a PC can not the desktop remotely to a server by using the service account

Similar Questions

• Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

  Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

  In the Task Manager, click on "File" and select "new task (run).

  Type explorer.exe, and then press the ENTER key.

  If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

• I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why?

  I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why? Apparently my camera 'new' picture does not "see" the flash, must now the transmitter? Is there a Flash that work wirelessly with my canon 6 d?

  All remote flashes need a way to communicate with the camera.  They can be wired or wireless.  The wireless system can be optical or radio.

  The key is that there is nothing built in the 6 d to control a flash... If you need something to do this work.

  The 430EX II can be triggered via optical signal as a remote "slave" flash (430EX II cannot function as a mode of 'master' (aka 'Commander').)

  The method of Cannon to control the 430EX II is to use either:

  (a) a "Speedlite ST - E2 transmitter.

  (b) speedlite another able to work in "master" mode (and there's a long list... the 600EX / 600EX-RT, the 580EX II, and curiously the 90EX is actually able to perform a 'master').

  I recommend either the 600EX-RT (which would be the basis for additional units 600EX-RT in the future that would give you radio trigger) or find a 580EX II.  I probably spend on the 90EX and promote a ST - E2 if desired subject is a way to trigger the remote flash and don't actually want a flash.  The 90EX is not very powerful, so it is not particularly suitable as a stand-alone flash, unless you use it simply as a "fill" flash for close subjects.)

  There are also many 3rd party triggers, but the vast majority of them won't let you not use E - TTL (they would be "manual" only) and the units which support E - TTL will be too expensive to buy just a high flash range running as Commander.

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• In recent weeks, I can not connect to my HP MediaSmart Server.

  In recent weeks, I can not connect to my HP MediaSmart Server.  My network do not see even if it is connected to my router.  Everything I tried was no chance.   At this point, I just want to get in there, so I can recover my files.   Any help is very appreciated.

  original title: HP MediaSmart Server.

  Hello

  I recommend you post the question in the Windows Home Server forum.

  http://social.Microsoft.com/forums/SK-SK/category/WindowsHomeServer

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  What do you mean by "port number"? HTTP port (usually 8080), or listening port (normally 1521)?

  To change the name of the service, you can use (as a DBA or SYSDBA)

  SQL > alter system set service_name = '';

• Failed to add the service account to the pdf generator

  Hi guys,.

  Pourrait any assistance on the question I receive.

  I am currently working on a production server and adding a service account to the pdf generator and I get the error message: "the user account is not valid for the computer.

  I can't connect to windows with this fine account.

  Is there a group policy or and rights must be changed to fix this problem?

  Please advise,

  Thank you

  Hi Venky143,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forum. Please post your question in the Windows Server Forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  In addition, you can post your question in the ITpro forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Thank you.

• sensor to recreate the image via the service account?

  Hello, I have the following problem with a JOINT-2 (4.1.5 S211) module:

  I am able to get to the screen to login via SSH. I connect with my login and my password but the following error: cannot communicate with authenticationApp (getUserAccountConfig). Please contact your system administrator.

  You want to run cidDump? [No]: _

  I can, however, enter into the sensor via the service account. I tried to stop and restart the CID as well as restart the sensor, unfortunately without success. At this point, the only thing I know to do is run partition recovery for reimage the sensor - is it possible to do it on the service account?

  -Patrick

  Hello

  You use the set of user name and password? What happened to the sensor through telnet and HTTPS access? Are you facing the same problem with above all?

  If the password is correct then the engine of Authantication could have been corrupted.

  You can rebuild image of the sensor through the service account.

  Start the JOINT-2 to the maintenance partition:

  cat6k # hw - module module reset cf:1 module_number

  Session in the partition maintenance CLI:

  processor cat6k # session slot slot_number 1

  Connect to the partition maintenance CLI:

  Login: guest

  Password: cisco

  If it is possible, then you can recreate the application partition image:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/hwguide/hwclipr.htm#wp91045

  After you re-create the image restart us the JOINT-2 for the application partition:

  cat6k # hw - module module reset hdd:1 module_number

  Check that the JOINT-2 is online and that the version of the software is correct and that the status is ok:

  cat6k # see the module_number module

  Connect to the JOINT-2 application partition:

  processor cat6k # session slot slot_number 1

  You have to retrieve your backup configuration.

  Note the post if it helps.

  Ashish

• The unit 3.1 (3) change of password for the Service account

  Hi all

  I am aware of the link and procedure on how to change the password of the service account of the unit 3.1 X here: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml#topic2

  My question is this. I have 5 unity servers that use this service account in any area, which includes Europe and the United States. If I change the password in AD all services will continue to work with the old password as long as they have not restarted with the old password? I know I need to change the password for each service that uses the account and then restart the unit, but since AD taking so long to reply, I was hoping to change the password of the account one day and then the next day or even longer when I have planned for my failure, I can then change the password for the services on each server and then restart the unit and make sure that replication is complete and the services start again with the new password.

  I think as long as I do not have to restart services can I change the password of the service account in AD a day or two before I schedule my outage can I change the password for all services, and then restart the unit. I know that I can force replication, but it would be nice to be able to change it in advance as long as it is not flexible, whatever it is. Even force the replication takes a lot of time in our environment and I want to be sure, can I change well in advance without having a negative impact.

  Thanks for your time!

  Keith

  If you change a password for a domain account, it should respond immediately through the Organization as AD treats this with the highest coastal.

• How to change the password for the service account for a specific application?

  PC is used by some employees at the workplace.

  A user has installed an application on this PC, all users can use this application with user password this person who has installed.

  After that the user who has installed an application has changed the password, the Application is locked.

  I heard that need to change the password of the service account for a specific application.

  How to do?

  Advice me please.

  Thank you

  It depends on the application itself. You could check the FAQ of the application or to re - install the application and ensure that it is available for all users of this machine.

• Schedule a task by using the service account

  To schedule tasks by using the service account and he could be executed in more than one PC. Please suggest and provide some example or screenshot.

  Hi Ravikumar,
   
  Thanks for posting your question in the Microsoft Community Forum.
   
  Based on the information, you find out to schedule tasks by using the service account and to run in multiple PCs.
  It would be useful that you can answer the question to help you further.
  Your system is connected to a domain?
   
  If your system is connected to the domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows 7
  Let us know if you need help with Windows related issues. We will be happy to help you.

• Change the Service account of vCenter

  Hi all

  I was wondering how easy it is and what it is to change the service account of vCenter Local system as a domain account?

  Thank you

  Chris.

  TallChris wrote:

  Hi all

  I was wondering how easy it is and what it is to change the service account of vCenter Local system as a domain account?

  Thank you

  Chris.

  Hi please follow the steps below

  1. Click Start > run, type services.msc and press ENTER.
  2. Double-click the VMware VirtualCenter Server Service.
  3. Click the log .
  4. Select this account, type the name of the account in the nom_domaine\nom_compte format, or click Browse and find the right account.
  5. Enter the password for the account in the password and Verify password fields.
  6. Click OK.
  7. Start the service.

  Yours,

  Satya

• Can connect with desktop remotely all directions except via internet Windows XP to Windows 7

  I have a new computer with Windows 7 Pro to work I need with desktop remote access so that I can work from home and be with the family.  For years I used remote desktop connection from home using Win XP SP3 to my Win XP Pro SP3 computer at work.  I am able to connect my old WinXP computer work on my new Win 7 computer (locally).  I can connect from home computer Win XP Win XP computer via internet (DSL) to work.  I can connect from Windows 7 computer to work at Windows XP home computer over the internet (DSL).

  So, I have Setup port forwarding or modems DSL correctly, the IP addresses are correct, consistent remote desktop clients. Firewall exceptions are configured correctly.

  What is different.  The new computer with Windows 7 Pro has McAfee Internet Security all others running EAST of Kaspersky.  Win 7 computer is new.  Since I am on various possibilities of connections, changed listening port of 3389 on some computers, including the new Win7 computer (this should not be a problem that I'm able to connect locally).

  Disable the firewall (software Anti-anti-virus/IS) on both computers does not help. In any case, I can go to WinXP Pro to work on Win 7 computer to work locally.

  My thought is that there may some security policies, or maybe a protocol problem which is different with the new Windows 7 computer that does not have a connection outside the local network (via a public network).

  I also tried to set up a VPN connection integrated Microsoft: forwarded port 1723, the GRE protocol allowed to the DSL modem.  Tried all different scenarios between Win XP Home and Win 7 computer at work and cannot configure the VPN connection. I get error 678: the remote computer did not respond.

  I spent hundreds of discussions help/knowledge base and discussion review.  I have seen or followed all the instructions on the various sites of tech Web to configure VPN connections and Remote Desktop connections.

  Does anyone have an idea as to what could be the solution here?

  Hello

  Please post your request in the Microsoft TechNet forum, where experts on this platform can help you with the problem.

  Please see the link that will take you on the TechNet forums below:
   
  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows Photo Gallery can not open desktop image files

  When I double click on an image file on the desktop, nothing happens.  When I right-click and choose Preview, it does nothing. also, if I choose open with: Windows Photo Gallery, nothing.

  I can add pictures in a folder, start Windows Photo Gallery and view them.

  I have never changed the default Photo Viewer, it's still the Windows Photo Viewer.

  Hi m WALID,
   
  Step 1: Try these steps and check the result.
  a. Windows Photo Gallery closed.
  b. Click Start, type %userprofile%\AppData\Local\Microsoft\Windows Photo Gallery in the search box and press ENTER.
  c. right-click Pictures.pd4 or Pictures.pd5, and then select Rename.
  d. change the name of the file for example OLD_Pictures.pd4 or OLD_Pictures.pd5
  e. open image files and check the result.
   
  Note: Photo Gallery Windows recreates the database based on the information stored in your media files and metadata. All the metadata that are not rewritten on a media file will be lost. For example, the metadata might be lost because a media file was locked or read-only.
  
  Step 2: If the problem persists, scan system file checker (SFC) to find and difficulty of the missing or corrupt system files
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully and check the result.
  c. check to see if the problem persists.
   
  Step 3: If the problem continues, check if you are able to view the image files by disabling all non-Microsoft programs to find if one of them is causing the issue
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.
  
   
  Visit our Microsoft answers feedback Forum and let us know what you think.