The clause in the database log file duplicate

Similar Questions

• Database log files

  Hi Experts,
  
  Can anyone tell me the location of the database log file?
  
  Thanks in advance

  Log files from database, 11g, would be in the folder called diag standing for the Dest diagnosis and is maintained by the diagnostic_dest parameter. To see where you have configured this setting to be, it would be in the Oracle default base location.

  HTH
  Aman...

• Attach a database without the corrupt log file

  Hello

  IM asking if it is possible that to fix one. MDF datafile without the. DFL

  I want that because I have a corrupt log file nd when I attach the database triggers the following error: -.

  -----------

  The log cannot be rebuilt because there were open transactions / users when the database has been arrested, no checkpoint occurred to the database, or the database was read-only. This error can occur if the transaction log file has been manually deleted or lost due to a hardware failure or the environment.

  --------------------

  I just need the data of this file that I need and I don't have the damaged log file

  I tried

  sp_attach_single_file_db "new_2009", "C:\Data\new_2009_Data.MDF".

  but the same error comes back.

  Note Please that I have no recent backup suggest to restore the database from backup

  Thank you

  One of the commands and restore types should help you, good luck...

  Restore the full backup WITH RECOVERY

  Note: as mentioned above this option is the default, but you can specify as follows.

  Command:

  RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorks.BAK '.

  WITH RECOVERY

  GO

  Recover a database that is in the State of 'restore '.

  Note: The following command will take a database that is in the State of 'restoration' and make it available to end users.

  Command:

  RESTORE DATABASE AdventureWorks WITH RECOVERY

  GO

  Restore multiple backups using WITH RECOVERY for the last backup

  Note: The first restoration uses the NORECOVERY option restores additional is possible.  The second command restores the transaction log and then brings the database online for the use of the end user.

  Command:

  RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorks.BAK '.

  WITH NORECOVERY

  GO

  RESTORE LOG AdventureWorks FROM DISK = 'C:\AdventureWorks.TRN. '

  WITH RECOVERY

  GO

  More information that you can dig up resources directly connected with SQL Server databases and the MS SQL Server database no matter what version...

  http://www.SQLServerCentral.com/forums/Topic1602448-266-1.aspx

  http://www.filerepairforum.com/Forum/Microsoft/Microsoft-AA/SQL-Server/1413-SQL-database-in-suspect-mode

  https://www.repairtoolbox.com/sqlserverrepair.html SQL Server repair Toolbox

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• The bosses like ORA - looking in the SQL log files

  Version: 11.2.0.3
  
  
  In our database of Prod, I do about 15 SQL files provided by the team of apps.
  
  After the implementation, the apps team asked if I had errors. Because I had no time to browse each log file, I just did a grep for the model

   ORA- 

  in the execution log files.
  
  

  $ grep ORA- *.log
  <nothing returned> , which means no ORA- errors).

  Later, it was discovered that several triggers are in INVALID state and errors of compilation during execution of the script. She got the rebound. When I checked the logs carefully, I could see errors like below in the log file

  SQL > CREATE OR REPLACE TRIGGER CLS_NTFY_APT_TRG
    2  AFTER INSERT ON CLS_NTFY
    3  FOR EACH ROW
    4  DECLARE message VARCHAR2(100);
    5  BEGIN
    6    IF (:new.jstat=1) THEN
    7        message:='JOB '||:new.mcode||'/'||:new.ajbnr||'/'||:new.jobnr||' inserted';
    8        DBMS_ALERT.SIGNAL('FORKMAN',message);
    9       END IF;
   10  END;
   11  /
  
  Warning: Trigger created with compilation errors.

  The apps team is annoyed with me because they raise another CR to get these compiled triggers.
  
  Question1.
  What are the patterns of errors usually you grep after running SQL files? Today, I learned that I should be looking for the ' alert' string in the log files. So, I added the following diagrams to grep in the future.

  ORA- 
  Warning 

  If you guys are looking for any other patters error, let me know.
  
  
  Question2.
  No idea why I don't have an ORA-error for the above Trigger compilation error?

  Kavanagh wrote:
  Question2.
  No idea why I don't have an ORA-error for the above Trigger compilation error?

  Because it is the way in which SQL * more reports that an error has occurred... This isn't a real message of the database itself. If you need to see the error you need to do:

  SHO ERR
  

  thereafter to show the error actually happened.

• bottleneck during the passage of the redo log files.

  Hi all
  
  I'm using Oracle 11.2.0.3.
  
  The enforcement team has indicated that they are facing slow at some point.
  
  I followed the database and I found that at some passage of redo log files (not always), I am facing a slow at the application level.
  
  I have 2 son since my database is CARS, each thread has 3 groups of multiplexed redo logs the FIU, with size of 300 MB each.
  
  Is it possible to optimize the switch of the redo log files? knowing that my database is running in ARCHIVELOG mode.
  
  Kind regards

  Hello

  Yes, Oracle recommends 1 validation by 30 calls from users or less. Of course, every database is different, so this rule cannot be taken too literally, but in your case, this rule seems to apply. In any case State, 900 undertakes seconds it looks like a very large number and the need for a high number of transactions should be questioned. You should talk to your analysts/application management/enterprise architect if warranted - that is to say if the application does in fact almost 2 000 business transactions per second.

  What about DB CPU: here is a link to a blog that I wrote on this subject, it should help to better understand this number:

  http://Savvinov.com/2012/04/06/AWR-reports-interpreting-CPU-usage/

  But briefly: DB processor isn't a real event, it is simply an indication that the sessions are on CPU (or waiting for CPU) rather than wait on i/o requests or events in the database. It is not necessarily a bad thing, because the database must perform tasks and he cannot do without loading the CPU. It may indicate a problem in two cases: when the CPU usage is close to the limit of the host (OS stats section indicates that you are very far from there) or when the CPU is a % of DB time - in the latter case, this could mean that you are making too many logical reads due to inefficient plans or analysis too. In any case, this does not apply to you, because 20 percent is not very high a number.

  Other items in the list of the top 5 deserve attention, too - gc buffer busy acquire, gc current block busy, enq: TX - line lock conflict.

  To summarize, your database under a lot of stress - whether it is the legitimate workload, and if this is the case, you may need to upgrade your hardware later. There is chance that it isn't - for example a high number of runs may indicate that rather than to bulk operations database code using PL/SQL loops, which is a big performance killer. Check "Top SQL by executions" about whether or not this is the case.

  Good luck!

  Best regards
  Nikolai

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access denied to the CBS.log file

  Hello

  I found the cbs.log file but when I tried to open it I get access denied. Found a similar question in another post, but was unable to find a solution. Running Vista Home Premium SP2 64 bit on a HP Pavillion dv9700 Windows 7 or IE8. Also tried to copy the documents as suggested in another post and ran as administrator on the command line without a bit of luck. Other simple suggestions are appreciated.

  Hello talefeather,

  Thank you for visiting the Microsoft answers community.

  Try this:

  ·          Click on Start Orb > type cmd in the search box

  ·          Right click on cmd in the results above > click on run as administrator

  ·          At the prompt, type notepad c:\windows\logs\cbs\cbs.log press entry
  

  Then follow the step in which Mick provided.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to define the name of the path and inside the MSI log file

  Is it possible to define the name of the path and inside the MSI log file, so that it should not be set from the command line.  This way just race the msi causes always a logfile in a specific path and the file name?

  Read the following article and see if it helps.  In my view, it is possible to use InstallShield, but I'm not sure.  It's just a little out of my League. http://www.flexerasoftware.com/webdocuments/PDF/msi_writing_to_the_log_file.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Writing in the FMS log file

  I want to write in the log FMS of a rule. The following code works from the script console:

  println "output from test '.

  However when I put this in the rule condition I get no output in the log of the FMS. I do something wrong or isn't it possible? Or is there a better way please let me know.

  Thank you

  Kris

  Yes, it is possible to write in the FMS log within a rule or an expression of varying severity. As long as your logic is called in the rule condition, you should see the output in the FMS log file.

  David Mendoza

  Foglight Consultant

• Delete the old log files from IDS4210

  Is it possible to delete the old files of the IDM event log? If this is not the case, what is the best way to remove them.

  Thank you

  Maged

  By default, the old log files are deleted automatically because the system fills the disk and the file age.

  You can manually "clean" by using the following procedure:

  Sign in as netrangr and cd in the/usr/nr/var directory.

  Run idsstop

  dump/usr/bin/RM-f / * errors / * iplog / * iplog/news / * iplog/dumpster / * new / * log.* erreur.*

  Run idsstart

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day

• Calculation fail with (impossible to rename the outbound log file)

  Hello

  I am running a calculation script that breaks down after running for some time. I see that the problem comes from the entity dimension that has something of 4,000 members. My calc calculation script only a subset of this dimension.   I do see messages of any detail just the message log applications which ends with failure to rename the log file, exit below.

  Impossible to rename the outbound log file [Wed Oct 21 11:25:26 2015]...

  Calculator Information message: run block - [No_Activity], [Deg - 47], [No_Location], [2870], [No_Academic], [D801200], [original], [FY15], [CAD], [F9plus3]

  Cannot rename the outbound log file

  Looks like you are running with SET MSG DETAIL, is that correct?

  Has the potential to create a lot of log entries. Just a guess but you run out of space in your/diagnostics/logs folder?

• tfactl analyze the Listener.log file?

  Hello

  We have the tfactl installed in the release: 12.1.2.1.1.

  The tfactl analyzes the listener.log in a CCR environment?

  I start a tfactl analyse - search ' / service_update/c "-from 2d-comp all but the tfactl is not a result.

  I am sure that he has "service_update" messages in the listener.log file.

  concerning

  Hello

  After the documentation review and do a few tests so I found the following:

  Check which directories are "monitored" using the command:

  tfactl printed directories

  Here, you have found also the TNS log files or structure.

  If a special directory is not a party, then add the directory with the following command:

  tfactl directory add - public - noexclusions - collectall-node

  What are the correct options please see the documentation.

  Kind regards