The case of the ambivalent remote

Similar Questions

• Cannot control portable iTunes with the new remote application

  Hi all

  Hey I just got the new remote application and it seems to have the ability to control your applets. The former used for you to control iTunes on your laptop remotely.  Is it possible to do this with the new application?

  Thank you

  Pete

  I have three Remote apps made by Apple on my iPhone, to control iTunes has a blue icon on a white background with a white play button. Keynote remote has a picture of a desk, and the Apple TV remote is grey and black with the logo of Apple TV. You want the first.

  TT2

• Siri new Apple TV remote will work on the old Apple TV (I lost the original remote control).

  The new remote Siri will work with older versions of the Apple TV. I lost the remote of my older generation 2nd Apple TV and wondered if the new remote would work or I have to buy an older remote.

  N ° you need remote rained money. If you have all the iOS devices there as a remote for those application.

  TT2

• I can control my Apple music through the Apple Remote app on my iPhone and iPad?

  I can control my reading of Apple's music using the Apple Remote app on my iPhone and iPad?

  Yes, read this article on the basis of knowledge of Apple on how to do...

  12 iTunes for Mac: use the Remote app to control your iTunes library

• the apple remote app installed on my air of 6s and iPad iPhone does not work to control the apple tv

  the apple remote app on my iPhone 6s and iPad Air, home sharing is enabled on all devices and the MBP, airplay works for mirroring via tv application, however, I have over the display of the remote app to control the apple tv, though the library, iI figure on my MBP

  Hello Pmilkes,

  Thank you for using communities Support from Apple!

  I understand that Remote on your iOS devices does not longer work to control your Apple TV. To begin troubleshooting this situation, I recommend you to read on the following article and through the implementation of the process to ensure that your network and devices are configured correctly.

  Set up remote for your iPhone, iPad or iPod touch - Apple Support

  See you soon!

• HP Officejet Pro 8610: two printers on the same remote network model will not be printed, but local will be

  I have two furniture stores that are run on a windows sbs2012. Recently, both off my all in printers are down in the same week. The first was at the location where the server is actually housed. I bought a HP Officejet 8610 and managed to put in place without problem a lot via a wired network connection. So I decided since who went to buy the same model for my remote which is also connected, but it has a wireless access point. I was not able to get anything to print from my main software called profit systems. I can get things to print to the shared remote drive. I tried uninstalling and reinstalling, but even if connected as long as administrator I get a error that reads "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. I put it up as both just and redirected network and it shows it as ready in the State, but after it clears the queue that nothing prints. I checked firewall settings and all with HP is checked on. I'm pretty computer but I am full of ideas. Help, please!

  So after that I lost two days of my time and more than two hours of my time of I.T. guys it came to our attention that the driver IS NOT SUPPORT this model of HP JO 8610 redirected remote office printing! HP really, really?  So we have to install the driver 8600 on the server and local computers to get things to print. Problem solved, but it's just sad that this was the problem.

• Can I use the supplied remote Commander RMT-835 with the 18-200 on NEX-VG30 powerzoom?

  The NEX VG30 comes with the SALT-PZ18200, which has an electronic zoom that can be controlled by a lever on the lens and the camera. The camera also comes with the IR remote control RMT-835, which has a zoom button (which works on the other handycam to control the zoom). Now can I use the RMT-835 to zoom with the SALT-P18200 on the VG30 NEX? Can someone try that already has the VG30?

  Thank you

  Michael

  I tested the SELP-18200 on NEX-VG30 zoom control, and the RMT-835 zoom buttons can control the motorized zoom.

  By default, the remote control and the camera body zoom controls activate digital zoom. You must go on [MENU] - [camera/mic] - [Zoom lever] and select [Power Zoom] so that you can control the power via the remote control zoom and the camera body.

  If my post answered your question, please mark it as "accept as a Solution.

• Somehow a storage tab expanded appear in c:\ drive properties in windows xp? What is the function remote storage tab?

  Somehow a storage tab expanded appear in c:\ drive properties in windows xp? What is the function remote storage tab?

  Hello

  1. Have the software installed on the computer before the show?
  2. Have you enabled all services or no changes to the computer before the show?
  You can download a page so that we can see exactly what is happening.
  http://answers.Microsoft.com/en-us/feedback/forum/suggest/how-to-insert-an-image-into-a-post-at-answers/bdae0306-c3cb-4d31-ace9-7281ea1a8a73
   
  For your reference:

  Remote storage is not available on Microsoft Windows XP, Windows Server 2003, Web Edition, or Windows Server 2003, Standard Edition.

  http://support.Microsoft.com/kb/816588

  What is the removable storage?

  http://TechNet.Microsoft.com/es-ES/library/cc782595 (v = ws.10) .aspx

• Is it possible to restrict the Office remote to only the group "remote users?

  Hello world

  Bit of a strange request. Within our work environment, we try to limit as much as possible to Remote Desktop. However people regularly have administrator rights in order to do their job, due to some programs and restrictions works not very well.

  What I'm looking for is essentially:

  -Nobody has the rights to remote desktop, USERS in the group "Remote Desktop"

  -It is administrators - they can't have these rights

  Is this possible? My understanding is that permissions are cumulative, if for example Admin is user of remote desktop and then some. I would like to somehow separate these (whether by a GPO or other).

  Any advice or suggestions are appreciated!

  Hello

  You can display the query in the technet forum for assistance.
  http://social.technet.Microsoft.com/forums/en-us/categories/

• How to set up the Office remotely between two pc in different countries

  Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...

  I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla

  I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
  How can I do
  Thank you

  * and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance) 

  
  
  looking for help

  First of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.

  ***********************************

  Assuming that the computer is running Windows 7 Ultimate or Pro...

  The main steps are...

  • Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
  • If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
  • Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
  • If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.

  You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.

  http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm

  Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).

  Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/ClienttoServer-UseServerAuth.jpg

  Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.

  http://support.Microsoft.com/kb/969084

  General help written for Vista, but close enough to Win 7...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  MSFT Win 7 DRC help pages...

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  ***************************************

  If the remote computer runs Windows 7 Home Premium...

  Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.

  http://explore.live.com/Windows-Live-2011-system-requirements

  You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.

  http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac

  http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI

  If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.

  https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033

  You can, if you wish, also use an existing Live ID or create a new, but this is your choice.

  I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.

  Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 402 & Thierry = 25AB668DA65C8FBE! 118

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 401 & Thierry = 25AB668DA65C8FBE! 118

  Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.

• Authentication failed because the third remote has closed the transport stream

  I am trying to download a zip since an external public server example: https://xyz.com/abc.zip using the webclient.downloadfile () method in an application console, but I end up getting the error below

  "The underlying connection was closed: an unexpected error occurred on a send" and

  "Authentication failed because the third remote has closed the transport stream.

  I tried several solution, but nothing helped. I have no control over the external server. When I manually navigate the link on my browser, I get that download the file, namely the external server is fine and the problem is downloading from the code.

  I tried to put

  System.Net.ServicePointManager.SecurityProtocol = System.Net.SecurityProtocolType.Tls | System.Net.SecurityProtocolType.Ssl3; but it does not work.

  Please suggest

  Hi Anil,

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• I want that my users who log on to the virtual remote desktop to use the one I put in this image and not their local keyboard

  Original title: the remote keyboard language

  Hello

  I connect to a remote virtual desktop. My local computer uses a different keyboard language than the remote.

  I want that my users who connect to the virtual remote control to use the one I have set myself in this picture and not their local since keyboard only supports us that we provide in the virtual, not on their local machine.

  I've tried the "Reg" IgnoreRemoteKeyboardLayout key, but I've been the opposite. Who closes?

  Is their a way to force the RDP to use the remote keyboard and not local?

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions using the remote keyboard on the Windows computer. So, please follow the link below to post your query in the Technet forums, because they have more expertise on this issue.

  TechNet forums

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  I hope this helps.

  Thank you

• Unable to take the PC remote access

  Original title: remote PC

  IAM not able to take the pc remotely

  Hi Ananthalakshman,

  Thank you for visiting the Community Forums of Microsoft.

  Your question seems to be more complex than what is generally answered in the Microsoft Community Forums. It is better suited for the professionals on the TechNet Forums. Please ask your question in the Forums TechNet Windows 7 networking from this link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro#Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc&content=search

  Hope it will be useful. You can publish all your queries related to Windows on Microsoft Community Forums and we will be happy to help you.

• Impossible to use the IR remote control after you install Touchpad

  I have a C40 that was used with the infrared remote control successfully for months. I recently installed a Touchpad plugging directly into the 2nd port eNet.  The software is underway at 6.2.0.  Immediately after that I have connected and started using the touchpad, it was noted that the unit no longer meets the IR remote.  The base of the camera flashes when ar buttons pressed on the IR distance indicating that the IR signal is received, but there is no response from the codec.  Is this a "feature"?  Can I use the remote and the touchpad?

  Hello

  Touch screen and remote control cannot work side by side. Once the touch screen is connected, it takes full control of the on-screen display, allowing no changes from the remote control. This is expected behavior.

  Hope that answers your question.

  Thank you

  Saint André
  Telepresence solutions group

• a PC can not the desktop remotely to a server by using the service account

  The scenario, I have:

  A Windows 7 Enterprise SP1 64 bit pc, lets call it PC1.

  A Windows Server 2008 R2 Enterprise SP1, lets call him Server1.

  A service account, lets call him Service1.

  -PC1 on ad domain network, can ping Server1 by IP and vice versa. PC1 on the same subnet as the other PC.

  -Server1 on a working group, has same DNS as PC1

  -Service1 is used for all the desktop remotely to Server1.

  The problem:

  All the PC's on the field are able to Server1 using Service1 remote desktop, but unable to PC1. (This displays Server1 accepts the remote desktop connection, and credential Service1 works very well)

  Tested PC1 can desktop remotely for all other servers on the network. (cela poster services the PC1 Remote Desktop works fine)

  Error:

  This computer cannot connect to the remote computer.

  Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.

  Any idea?

  Server are better to ask questions on the Technet site.

  http://social.technet.Microsoft.com/forums/en-us/categories/