The Antimalware Service executable starts and I consume all CPU resources 70% →→ (El Antimalware Service executable is starts y consume me todos los recursos 70% CPU)

Similar Questions

• I tried to open a shortcut with Notepad and now each shortcut on the computer opens with Notepad and it's all over!

  So I need to edit this batch file, and I right-click on it to open it with something else. I found (which, it's logical!) particular option was not there.

  I created a shortcut for this, in the hope that the option within this drop-down list, which he was. I chose Notepad, then BAM. Every single shortcut on the computer

  opens with Notepad. I tried to click 'open with a default program', but who has just missed even more. But wait, it's even worse! Now my internet it is fucked up.

  Whenever I open it with its program file, it just opens upward from the downloads page; for Chrome and explore. I can't make a new log in because I gave a flash drive large enough to hold all the files that I need and I just need to stay on this one. Please help soon

  Jaden14541

  Hi Jaden14541,

  Please take a look at the article here with more troubleshooting for your question.

  I hope this helps!

• I can't update, get the same msg error 800b0100 and we tried all the suggestions I can do?

  I tried all the suggestions, but I was not able to solve the problem.

  Hello Deborah 755,.

  Thanks for posting that question you in the Microsoft Community. According to the description of the problem, you are not able to install the updates. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  ·         The issue is limited to a particular update?

  ·         You use a third-party security software?

  ·         Have what troubleshooting measures you tried?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Place the computer in a clean bootState to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of section to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  You can read this article for more information:

  How to reset the Windows Update components?

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Where is a list of all the updates of Coldfusion security and fixes for all versions of Coldfusion?

  Hello

  Does anyone know if there is a page that lists all the updates and security fixes for all versions of Coldfusion? I find their update/patch pages of description to be very frustrating to also manage/announce/make available their updates/corrections. I use CF9.0.2.

  Thanks in advance!

  Joe

  You can find the list here: http://helpx.adobe.com/security/products/coldfusion.html

  As a side note, my company has a service called HackMyCF that helps you stay on top of what updates to install: http://hackmycf.com/ it is a free scanner and a paid subscription that gives you more in-depth reports like this one: https://foundeo.com/hack-my-cf/example-report.cfm

• How can I stop Windows Media Player from the addition of music, videos and photos of ALL of my files?

  Basically whats happening is my windows media player added basically never picture, song and video I have of EACH SINGLE FOLDER on my laptop, and I mean every file. even files with about 1000 mp3 files each inside, when there long about 1 second. It's ridiculous and now my laptop has become very slow, I can't keep open media player for as long as it keeps crashing added and updated files per second, now I can't even listen to my XBOX it became so lag.

  any help what so ever would be greatly appreciated.                                Thank you very much

  Hello

  Step 1: Launch the Media Player settings troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Step 2: To remove a folder monitored by the player, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-library

• Most of the games will not load and cannot see all the options.

  Original title: installation of Command and Conquer 'the first decade.

  Hello

  I recently installed first decade on my laptop running windows 7 64 bit. I can load the screen perfectly, but most of the games, I can not load except red alert 2 and even in this case I don't see any options. The only way I can see them is by pressing alt + Tab to go to my office then flow back into the game, but I think it's to do with the size of the screen, but I'm not sure. Other games work not at all except the storm and Tiberian Sun. These don't work if I click them restart the entire computer and load the game up and go straight to him.

  Whenever I click on other games, red alert bar 2, it asks me to insert the correct disc which is of course already in the machine

  Hello

  Did you try to update the graphics card for Acer drivers and install updates?

• How to keep from losing the image quality with environments found on the web. I drag the image in PS CC and it is all pixelated.

  I am PS CC for the first time. So what I'm trying to do, is to drag the different environments found on the web mainly 800 x 800 or near. When I drag the image in the page the image using Photoshop default PS is pixelated. How can I fix it. I run Windows 7 64 bit.

  Get a picture of higher resolution.

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• The upgrade to vCenter Server to vCenter Server 5.1 5.1 update 1 when the SQL database is remote and vCenter Server Heartbeat is installed

  Hi guys,.

  I'm in the middle of an upgrade to vSphere 5.1 5.1 vSphere update 1. I have vCenter protected by HB and SQL on a separate computer (also protected by HB) I also run Syslog, Update Manager and Proxy authentication on vCenter.

  I've successfully upgraded HB on all 4 nodes (2 x vCenter & 2 x SQL) and started the upgrade components on the secondary according to the •vCenter Server Heartbeat 6.5 server and vCenter Update 1 Installation on Windows Server 2008 when the secondary server is virtual (PDF) http://www.vmware.com/pdf/vcenter-server-heartbeat-65-u1-installation-windows-2008-virtual-guide.pdf

  I got to step 3.c

  3. change the primary/active server role:

  a launch of the vCenter Server Heartbeat wizard configure server and click the tab of the Machine to change the server role for the current server (primary) to the active State and click Finish.

  b using the Service Control Manager, start the Server Heartbeat of VMware vCenter service.

  c using the vCenter Server Heartbeat Console, check that all the status icons on the server: summary page are green indicating that the boot process is completed and protected from all the services are started.

  d using the Service Control Manager, stop the service Server Heartbeat of VMware vCenter.

  As the vCenter service does not start, I'm stuck at this point. As far as I'm concerned, the error is quite logical. I've updated vCenter using the secondary server, and then I'm trying to connect (according to the guide) with another version that breaks down.

  If I continue with the services stop and launch the installer SSO, it is trying to perform an uninstall!

  Did I miss something in this upgrade?

  Concerning

  
  Ciaran

  Hi guys, VMware have finally updated the documentation to reflect the right way forward: https://www.vmware.com/support/pubs/heartbeat_pubs.html U1 6.5 Select from the menu drop-down and you'll see the last date of update for each of the documentation is now 10/10/2013. The guide States now specifically to restore the vCenter database before proceeding with any other measure, this is copied below for convenience: "the upgrade of the main server of the upgrade process further guess upgrading the secondary server completed successfully. Procedure 1 before continuing the upgrade process, perform a restore of the database of vCenter Server, Single Sign-On database, VMware Update Manager database and SSL certificates that were backed up in step 4 on the secondary server. regards Ciaran

• What is the difference between hard links and junctions?

  Hey, if my computer is bogged down and I'm working on speeding up. I have two hard drives, and C: represents 87% of full while D: is very empty. I play PC games so I installed Steam on my computer in my C: drive and its about 45 GB. I want to fly over as many of what I can and I've fallen on junctions and hard links. So I want some help forming in line of command and advise if it is actually help

  I do not understand the difference between the hard links and junctions so I do not know which one to use, but I know that I don't want the original still on the C: drive, so should I use a hard link?

  C:\mklink/h "D:\SteamSpare" "C:\Program Files (x 86) \Steam.

  would this work?

  Wednesday, August 11, 2010, 22:06:23 + 0000, 8bitAudio wrote:

  I use Microsoft Security Essentials for anti-virus

  Good choice!

  and Spybot Search & Destroy as my anti-spyware/malware.

  I keep up to date and run Spybot normally every two days. I run a scan with MSE less often and usually a quick analysis. Usually when I try to run a full scan it stops randomly in the middle of it. Any suggestions?

  Spybot Search Destroy & was once among the best choices of
  the anti-spyware programs, but is no longer. I recommend that you
  Download, install and run time MalwareBytes AntiMalware and
  SuperAntiSpyware.

  Many times, this is not really slow but randomly becomes slow and can freeze, all CPU usage monitors fall to 0% - 2%

  Ken Blake

• I'cant connect. The wheel continues to roll and never connect. Internet works fine.

  I'cant connect. The wheel continues to roll and never connect. Internet works fine.

  If you are still having the same issue, follow the procedure below and check it once.

  N ° 1)

  Temporarily disable anti-virus and firewall.

  Step 2)

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  Step 3)

  Complete all Adobe processes as creative cloud, CoreSync, AAMUpdater... etc from the Task Manager.

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then navigate to local > Adobe > OOBE. Open the OOBE folder and delete "' Opm.db ' file."

  Once you had deleted Opm.db file, launch Adobe Creative Cloud application and try to connect again.

  Always the same?

  1) go to C:\Windows\System32\drivers\etc and locate the file named Hosts inside the folder etc.

  Copy 2) host of the file to the desktop and open the same with Notepad.

  Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

• How can I register the VM on an ESX and their consumption of storage?

  I was asked for a list of all the VMS on each of our ESX and the volume of disk storage each uses.

  It is because we run more than 95% on storage servers and we need to identify what is using all that space.

  Thank you

  Steve

  Try rvtools.

  It's at http://www.robware.net.

  I don't know if it will print all reports.

  Also look at PowerGUI and the power supply of VMware and the 1.5 of VMware and PowerShell/VMware on Internet resources Toolbox.

  I have not tried them yet, but there should be something that will help you.

  HTH, Tom

• Databases of contacts: address book and address book - all

  Hello

  I have users who manage to get the contacts stored in two databases that are displayed in the desktop in the form of 'AddressBook' Manager and "Address Book - All".  I want to access programtically contacts in two of these databases.

  I seem to be able to access only one of these databases via the Java API.

  Does support the Java API to access the contacts in any of these two contacts databases?

  If not, is there a possible way to access both of these databases other than the Desktop Manager?

  Thank you

  Marty

  Use the PIM.listPIMLists to get a list of all databases PIM of a given type.  This allows you to access the data in each database.  Note that support for this has been added in BlackBerry device software 4.6.0 version.

• When you try to log on, get error - "the system event notification service has no logon. the remote procedure call failed and did not execute. »

  My netbook will not open a session because it can not find a certain file. She won't tell me the file. and when I try to go to safe mode it freezes... is there anyway I can just read another account another point? the message I get is "the system event notification service does not log. the remote procedure call failed and did not execute. "tips anyone? I care is no longer the files it contains. If I could wipe it off somehow to factory settings then would be too cool. his windows 7 starter edition

  
  Original title: hp netbook to log issue

  You have two options:

  • Perform a factory restore. Check the homepage of the manufacturer for instructions.
  • Start the computer with your Windows XP installation CD, and then follow the prompts. You will have to find the different drivers to match your hardware, for example a driver for SATA hard drive.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.