The camera image compact Z3 freeze

Similar Questions

• View of the camera Image

  Hello

  I've been using Lightroom for the past two weeks as a possible new addition in the old workflow...

  The main problem frustrating I feel however is that when I check my photos in develop mode of loading and the small 'loading' box appears at the bottom of the photo and then it seems that it automatically uses a "Preset" when I don't want it.  90% of the time the image was better before lightroom brought these changes to the image... it appears dull down exposure, lift blacks a little when I really don't want it.

  All I want to do is edit of the pure raw of the camera image.  I tried a number of things such as turning off automatic tone settings but it just keeps changing my images when I don't want it.

  I am probably doing something stupid here so any help will be much appreciated.

  See you soon.

  The change you see is the expected behavior, and the reason for which you can read on http://forums.adobe.com/thread/358016?tstart=0

  You can, of course, set the value of the default cursor on what you want and then set it as your default camera. For example, you mention that the deafult rise the blacks a bit. Correct for this just the black value on what you think looks better then go to the menu in the develop module and choose set default settings...

• How to record the camera images took without a memory card?

  Camera can take some pictures while no card inside.

  Question:
  How to save these images taken by a camera without suitable memory card?
  These images can be transferred to a memory card or no matter what device to a PC?

  Thank you.

  Hi Diano,

  We're sorry, but Sony cameras that do not have an internal memory cannot save pictures taken when there is no inserted memory card. The shutter will come out as if it takes a photo, but it will be automatically deleted after. The buffer of the cameras are just enough to save your system settings and exposure.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region through http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Sony camera detected on USB but not found (visible on the camera) images

  I plug my Sony Cybershot, I did successfully for 4 years and now, suddenly, Win7 detects the camera as usual but said there is no images - well they are clearly visible on the camera.

  "show the hidden files and folders" is perhaps not necessary, please also uncheck "Hide protected operating system files" is two or three lines under 'display files and folders '.
  apply/ok to close the window
  and please open it again to see if it resets.
  If it wasn't still not checked then check your memory card.

  Please kindly share the result.thanks

• Cordova 3.4 / file plugin 1.0.1 - resolveLocalFileSystemURL for the camera image

  I'm having a problem with some code that runs on Android 2.3 4.4 and iOS 5-7.  In short, he calls the getPicture of camera api method which managed returns a file URI.  An example of this URI is as follows:

  file:///accounts/1000/shared/camera/IMG_0000025.jpg

  He then took the file URI and trying to solve an entry of this file as follows:

  window.resolveLocalFileSystemURL (fileUri, success, failure);

  Note that it is now URL instead of the URI.  URI is deprecated since version 1.0.0 of the plugin file.  The recall of the error (failure in the example above) is always called.  He went to an error object as the API said it must. It has 1 property on this subject called "code" but instead of being one of the numbers that indicate what kind of file error happens the property code is just null.

  I also tried to change the URI to exclude the file:// to the path part, but the resolveLocalFileSystemURL then returns an error with code 5 (error coding).

  I made sure that I added this to the config.xml:

  And I also made sure that the config.xml file after running a build of cordova has permission for a shared access:

  <>ermissions >
     <>Ermit > access_sharedermit >
     <>Ermit > read_device_identifying_informationermit >
  ermissions >

  Someone at - it overview of what could be the cause?

  Thank you.

  Hello

  Thanks for the report! I connected a problem to make sure this is fixed in the next version of plugins.

  https://issues.Apache.org/jira/browse/CB-6242

  You can work around this by using instead the resolveLocalFileSystemURI:

  if (cordova.platformId === "blackberry10") {
      window.resolveLocalFileSystemURL = window.resolveLocalFileSystemURI;
  }
  

• What can I do on the camera crashing on zte Open firefox

  The camera app made o k for about two weeks but that icon now pressed the screen remains black / white switched on by pressing the camera image appears a message saying "camera comes crashing" reset I tried but nothing helped, I should send it it back or is there a solution.

  Hi Mohammed sorry for the delay in response to I am new to the Forum and could not find my way. The day of receipt of the answer to my question, I did the hard reset twice just to make sure that the camera has failed the first time, second time was also without result. The message "camera comes from is crushed" appearing after that urged the camera icon at the bottom of the empty screen. However, the next day I was checking the phone again and to my surprise the open unit and was able to take a picture without an accident, so can only assume the hard reset helped the camera works again but the result was not immediate.

• Detect dirt on a picture of the camera with Vision Assistant

  Hello

  I want to test a camerachip cleanliness.

  I tried to make a detector of dirt for a camera with Vision Assistant 2011 SP1 image.

  I modified the cell analysis of the Solution Wizard.

  My Vision Script is not able to detect any dirt pirate on the camera Image.

  Maybe you tips to optimize my other scrip alternative.

  You can use "Equalize IMAQ" (could be found in the service Table of the Vision Assistant research) right after you open the image to spread the histogramm on any bit depth.

  Christian

• How to display all the other images in the image indicator

  Hi all

  I use IMAQ for capture and record high freq and images high resolution. I have an indicator of image directly from 'Image Grab acquire'. Thus, the indicator image displays images at very high frequency too. To display frames, but not necessarily all alone (enough so that the operator can see what's happening). So, I wonder how I can view, say all the other images (for example all the odd/even number of images), or jump on two and show the third?

  Any help will be appreciated!

  Thank you!

  Wenlong

  Here are some general observations.

  • Image acquisition is "a horse of a different color" - in contrast to many other I/o devices, the memory containing the data (here called the "buffer") is handled by the driver and is not directly available for LabVIEW.
  • I'm guessing that you are using hardware OR video, because you use the IMAQ functions (I used only IMAQdx).  Is this true?  What camera do you use?
  • The (probably) "Awakenings" IMAQ extraction buffer herself to the camera (I say 'probably' because I don't know the hardware you use).  This means that While the loop containing it will work at the rate of the camera images (so you can easily calculate the frame rate, as your example code).

  This looks like a routine NI Demo, so I think that you don't have much experience with the treatment of Vision.  If you have a lot of other LabVIEW experience, you should be able to make the leap to the vision, once you have the idea of the functioning of the buffers.  Unfortunately, there isn't much in the way of tutorials and white papers on Vision than on other subjects of LabVIEW.

  Yes to your question - how to view every Nth frame.  This is the loop key (which arises directly from your code):

  

  As menioned above, this routine is 'clocked' by the function of extraction buffer.  What you do to display each image is th is to place control of the Image inside something like a Case statement that "triggers" each nth time.

  Here is a version of 'Nth' of the loop above (details omitted)-

  

  We always roll the filling of each buffer with a frame loop.  But we then use the whole function divide to select the nth image (those who have a remainder of 0 when i is divided by n-th) and of the 'image' line (it does not really an image) for 'Image' control, with the other case being "Default" (for all the other Valentine go) and nothing inside.  Thus each nth time in this loop, the output of the extraction buffer is the wire to an Image (and displayed), the other N-1 times the thread is going nowhere.

  Bob Schor

• GigE camera - image grab bars

  Hello world

  I use or acquisition of vision to capture images of a GigE camera.

  I get images just as I trigger the camera - rates so so good.

  All other photos shows a few black bars.

  Anyone have any idea what it could be?

  It is not the hardware, the camera works perfectly with the shape of the manufacturer's software development kit.

  Thanks for any help

  Looks like an incomplete picture, this could be caused by the missing packets.  To prevent missing packets when the acquisition, you can do two main things: the size of the packets configured on the camera may not exceed what the network card can manage and ensure that the bandwidth of the output of the camera image data do not saturate interface band bandwidth.  I would reduce the packet size of camera for 1500 initially to determine if the size of the package is the cause of the problem.  You can throttle how much data that the camera can send by manipulating the interpacket delay, some manufacturers have a very handy feature called StreamBytesPerSecond.  According to what mechanism, you can use, increase interpacket delay or reduce StreamBytesPerSecond.

• Access to the camera of the JSR-135 after standby on 8520

  Hello world

  I have an application that uses the JSR-135 to access the camera on a 8520. The code I use is correct (quite similar to the the here: http://docs.blackberry.com/en/developers/deliverables/17968/Take_a_picture_in_a_BB_device_app_122820... ) and it works most of the time.

  But sometimes, when I try to access the camera after that the phone is in standby mode, no image is displayed on the screen and getSnapshot() returns no image data. It turns out that this also happens with the native camera application (the user interface is there, but no camera picture), except that the native camera app finally gets the image of the camera (it can take from 1 second to 5 or more). Once the native camera app becomes the camera image, this also works in my MIDlet.

  I can't use the camera application native from my app needs a user interface customized for the screen where the snapshot is taken. I tried to call and close the camera application before showing my screen in the MIDlet, but it is not very pretty and I have to wait an arbitrary amount of time (which may or may not be sufficient to return to the screen), or try taking snapshots with the application native camera up to what he was able to know that the camera is available that is not very satisfactory.

  Prevent sleep mode is not an option since my request is supposed to be running for a whole day.

  Is this a known bug? Is this a hardware bug of my device? Y at - there a better solution?

  The device information:
  8520 with OS v5.0.0.592 (Platform 5.2.0.64)
  no update available

  Looks like she could be related to the hardware problem described here I'll have to test it a little more, but by pushing the lens seems to have solved the problem.

• camera images are not sent

  at the beginning

  I am able to send the camera image by clicking 'share' and choose the gmail account that I myself used

  (so I sent the photo taken by the droid to myself)

  I don't know why? (I did not have any configuration or sophisticated question I remembered)

  Since 2 February

  all my photos 'sharing' are not received by my gmail account

  I clicked on the GMAIL icon on my droid, discovered these emails 'sending '.

  and not really sent on

  Could someone help me? (I tried calling Verizon but surprisingly less-than-results-oriented, in the store or the 1-800 number)

  Now I can't send photos (share my photos)

  I don't know why they are stuck in the Outbox.  A solution I've seen is this to erase all your emails in your Inbox.  For some reason any it helped others.  The other thing you could try is to text to your email address.  Instead of putting a phone number the on any field type in the e-mail address you want to send it to.  It has always worked like a charm for me.  I hope this helps.

• Does anyone have the imaging software photo to the camera HP 315 copy the picture from the camera to the pc?

  I got a digital camera HP 315 (circa 2000), but without the CD-ROM containing the photo imaging software to copy pictures directly from the camera to my pc.  I installed Windows 7.  Currently, I can copy directly from the card compact flash on my pc, but it is sometimes easier to copy directly from my camera to my pc.

  Hello

  As mentioned above, the old software may not work at all. You can try the following software:

  http://ftp.HP.com/pub/softlib/software2/COL3927/SJ-13026-3/col3927.exe

  There is another way to transfer photos to your computer, because the camera uses the card see You can also its Manual:

  http://h10032.www1.HP.com/CTG/manual/bpy60034.PDF

  Kind regards

  PS. New digital cameras released each month, you can buy one for less than $100 with a better quality and faster now.

• How to freeze the camera animation

  Hi all

  I have several layers of film and an animation camera. I need freese all layers for a few seconds, including camera movements. To freeze layers of film that I increase the length of the composition, add two key images next to each other and pass the 2nd and last keyframe, as needed.

  What camera? I can't enable the remapping to camera volume. What is the best way to add the identical frames in the middle to freeze the camera?

  Thank you

  I think it's what you're looking for, arrange keyframes. See the help files. I'd give you more if I didn't get back to my iPhone.

• Lightning to a resolution of the camera the incompatible SD card reader image

  I use the lightning to drive camera SD card with my iPhone 6 more (iOS 9.3.5) and MacBook Pro running Photos:

  Version 1.5 (370.42.0)

  Digital camera RAW 6.20 (856)

  Digital Camera Support RAW 6200 (233)

  Import RAW files from my Olympus EM10 on my iPhone, and then when I discovered the images in the Photos on my Mac I see incompatible resolution information.

  These are two consecutive images taken with identical settings...

  

  Drag the two images of Photos on my desktop (export in JPEG) then they have the correct resolution information...

  

  Also interesting. If I import these pictures directly on my Mac via the built in card reader, I do not see this problem.

  OK - when you import on an IOS device (the exact details are better ask in the forum iPad since it does not involve the Mac or Photos for the Mac somehow - it's strictly an IOS feature) in certain circumstances the maximum resolution is 2400 x 3200

  Your best solution is to import directly to your Mac

  LN

• How to download images from the camera at the top of the Tower

  I just need to upload photos of a family on my counter top party

  Just connect the camera and syncronise it then copy all the images you want and paste it to any folder on the PC.