The button action fails when there are af:showPopupBehavior

Similar Questions

• You cannot change the chart value axis when there are several types of graphics in a single diagram

  Illustrator can do graphics with bars and lines / columns, for example in the docs:

  

  http://help.Adobe.com/en_US/Illustrator/CS/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html

  However, when I create a chart like this, I seem to lose the ability to manually set the y-axis using 'override calculated values.

  To reproduce this problem:

  1. Create a chart as in the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers as well as the lines align perfectly - have a go until just less than 20, a up to a little less than 250, therefore it do not markers and the number of divisions on each side.
  2. Try to make the markers and numbers of divisions to the height, so in fact, the side that is going up 20 going up to 25 and has the same number of divisions on the other side.

  Everything I have tried does not work:

  • If I select the entire chart and go to the "Chart Type", I can not set the options for the value axis. In earlier versions, it's gray, in CS6 I can access, but clicking on 'OK' does nothing.
  • If I select the entire chart and chose the type of a chart, I can set options for the axis value, but that the selected chart type, and then applies the entire table.
  • If I use the direct Selection tool to select one of the series and open the "Chart Type" options, changing the options of the y-axis has no effect
  • If I use the direct Selection tool to select all series that share an axis and open the "Chart Type" options, changing the options of the y-axis always has no effect
  • If I use the direct Selection tool to select the Group of ticks axis itself, or the axis line and groups of ticks axis themselves, of axis labels, axis and graduations of the axis line, or axis labels, axis line, graduations of the axis and series of related data, etc., by changing the options of the axis also has no effect

  It seems that this feature is broken and it seems that the example in the manual has been carefully chosen to use a rare combination of numbers where it would actually look right.

  I thought about it. Like everything to do with the horrible ancient neglected graphic Illustrator tool, it is ridiculously clumsy and involves the caution around what is shamefully bad programming for a professional expensive product.

  It is timing - to do things in a sequence of rigid counterintuitive that seems not to work then meets at the end:

  1. Create the chart but, for now, keep all the same chart type. If you've already set to have different graphics types, put the same thing for now.
  2. Select the entire chart and in the main window of Chart Types, set the value to "Both sides" axis
  3. In the drop-down menu, there should be a left and right axis (or top and bottom...). Set the parameters of the value axis for these now. It will look like it does for a single axis, because it will not change the other axis - naked with her...
  4. Select the data series you want to use the other axis using group selection. Go to graph Type and the value of the y-axis to the other and set the chart type that you want. All of a sudden all be put in place.
  5. If you need to change the settings for the value axis, select the entire chart, set the whole chart type to a chart, change the appropriate value axis by choosing it from the menu drop down and the re - apply types of graph as above.

  (the bug is - it should not necessary to set the graphic object to only have only one chart of type in order to access the axis options of value for two different y-axis)

• Disable the generation of report when there are no returned by the query

  I would like to write a preliminary report trigger that disables reports generation when my main query in my data model will return no data. If possible, I would like to reuse the same query in the data model from the writing of a motion to double again.
  
  Thank you all

  Create a view for the main request. In this case, you just have to do it in the front trigger of the report:

  select count(*)
  into my_var
  from my_view
  where ...;
  
  if my_var =  0 then
     return false;
  else
     return true;
  end if;
  

  In where clause you can use the same settings as in your main report query.

• Is it possible to have a slide advances on its own when there are buttons on the screen?

  I wonder if there is a way to have a slide advance automatically when there are buttons on the slide, I want the eLearning course I've created for just the AutoPlay through all the slides.

  Thanks in advance!

  What do the buttons do? Just delete their point of pause and when they reach the end of the slide, and the exit action is set to continue, or go to the next slide, everything will play.

  Lilybiri

• Previous/next buttons in Windows 7 Media Player 12 disabled when there are videos in the playlist

  original title: Windows 7 Media Player 12 previous/next buttons disabled when there are videos in playlist works well with music files

  I have 3 computers to windows 7 that all exhibit this same problem.

  I have playlists since older versions of media center and when I play a video playlist with the previous buttons and next player will be disabled. If the playlist has audio files it next and previous buttons work fine.

  It has always worked in other versions I know that it is a feature I use all the time so I would have noticed

  Hi keith278,

  You can use Windows Media Center to play your videos.
  1. Click Start
  2. In the Search box , type Media Center
  3. Click on Media Center
  4. Select the photos + videos (you should see the library of images, Favorites, play and video library)
  5. Select the video library
  6. Cross the guests to add your video to this library folders
  7. Double-click the video file you want to play
  8. You should see the possibility of play all the

  Let us know if that helps.

• Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Yes, you can do it using a script. This code should do the trick:

  this.movePage (this.numPages - 1, -1);

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• vRA: identity device or vSphere SSO when there are multiple vCenters (each with their own SSO) in the environment?

  The installer: We have multiple vCenters each with their own SSO. We must build a minimum install vRA lab 6.1 and used the SSO to the vCenter which is the endpoint lab (and ended up having problems when this vCenter SSO had to be rebuilt and in turn liquid reconstruction vRA). Building on a vRA 6.2 Distributed Lab (based on deployment in the 6.1 reference architecture) to validate our production plan and decided to use the identity.

  Question: For a production buildout there is no reason not to use the device of the identity (scalability, performance, lack of HA)? If you are using vSphere SSO, when there are multiple vCenters one that should be used for SSO of vRA? If that vSphere SSO is never removed (say on the whole things are replaced by a central SSO for all vCenters rather than each on their own, or some issue needs to be rebuilt) is there a clean way to repoint SSO vRA without a reconstruction?

  Post edited by: RebeccaW (removed unrelated to Postgres question)

  What I did in this case is to build a fresh cluster SSO using vCenter SSO and pointing vCAC on this one. It becomes my main source of SSO and I slowly vCenters point and other components to it overtime. You usually put vCAC SSO signed certificates and generally I find people vCenter SSO deployment in this way. To remedy this trying to modify an existing SSO vCenters and risk having to reinstall your VC because you missed the CERT, simply create a new. This also alleviates a changing overtime vCenter and spoil the vCAC SSO. The unit of identity cannot be clustered or joining existing areas of SSO. So if you are looking for HA and scale which probably does not cut it.

• How to hide a column in the report when there are only zeros.

  Hi Experts.,.
  
  Is it possible to hide a column in the report when there are only zeros.
  
  Thanks in advance
  Vincent

  Vincent Krishna wrote:
  Hi Experts.,.

  Is it possible to hide a column in the report when there are only zeros.

  Thanks in advance
  Vincent

  No out-of-the-box, but there are several workaround solutions if you want to continue an any of them:

  (1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.

  (2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.

  (3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.

  Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.

  When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.

• OAF Page expand to change the button action

  Hello

  We have a standard page of the OPS in iProcurement, where there are a standard change request button, which redirects to another standard page. We want to change the button action to call another custom OAF page. Please let me know how to do the same.

  Attached screenshot for reference

  Follow the steps below to create a button through customization.

  1. click on customize page where you want to create an element.

  2. find the area where you want to create

  3. click on Create icon, which opens a new window.

  4. Select the style of the item as button and give the values for the element.

  Browse link below

  Oracle concepts for you: Add a button to a Page of the OFA

  Also paste the error if you get none after following steps above.

  BR, FLS

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• Why update when there are known bugs

  I wonder constantly up-to-date when there are bugs in it, it's not logical to me at all, this 9.0 will crash after a while because it has bugs you admitted that

  Another reason for updating, it is that each new version contains security updates that are not in the other. If you can help protect your computer with Firefox (and other software like Windows) in day.

• I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  When you import the and with what application?

  If you use the new pictures check box in the import window, as shown in this screenshot:

  

  If you're still using iPhoto then is that you say not to remove from the iPhone until you start the import process.  This window will open so you can choose whether or not to remove it from the iPhone:

  

  Finally, if you use Capture picture to import your photos the box will be in the lower left corner of the window:

  

  

• Why was the full Inbox folder when there is no message in the folder of outlook express?

  Original title: failure of Outlook Express

  I apologize if I am in the wrong category, but there isn't one for Outlook Express. I encountered a strange problem with OE. My client always uses OE for their emails and all of a sudden a person has lost the ability to receive emails. After some research, I found that their Inbox.dbx file exceeded the capacity of 2 GB. Juggling which corrects the problem.

  But my question is why was the folder Inbox full, when there is no message in the folder? When I opened the OE to try to resolve the problem, the Inbox was empty! Second question is how can I keep this does not happen?

  [Transferred from Internet Explorer]

   
  I do not use Outlook, but it has nothing to do with archiving. Only, you do not see messages once you remove them, but they are still on your drive hard until you compact.
   

• Keep the windows of sleep when applications are running

  Is it possible to prevent sleep automatically when there are programs running Windows 7? I will be pretty much want only this to happen when the mixer is made something OR Steam has download something. Is this possible?

  Hello

  This problem can occur because of incorrect system settings.

  I'm sorry to know that you are facing this problem.

  Follow these methods and check if that helps.

  Method 1.

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Open the power Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-power-troubleshooter

  Method 2.

  Make sure that you are logged on as an administrator. You can create a new power plan and make sure your new plan as a default to check if that helps.

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows/change-create-delete-power-plan-scheme#1TC=windows-7

  Keep us in the loop to help you further.