non-Apple products get the speed of download and Apple products?

  I called support and they had me change the channels in the configuration of the Airport Extreme wireless.  That did not help.  I changed them back and now the iPhone runs slower, below 50 Mbps upload when you fill out a speed test on www.speedtest.com.  I'm sitting in the same place.  It makes no sense at all.

• Implementation of Airport extreme with the same SSID

  My House has very thick walls and so I run a Cat5 cable for a number of rooms and installed an Airport Extreme for everyone to create a local WiFi network.

  For the moment, each creates its own wi fi network which is very good for connecting phones, tablets and laptops but I'm trying to connect some SONOS devices and they are not find each other so not a link to the main controller of SONOS.

  SONOS support suggests that if I could get the extremes of the airport on the same SSID, which should help you because they would all be network extensions and so devices would be able to find each other.

  I tried making them all extensions of the network wi fi router but can't see not in the options when I select "Extend an existing network", although on my iPad, I can see wi fi network to the router where the Airport Extreme is so too, it is wired to the router would have thought it should be possible to make all the extensions of a single network.  Research in the community, it seems that the airport is unable to extend a wifi network not Apple, but I could at least get all the airports on the same SSID can help.  I also tried to set up airports so they all extend the network, but they do not see each other because they are too far away.

  I'm not an expert in network management, I understand bits having to solve problems earlier, but if there is there advice or suggestions of the community that would be great

  Thank you

  David

  You choose to extend a network when the incoming signal is wifi. What you need is a "mobile network". Simply connect each airport to the router by ethernet and network with the same SSID and password than the original. Reset the airports so that they put in place from the new so that they detect the arrangement and get into bridge mode - you do not want to provide the IP numbers, you want the home router to do and airports to pass.

  See this page and scroll down to "Roaming Network (Wi - Fi connected base stations)':"

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• Can the Airport Extreme connect wireless to my wifi network?

  Hi all

  I have an Airport Extreme, which I use only for his Time Machine feature.  Best I can tell the only way he can connect to my wireless network is extending.  Is this correct?

  If I use it to extend my wireless network was is the negative impact (if any)?

  Thanks in advance.

  You can extend wireless or even join wireless to less the router that you connect to another router from Apple.

  If this is the case then it can work well if it is in the range... otherwise, you must plug the AE into the router principal by ethernet and put in place as a separate network wireless access point.

  Extend wireless is bad if you are linked to the main router wireless... which will cause huge slow down even if you are in a situation of apple router all.

• The settings DHCP Airport extreme & NAT - cannot change default of NAT IPs?

  Hello

  I'm trying to configure Airport extreme, the most convenient to use for our office.

  Our Office IP is 10.255.x.x

  When I'm trying to Setup DHCP and NAT, in NAT options, there is only 10.0.x.x, 172.16.x.x and 192.168.x.x

  How can I get NAT to have 10.255.x.x?

  Without the NAT settings, I can not get this Airport Extreme to assign valid IP addresses and so unnecessary

  Sorry, but Apple will only accept the 10.0.x.x addresses to be assigned by the AirPort Extreme.

• The airPort Extreme is no longer a part of my network

  I have ac AirPort Extreme 802.11.  Pitcher pump utility now shows a yellow warning Triangle and said my "AP Ext. was part of my network.  Device is missing from your network. "Green light is always on, showing that we still have a wi - fi connection.  Our wireless devices still work.  How to sort our equipment again?  2 changes that has happened in a short

  period: I downloaded the latest security patch apples for all devices.  We have implemented a new Smart TV to connect to Internet via WiFi AP Extreme.  That could affect one of these?  How to reset?

  Hello

  Try a reset. Instructions here > reset an airport base station FAQ - Apple Support

• How can I configure my Airport Extreme in Bridge mode (use the 3rd party router)?

  Data sheet:

  Airport Extreme - v 7.7.7

  Luma Surround Wifi 8

  I recently bought a wifi (luminance) surround system.  It comes with 3 routers that you place around your home.  Unfortunately I still have stains died in my house I'm looking to add my Airport Extreme (AE) to Luma network.  Is it as simple as plug the AE to the network (via Ethernet) and the bridge mode selection in the configuration of EI?

  I can see the AE of my iMac, and it is green.  How do you know that actually extend the wifi of my router Luma range?

  I searched the forum and all messages dealing with this are several years old.

  Thanks for your time...

  Basically, you want to create a mobile network with your Luma and AirPort Extreme routers. As you said, the extreme would need to be connected to the luminance by Ethernet and reconfigured as a bridge.

  In addition, the following are also required on the extreme:

  • Wireless mode: create a wireless network
  • The network name must be the same as that used by the Luma.
  • The type of wireless security and the password must match that of the luminance as well.

  To 'know' that the extreme extends the network of Luma, simply consult the BSSID value in the drop-down of OS X Wi - Fi. It must match the ID of the airport on your base station. Note: You must hold down the option key before clicking on the icon of the free Wi - Fi connection.

• The airPort Extreme is not working after Firmware update

  Hello

  At our office, we have several AirPort Extreme or TimeCapsules and one of them (AirPort Extreme) stop working properly after the update 7.7.7

  The update itself is supposed to be ok and we have updated all our stations but it only seems to not work. I have hard and factory reset and somehow until last month worked more less, but from this week completely stop working and even reset does not work.

  I already ran out of ideas and it seems that Apple wants to charge me $ 30 for a phone call.

  Someone at - it a similar case? Should I take on the Apple Store?

  Thanks in advance for your help.

  You can get it replaced if it is less than one year... That is to say in the warranty or if you have any computer or ipad or apple TV which is covered by the applecare will also cover the airport up to 3 years old if EI is less than 2 years, you can still buy applecare on a product calling... or you can buy say an apple TV and buy applecare for it.

  If Apple do not repair them. only, they will be replaced.

• How to reset the airport extreme to factory default

  My Airport & time capsule are not connected to the modem, saying no dns server is available, however the modem works when connected to the computer. (Macbook) After hours of troubleshooting, I would just restore default settings and see if I can get it going again. Can anyone provide info on restoring the default settings?

  Thank you!

  • Turning off AirPort Extreme for a minute or two
  • In the reset button on the back of the AirPort Extreme first... and keep taking them for 7 to 8 seconds... while simultaneously you reconnect the power on the AirPort Extreme.  (This step is a bit complicated for most users, because it takes almost 3 hands to do it properly)
  • Release the reset button to zero after the period of detention and allow a minute for the AirPort Extreme back on the way to a slow, flashing amber light status

  AirPort Extreme is now back to the State it was when you took it first out of the box.

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.