The button MC working, but no hand icon

Similar Questions

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• I tried dnlding flash player @ least 30 times... Most of the time he worked, but only for 1 session... I even disabled my AV, how to keep in my system or get HTML 5

  I tried dnlding flash player @ least 30 times... Most of the time he worked, but for 1 session... I've even disabled my AV, how to keep in my system, or get HTML 5?

  Hello

  How are you trying to download Flashplayer?
  I suggest that you follow the methods provided and check if it helps to solve the problem.
  Method 1:
  See the link, then run the Fixit. This will help remove all traces that might have left a previous installation of Flash Player.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
  Method 2:
  Step 1:
  Perform a clean boot and install Flashplayer. Clean boot to disable non-Microsoft services which can otherwise cause conflicts during installation. Check out the link and follow the steps.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Important: after you have completed troubleshooting. Make sure that you follow the steps in the article to put the computer from starting in Normal mode.
  Step 2:
  See the link, download the application on your desktop computer and then run the installation.
  
  http://get.Adobe.com/flashplayer/
  Alternatively, you can contact Adobe support on this issue. Check out the link.
  Flash Player Help / installation issues. Flash Player | Windows

  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

   

   

• When I hook compruter to the tv it works but it does not not to erase the s video cable

  When I hook compruter to the tv it works but it does not not to erase the s-Video cable

  Hello

  1. are you unable to connect the TV to the computer via the S-Video cable?

  2 what exactly happens when you try to connect the S-Video cable?

  3 how you have connected the TV to the computer?

  4 do you encounter issue with the clarity of the video when it is connected with the S-Video cable?

  Please provide more information on the issue so that we can better help you.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• Windows 7 says I need to install this driver for the scanner to work, but I can't. HP m1522nf driver wia

  Windows 7 says I need to install this driver for the scanner to work, but I can't.

  As for all the HP drivers, simply visit the HP support site http://support.hp.com/, enter the model number in the search box, click on the link drivers and you're there.  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3442754&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3442750

• The mouse stops working but left and right buttons still work.

  I'm having a problem with my mouse, the cursor will stop working, but all buttons still work. I tried another mouse, uninstall and reinstall the mouse driver updated and change USB ports, so it is not automatically turned off. Nothing works I found so far.

  I found something here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-64-bit-mouse-pointer-not-moving-but/fc581ad9-87ac-410e-a7ae-55ffcf626f03?db=5

• All of a sudden, I can't create a new tab. The button is there, but when I click on it nothing happens. Firefox running 30.0

  I only have the tab open but still impossible to create a new tab by clicking on the button "open a new tab. If I'm at a Web site and right-click, I can tell the page to open in a new tab. But I can't get the new tab button to work. It will also not work Ctrl-T

  Inform your employer about this problem. The developer will have to address this add-on attachment.

• Split 13-r010dx: the button "On" works intermittently

  I have to press the button 'On' located at the top right of the screen on my HP Split several times until I get an answer. It will work eventually, but sometimes I have to press five or six times. It doesn't make a difference if I plugged in or on battery power.

  It SEEMS to work better when the screen is moved away from the keyboard, but maybe it's just a coincidence.

  I've owned the product for about 6 months.

  Thanks for any help you can offer!

  According to the message that you have recently published, I want to confirm that it could be a hardware problem and the power button needs to be replaced. I highly recommend you Contact HP immediately to Technical Support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• M1132 don't wake. When I hit the button start-stop, but it then doesn't not scanner/photocopy

  Hello

  I just bought this Laserjet M1132 MFP.

  He goes to sleep and the next time, it won't wake up. I jiggle with all the buttons on the machine, without exploitation. I use win8. Preferences has nothing on the sleep options.

  When I click on one = off button shut down shut down and restart, it prints. But then it doesn't scan or photocopy antything, it does not do anything, just blank pages.

  I need to plug in the printer power cable off, hang it upwards again once, and then it works.

  Really frustrating feature

  Well, directly plugin was not the solution. I updated the win8 Office and downloaded and updated the firmware of the printer from the HP website.

  Now he'll still sleep and yet not wake when I have something to print, send, but hit the on/off button wakes up the computer and it scans and photocopies now after the update of the firmware and update the computer.

  Thus, no congratulations, but thanks

• Problem: The button States works perfectly in preview mode; It does not work when published through the source of catalyst for business.

  I tried every way I know to create a button States in Adobe Muse CC 2015.  It works perfectly in preview mode, but it does not work effectively when published on a web site using the Business Catalyst (filename.businesscatalyst.com) process.  The problem, in my view, is that the text used in the button does not accept state changes.  I tried every workaround that I think might work, but nothing seems to work.  I even deleted the Business Catalyst site and then he came again, but it does not work.  Any information on how to fix this problem would be appreciated.

  I think I found my problem.  My original links have been on the "master" page  When I placed a link on a page of content object, Business Catalyst was able to translate the code correctly.  It is a disappointment because I need to duplicate objects on the pages, but at least it works.

• When you edit a composition in the browser, click the button is there but does nothing.

  I'm testing a site in my browser edition a publication. I see edit it and click the buttons on the triggers, but the click button does not take me to his bed or a link. Is it because I am trying to edit on my own computer rather than the customer is going in? I need to see how this feature works if I put it to my client to change a slide show or a composition.

  Thank you

  Hello

  Edit on your computer makes no difference. You should be able to change it on your computer. What is the URL of the site?

  Kind regards

  Aish

• Open the new browser works, but cannot change the cursor to reflect that it is clickable

  Here is the link to my site - www.localwally.com/napatest3
  
  I wanted to make all the pictures on the clickable site for a larger image - but I didn't have to create separate Web pages for each of them. And I went to the BEHAVIORS added "Open the browser click" - it works, but I can't find a way to change the cursor to the arrow by hand to show people that this is a clickable link. Here is the code below - any ideas? Don't you worry that when you click on it it does not return a pic. I didn't upload them for this test. You should get the new browser without content inside.
  
  Also, I would love to add a caption to the photo, but does not know who is!
  
  Thanks for your help - Gary
  
  
  "< td width ="419"height ="318"> < div align ="left"> < span class ="style25' ondblclick = "MM_swapImage ('Image1 '", 'reynoldsfamily_800.jpg', 1) "> < img src ="Renolds_400.jpg"width ="400"height ="300"id ="Image1"onclick =" MM_openBrWindow ('reynoldsfamily_1000.jpg', 'ReynoldsFamily ',' width = 1000, height = 70 0') "/ > < br / >
  Sipping a chard at Reynolds Family Winery, a beautiful look on the Silverado Trail < / span >

  > Is there an easy way to create this code in other
  > that cut and paste?

  Learn the HTML is the most important thing you can do if you are serious
  on the use of DW.

  There is an easy way to do it-

  * Select the image that triggers the behavior
  * Enter it ' # ' in the field of the property inspector link
  * When you tab off the field link, you should see appear on the
  Tag (at the bottom of the document pane) selector
  * Click the tag in the tag selector and apply the behavior

  That you will get 90% of the way. There are two additional things you
  can do after that-

  1 copy the link in the image you pop up and paste it instead of
  the "#", you added to the link field
  2. Add '; return false;' at the end of the behavior

  I believe that David Powers has an extension called "Smart Link" that will do
  These for you two. Google it...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "garynng" wrote in message
  News:g3h10m$OIJ$1@forums. Macromedia.com...
  > Thanks - a follow-up question - y at - it an easy way to create this code
  > other
  > that cut and paste? I have a lot of pictures on other pages
  > and
  > need an easy way to do it. I created the original code by clicking on
  > the
  > Option of behaviors on the right side of DW.
  >
  > Really, thanks for your help. My daughter told me about using DW versus
  > coding myself the old-fashioned way and I'm happy she did, but it's a bear
  > try to learn this stuff!
  >

• MacBook Pro the Spill - currently work but with minor problems

  As the title indicates, about three weeks ago, I spilled tea on the left upper quarter of my keyboard close to the ESC key.  The laptop immediately power off and because of cracking noises that sounded not good.  I put upside down and let the water dry for a few days then put Kleenex tissue on top of the keyboard and shut up for one more day.  I turned it on the next day (stupid I know but I am a student, he uses it often) and it showed a folder flashing with an exclamation mark on the subject.  I immediately turned off and he let it harden for three days.

  I left for the weekend and I tried it turn and surprisingly it works fine.  I was able to connect and saw the splash screen and shortly after it stops immediately again.  I let settle again for a few days and tried again and this time it has begun well.  The Macbook has worked for the next two days, however, I noticed two things:

  (1) just below the trackpad, from time to time would make noise very hard and rough, sounding like two things rub together.  It's a very unpleasant noise, and even if it isn't that strong, it is noticeable and certainly doesn't sound good.

  (2) on almost all of my keyboard are a few bumps on each key, almost like the dried water particles, however, they don't come off the coast.  If you rub them completely off it tears the part of the key and a layer of the current key will detach a black space on the key.  I realize it's not big problem, however, do not know the cause of what I will not be spilled tea on all keys.

  I took my computer to the Apple store, and they told me that everything works well.  Every thing in the Macbook got a green check mark when they tested and they said it worked perfectly (crazy, I know.).  They said that there was no problem and I could continue to use it as usual.  However, the genius bar apple guy said, it was the first time ever, he saw the bumps on my keys, however, he said, it's fine that you can't even feel them when entering.  However, only two days after a visit to the apple store, my macbook stopped on me when I was with her.  I tried to power it back on and it became like a safe mode where I was asked to select the HARD disk drive (I think).  I don't have an option to make attempts so and after a lot of google, I thought that my Macbook was done for good.  However, as I was on the phone with apple support, not even an hour later, at random, he started to work very well and worked well since the incident.

  Now, this is where I ask my question, because my computer is still random scratch harsh noises under the trackpad, should I worry or continue to use it?  These sounds are completely random and sometimes it happens at all for a day and then sometimes will get 5 to 10 a day, during anywhere from 3 seconds to 20 seconds of scratching and noise.  In addition, suggestions on the keyboard?  I know this isn't a problem, but it's just a little weird on the keyboard and to be completely honest, baffled myself and the representative of apple engineering.

  Thank you very much for your help!

  You should be worried about. Liquids and electronics don't go together well. Damage may increase to erode over time as components. Make sure that you have a backup of all your data because your computer can die at any moment. As you work back up your data continuously for the same reason.

• My child has hit the buttons &amp; changed setting but I don't know how to cancel these selections.

  It gives photos a look blue Saturation. However I looked on the side toolbar and all levels were normal or 0. I tried the tab edit, cancel, but her does not work either. I exported just she & he seemed normal. In the edit mode blue road was saturated

  smashmouth98 wrote:

  the shadow areas are blue & light sections are red.

  Press "J" key to turn off the clipping indicators.

• DV9500T CTO QUICKPLAY BUTTON MUTE WORKS BUT NOT WILL SWITCH COLORS - BLUE STAYS ALL THE TIME

  I've upgraded to Windows 7 and everything works except the change color button mute of QuickPlay.  It remains blue all the time EXCEPT at startup when it becomes red or orange, then back to blue.

  He cut the sound, but in low light conditions, it's frustrating to always have to "wonder" If the sound is muted or not.  I tried several drivers but nothing works.

  HP QuickPlay Web sp38361 update

  sp44777.exe

  sp38171.exe

  It drives me crazy because I managed to install a driver on a HP of friends with no problems.  It is a pilot who has corrected the error of acpi\hp0006 in Device Manager.  After this installation, its button mute changed to red (or orange) and the problem was solved.  I am showing no abnormalities in the Device Manager.

  Thank you

  Jeff

  HP DV9500T CTO

  Windows 7 Ultimate 32 bit

  4 GB of RAM (shows only 2 GB)

  wimblus ,

  Bingo, I went on the Realtek site, downloaded the driver, installed and now I get the red button when the sound is muted.  I want to verrrrrrrrrryyyyyyyyyy thank you very much for this tip.

  I also want to thank all those who contributed to a solution to my problem.  Your efforts may not possibly be offset by a simple thank you, but I hope that karma you all extended to me in my research goes back to you in spades.

  Driver installed:

  Codecs Audio high definition

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Vista, Windows7 Driver(32/64 bits) driver only (executable file)

  R2.47

  9/4/2010

  55873 k

  Thanks wimblus and everyone.

  Jeff