The bar of menus in Windows Vista is ugly. I can somehow it glass?

Similar Questions

• does not start the last bars of microsoft, PAGE_FAULT_IN_NONPAGED_AREA windows vista system

  Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details:

  -bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510)

  -tried to restart, all options on F8 does not.

  -No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work)

  -recovery disk proven system of point of sale without success.

  -every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod.

  -System is an ACER EX4630-4126

  -BSOD popped up all while surfing internet

  -is the new software installed spybot s & d

  -can not run memtest because it does not start up vista

  -tried running the memory diagnostic tool but it shut down on me before completing the diagnosis

  Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you.

  Ainjel Hello,

  This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations.

  You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below:

  Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA".

  http://support.Microsoft.com/kb/939720

  Do a restore from WinRE system:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards

  Savan Microsoft technical support.

• After reinstall Window Vista 32 bit, I can't move the slider to increase the resolution of the screen, how do I solve this problem

  My Dell Inspiron 530 sudenlly crashed, I could not start it. I called for the support of a group that I paid for. Technicians helped me start the PC, but they could not fix the screen resolution: in the display settings window, the cursor is on the left end of the bar, the low position and could not be moved. The technician finally asked me to save the folders files and reinstall Windows Vista. After the relocation, the screen resolution problem persisted. Technicians then reformat the HD, then reinstall Windows Vista again, the result was the same. We cannot change the resolution. Help, please.

  Hello Selim,
  
  I suggest to update the drivers for graphics cards and drivers from the chipset from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
  Troubleshoot monitor and video card
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

• the bar of menus in itunes is in a different language.  All the rest in English, but the bar menu is in Chinese

  the bar of menus in itunes is in a different language.  All the rest in English, but the bar menu is in Chinese.  How can I change it back to English.  I bought something when my vpn has been connected to Singapore and the menu bar has changed after

  CTRL + , < comma > to display the Preferences dialog box, the tab the leftmost is General, the drop-down list language is located at the bottom of the dialog box, English UK and English American are the ninth and tenth entries in the list, respectively. The OK button is the second from the bottom right. Close iTunes and reopen it to apply.

  Or, see change the language you see in iTunes - Apple Support.

  TT2

• Error code 646 when installing the automatic/important updates for Windows Vista (with Service Pack 2)

  Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?

  rivercitylady,
  Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
  Go to the Microsoft Download Center and search for the number of the update has failed.  Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security.

  Original title: am running Vista x 32

  Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security. If I do how can I download the microsoft firewall?

  Your quick response would be appreciated
  Edwardini

  Windows Firewall is delivered with and is part of the Vista operating system.
  You already have it and, therefore, you do not need, or you, can download another Windows Firewall.

  Microsoft Security Essentials (MSE) will close your Windows Defender because MSE has its own advocate and performance 2 defenders in the same machine allows to create conflict, not to mention redundant.

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• How can I keep the bar of menus in internet explore 9 open by default?

  How can I keep the bar of menus in internet explore 9 open by default?

  Right-click on an empty spot on the toolbar and check that the Menu bar.
  
   
   

• I can't download the service pack 1 of windows vista.

  Impossible to download service pack 1 for vista

  I can't download the service pack 1 of windows vista.  I didn't bother with it so far because I now have a new router and I download to configure the router.

  Download the SP1 installation file in a folder and then double-click to manually install Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=30

  Note: Service Pack 2 is also available: http://www.microsoft.com/download/en/details.aspx?id=16468

  J W Stuart: http://www.pagestart.com

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• How to open the system maintenance Troubleshooter in windows vista

  How to open the system maintenance Troubleshooter in windows vista?

  Hello

  Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

  However, you can run the fixit mentioned below for Vista.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  You can take a look at solving the problems of system maintenance in windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  For more information, please visit the links below.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Optimize Windows Vista for better performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.