The cd/dvd drive replacement

I bought a new light scribe cd/dvd drive to replace the original one in my Dell E510 deminsion and I can't get the computer to recognize the drive... I have a drive not recognized 3 any ideas on what I should do.

Tags: Dell Drives

Similar Questions

Re: Satellite A100-692 - how to replace the CD/DVD drive?

Hello

the device DVD/combined my A100-692 is damaged and I want to replace it.
I found no still no guide how to replace the unit.

Is there something available?

Thanks in advance!

Hello!

AFAIK, you must remove the keyboard first, before you can replace the CD/DVD drive. Remove the screws on the lower side, and then you can push the disc if you have replaced the keyboard.
It seems to be a bit tricky

Maybe you should ask a technician for laptop to help. They can replace the CD/DVD drive for you.

Good bye

Can satellite A100-097 - I replace the cd - dvd drive

Hello

The cd-burner in my Satellite A100-097 drive begins to age, burns can sometimes fail, sometimes cannot even read simple audio cds.

Can someone tell me if I can replace it with a new and where to find it, finally?

Thank you
Andrea

Hello

Yes, you can replace the CD/DVD drive with a new one.
But be aware that not all of the sides are compatible due to different master/slave/c-salt settings

Manual of use you should find some details about compatible readers and supported
Check it out
If you have no user manual then go to the Toshiba European page to download.

In addition, you can buy a player of an ASP supported in your country
The guys would be able to order it at Toshiba if necessary.

How to access the cd/dvd drive to replace?

I need to replace the cd/dvd drive and cannot find a way to access it after unscrewing the back - all of the panel does not seem to take off. Thank you!

Here is your manual:

Manual

Page 58

CD/DVD drive replacement

I need to replace the CD/DVD drive in my 300-1025 Touchsmart and I realize that also miss me the cage that attaches to it. I don't seem able to find where to get a replacement. If anyone can help me find where I can buy the cage he attaches to them, I would be very grateful. Thank you!

Hello

Please consult the following list (down Cage). You can buy in the store part or use part # to search on the Net such as eBay:

http://PartSurfer.HP.com/search.aspx?SearchText=NY537AA

Kind regards.

How can I get the utility auditor of system files (SFC) in Windows XP to search for the source files on a CD in a CD/DVD EXTERNAL drive instead of the CD/DVD drive internal Windows?

I use a Dell Dimension E310 PC running Windows XP Media Center Edition. The CD/DVD drive has stopped recognizing CD long ago. (He still recognizes DVD but not CD). I use an external drive to CD/DVD of Asus. I keep getting messages that Windows need to replace versions unrecognized some Windows file and asks me to insert my source CD into the CD/DVD drive. I checked the MS Knowledge Base and got instructions on how to use the utility (SFC) System File Checker to replace the unrecognized Windows files. I started the process and inserted the source of CD files (recovery CD provided by Dell with the PC when I bought it) in the drive of external CD/DVD, but the SFC would not recognize it it. He just kept asking me to insert the CD of source files in the CD/DVD drive. So I have to find a way to get the SFC utility to find files in the external CD/DVD drive source - or I have to take the PC to the Geek Squad, buy a new CD/DVD drive and get them to install it. Would appreciate any help you can provide.

GO to start > run > regedit
Access
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup

SourcePath = X:

Where X: is the drive letter of your CD/DVD

media in the CD/DVD drive is not readable HL-DT-ST DVD-RAM-GSA-H55L help!

How can I fix it?

Step 1: Please do all the below even if you did before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps and happy holidays!

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

My cd/dvd drive has disappeared. All trying to solve the problems of the code 19 appears. How can I get the cd/dvd drive F?

my cd/dvd drive has stopped working. He said after a repair code 19. How to restore the drive?

Hello

19 code means there is a driver conflict such as two devices attempt to use the same resources.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

Hello

Detect and automatically fix problems of CD/DVD
http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

Please make all below even if you have done some before as it is often the set of operations which solves
the question.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

Hope these helps.

Rob - bicycle - Mark Twain said it is good.

The CD/DVD drive malfunction: one missing, the other does not work

My HP Pavilion dv6000 laptop running Vista, came with a CD/DVD drive that appeared as a reader of CD (e) and (f) HD DVD player, with the hard drive and windows repair partition C: and D:. There, the E: drive seemed to have disappeared, and it is the reader who would access it when I put a CD to read from. The HD player never worked to this end and of course now that I only have the "F:" drive, and it tells me to insert a disc, despite the fact that there is a disc in there. And I have no idea of what I did.

I right click on the HD drive properties and go to the Hardware tab. WDC (Buncha numbers) ATA device is listed as type of hard drives, and UTIHAX (even numbers) SCSI CdRom Device is listed as a DVD/CD-ROM drives drive (Yes, with the '). Both work properly, according to the properties of the device.

I tried to disable and re-enable the it. I tried to uninstall and allow the pilot to resettle. Nothing doin ' sofar, so I was wondering if any of you have any other ideas I could try.

I'd love to hear them! Let me know what you need.

Hello

Even if the conditions are slightly different the same cause may be at stake.

Do not forget to check with HP, their documentation online support and drivers and the HP
Forums for known issues.

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

-------------------------------------------------------------------------------------------------------

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Media in the CD/DVD drive is not readable

Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device responding drive is empty or the media format is not supported

WINDOWS VISTA HOME PREMIUM SERVICE PACK 2

RANGE OF COMPAQ PRESARIO CQ61 NOTEBOOK PC

My laptop can read the DVD, but it will not read I try to play any CD. It will be still asking to insert the disc when I.
See below the report of Mr. Microsoft Fix

I appreciate your help with this. Thank you

Problems found

Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device

Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device

The drive is empty or the media format is not supported

Not fixed

Insert the decipherable by media

Failed

Verified issues
Class filter drivers are corrupt Class filter drivers are corrupt One or more specific class filter drivers are missing/corrupted	Checked
Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device) Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device) One or more device-specific filter drivers are missing/corrupted	Checked
Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device) Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device) This device is faced with a problem that it prevents to function properly	Checked
Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device) Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device) The CD/DVD drive have been disabled in Device Manager	Checked
Drive is not assigned a drive letter Drive is not assigned a drive letter The CD/DVD drive is not accessible via a drive letter assigned	Checked

Problems found

Details of detection

Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device

Not fixed

The drive is empty or the media format is not supported

Insert the decipherable by media

Failed

Insert a CD or a DVD disc play in the selected CD/DVD drive

Verified issues

Details of detection

Class filter drivers are corrupt

Checked

One or more specific class filter drivers are missing/corrupted

Fix class filter drivers

Not work

Remove references to class filter missing/corrupt driver

6	Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device)

Checked

One or more device-specific filter drivers are missing/corrupted

Uninstall the device

Not work

Uninstall the device problem

Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device)

Checked

This device is faced with a problem that it prevents to function properly

Rescan devices

Not work

Look for changes in available devices

Uninstall the device

Not work

Assign drive letters to all the readers who have no drive letter

Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device)

Checked

The CD/DVD drive have been disabled in Device Manager

Turn on the device

Not work

The device must be activated before it can be used

Drive is not assigned a drive letter

Checked

The CD/DVD drive is not accessible via a drive letter assigned

Drive letter

Not work

Assign drive letters to all the readers who have no drive letter

Hello

Well you have studied the issues pretty well. Could be material.

You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.

A CD/DVD cleaner might help.

CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
They may be delivered, but it is generally more economical to replace the disk.

Several good info here:
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

============================================

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

The CD/DVD drive reads not my HP laptop.

My problem: I'm trying to upgrade to 64-bit on a laptop Windows 7 32-bit of Windows Vista; However, the CD/DVD drive cannot be read in my computer or Device Manager.

I already tried application Fix - It Microsoft, but to no avail.

I am not confident in working with the registry files, but if there is a simple and straightforward process to follow, I can handle.

Help, please!

Hello

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

Then run checkdisk (chkdsk).

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

==========================================================

After the foregoing:

References to Vista also apply to Windows 7.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Do step 2, you would need to know the registry entries to try then to ask the system and
Manufacturers of devices as well as checking with the Mycelial forums. Of course, check for the firm - update
Ware. If you can find reliable registry entries to try and need, we can help automate that
process once the information is known.

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

Thanks in advance.

Hi quietly,

If your CD/DVD drive doesn't work, how do you have a system restore?

Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
Check this box!

Sdatellite M100 does not recognize the CD/DVD drive in Windows XP

It is listed in the Device Manager, but with a yellow explanation mark.
No mention of this in my computer.
No icon.

I am able to open the drawer and I put several types of cd/DVD in them without any result.
The light flashes in orange on the door. The drive is listed as "Mat * advd-ram uj - 841 s-(sm)" in the bios under boot devices.

I'm trying to figure out how to remove the drive and reconnect but it seems that I have to disassemble the thing to do and hesitate without a diagram.

It is only a user guide in the downloads on this site so any help is appreciated: 0)

Oh, I also downloaded the driver from this site for the drie. Before that, I uninstalled the drive in Device Manager, but there was no change when I installed the downloaded driver.

Simply using a Ubuntu Linux live cd and it is running.
Unfortunately its going to be hard to know for sure what the problem in this way because I don't want to install ubuntu on this machine it is someone elses machine and they are far from would you like to try linux.

I'm in a live session now.
Ah ok when I go in the media folder there is no mention of the cd/dvd drive.

It is really a problem unless I can unplug physically the Mo and reconnect: 0 (Oh wait here it... is under 'cdrom' folder ' but only files with a relevance to the side by side with windows installation are mentioned... exe files, wubi etc..)

Ah ok that's beyond my experience.
Can someone give this amateur a tip?

First remove the player of ODD (CD/DVD) from the list in Device Manager.
Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

HKEY_LOCAL_MACHINE \ FAT32\ CurrentControlSet \ Control\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

Finally, you must restart the device.

Once again, windows will recognize the STRANGE

Equium A60: How to remove the CD/DVD drive

I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

Hello

I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

The cd/dvd drive replacement

Similar Questions

Maybe you are looking for