The CompactRIO Modules are not connected

Similar Questions

• I can connect to the internet, but sometimes the message "You are not connected to internet", then after a second or two, it connects

  Just bought new HP with Windows 8 desktop computer, and it connects to the internet through a wired connection.  However, sometimes when you try to connect, the message "you are not connected to a network rises, then it usually connects."  This message also may appear when trying to back up a new web page.

  Disabled the antivrus, no change.  Plugged a laptop using the same modem and connections with no problems at all, so there seems to be something specific with this new desktop computer.

  Any suggestions on how to stop this sporadic message appear?

  Hello Andrea,

  A large number of variables are involved when you connect to a network: cables, drivers, network adapters and routers. Some common problems are:

  • A switch to wireless network adapter is disabled

  • Airplane mode is on

  • Poorly connected or disconnected cables

  • Wireless standards do not match

  • Missing updates

  • Incorrect network connection settings

  • Damaged or incompatible drivers

  • Hardware or software problems

  Perform the steps from the link below and see if the error Stops appearing.

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-a-network

  Answer please if you have any questions.

• Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How can I reinstall Photoshop CS6 on my new computer when to enter my KEY I continually get the message "you are not connected to internet?

  I bought a new computer. I reinstalled my Photoshop CS6 leave a DVD, but when I entered the serial number I get the message "you are not connected to internet" while I was.  I have "pussy" with Naveen on customer support and after 20 minutes he told me to go to the following link and reinstall through it: http://www.adobe.com/sea/downloads/other-downloads.html

  
  

  This led to the same exact scenario only it took me over 2 hours to download CS6. I then contacted the 'Support Portal online' to ask for additional help. It was 2 days ago and I still have to be contacted and assisted with my problem. Any help or ideas out there?

  Here is what is in the file "hosts":

  127.0.0.1 localhost

  127.0.0.1 activate.adobe.com

  127.0.0.1 practivate.adobe.com

  127.0.0.1 ereg.adobe.com

  127.0.0.1 activate.wip3.adobe.com

  127.0.0.1 wip3.adobe.com

  127.0.0.1 3dns - 3.adobe.com

  127.0.0.1 3dns - 2.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  127.0.0.1 ereg.wip3.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 wwis-dubc1 - vip60.adobe.com

  127.0.0.1 activate - sjc0.adobe.com

  127.0.0.1 lm.licenses.adobe.com

  127.0.0.1 192.150.14.69

  127.0.0.1 192.150.18.101

  127.0.0.1 192.150.18.108

  127.0.0.1 192.150.22.40

  127.0.0.1 192.150.8.100

  127.0.0.1 192.150.8.118

  127.0.0.1 209-34-83 - 73.ood.opsource .net

  127.0.0.1 3dns - 1.adobe.com

  127.0.0.1 3dns - 4.adobe.com

  127.0.0.1 3dns.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 activate.wip.adobe.com

  127.0.0.1 activate.wip1.adobe.com

  127.0.0.1 activate.wip2.adobe.com

  127.0.0.1 activate.wip4.adobe.com

  127.0.0.1 adobe-dns - 1.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  127.0.0.1 adobe-dns - 4.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe.activate.com

  127.0.0.1 adobeereg.com

  127.0.0.1 crl.verisign.net

  127.0.0.1 ereg.wip.adobe.com

  127.0.0.1 ereg.wip1.adobe.com

  127.0.0.1 ereg.wip2.adobe.com

  127.0.0.1 ereg.wip3.adobe.com

  127.0.0.1 ereg.wip4.adobe.com

  127.0.0.1 hl2rcv.adobe.com

  127.0.0.1 ood.opsource.net

  127.0.0.1 practivate.adobe.ipp

  127.0.0.1 practivate.adobe.newoa

  127.0.0.1 practivate.adobe.ntp

  127.0.0.1 tss-geotrust - crl.thawte.com

  127.0.0.1 wip.adobe.com

  127.0.0.1 wip1.adobe.com

  127.0.0.1 wip2.adobe.com

  127.0.0.1 wip3.adobe.com

  127.0.0.1 wip4.adobe.com

• How can I fix the libraries that are not connect?

  I have improved my CC ti plans to include stock BUT libraries that I create in Apps doesn't NOT appear in interface stock or visa versa which kind of denies one of the key features. Does anyone know how to fix this?

  Hi Lee,.

  First of all, make sure that you are connected with the same Adobe ID on CC apps and Web Adobe Stock site.

  In addition, make sure you have CC desktop application running which is responsible for the synchronization of libraries CC.

  Let me know how it goes.

  ~ David

• How to detect if the cRIO modules are connected

  I have a FPGA code that streams of data a 9219 and 9239 module. I want to disable this code if the modules are not connected. I tried looking for the values 0 to the Module ID and serial number, but no one who seems to work. What method or property questions in LVFPGA to see if the module is connected?

  Check an error output on the node of FPGA IO of the particular module. If I/O is not existed, it will give you an error.

• Disappeared from the toolbar URL, and modules are not coming back.

  Hi people. Once more Firefox drives me crazy, I woke up this morning, turned on the old computer, Firefox has started, and I have no URL bar. I tried to restore it, but no luck. Been looking for the Firefox forums for a few hours, found similar questions, but... .no cigar. I have the version 36.0.4 of Firefox. Can someone please explain how he disappeared and how to get it back?

  I uninstalled FF, entirely. And re-installed. URL bar still to go. Also, I have connected to my SYNC, but my modules are not coming back.

  I would appreciate your help.

  You still have the Navigation bar visible with other buttons on the toolbar and tab bar?

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Can not pass 9.3 - get 'you are not connected to the Internet.

  I upgraded my iPhone 6 to 9.3 an hour ago, but now when trying to update my iPhone 5s I get something like "not possible to check the upgrade... «You are not connected to the Internet more» And when you search for updates on my iPad Air it says I already have the last 9.2.1. Apple has just removed 9.3?

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

  Original title: Encarta Dictionary (not searched)

  Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Error: "Setup cannot continue because you are not connected to the internet or the server is unavailable" with install LifeCam

  Original title: Microsoft LifeCam VX-3000 installation problems

  On the insertion of the CD, I get an error message that says:

  "Setup cannot continue because you are not connected to the internet or the server is unavailable.  Connect you to the internet and run the SETUP again.  During the installation process, accept all safety messages or a firewall. »

  I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running.    (Windows xp / laptop Toshiba - all system bus met...)     Thanks for any help!

  Hi kb11a,

  The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.

  Resolve the error "Setup cannot continue" when you install the LifeCam software
  http://support.Microsoft.com/kb/973297

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MAC addresses of all my network connection cards shown in the result of 'IPconfig', although respectable adapters are not connected

  Hello

  While I'm connected only using a wired connection to a router and not wireless, when I typed "IPconfig/all", I saw the MAC addresses are listed for all "

  

  However, when visiting the 'http://192.168.1.1/' router server, I found that the MAC address of the LAN adapter I connected to appears only.

  

  Hello

   
  Thanks for your post about Microsoft Community.
   
  To answer your question, I would like to inform you that any wireless card installed on the computer will show MAC address, even if the wireless adapter is not connected to the network. It by default provides the MAC address of any device attached or installed on the computer network.
   
  Hope the helps of information. Please come back incase of other issues.

• Sync of DM of blackBerry Smartphones 'are not connected to the internet.

  I have the BB Curve 8330. I HAD DM 4.3. I bought the new computer, with Windows 7, and I downloaded the latest version of the DM. Now the message says that you are not connected to the internet. I did a lot of research today, and I do not understand much about the proxies. The only thing I see is that I listed port 80, but I see no other. I don't know if I need these two ports, and if I do, I do not understand how to find the address and add the other port. I know as little about proxies that I don't even know if I am this wording of the questions correctly! Sorry! I hope someone can help without a really complicated solution!

  Sorry that I was not back to meet and finalize this - had some seedlings to make! Finally got between this rain! I digress... Well had a few other issues with my new computer, HP have called and got help from them - couldn't even send and receive emails more. I'm embarrassed to say that the problem with my timing and electronic mail was Norton Antivirus! I had to uninstall it - that you can't even do it right on your computer, you must go to their website and get a special tool to uninstall it and when it was all finished, my e-mail has started working again and so did my syncing. I can't believe that a program like this can cause so much havoc. I know there are a lot of threads that say to deal with your antivirus, but there was a trial version on my new computer that I had not subscribed too, and even the trial were exhausted. I had checked all my settings on anti-virus, but it didn't matter. I had to uninstall all.  Thanks for your help anyway. You always learn a lot that you go when you run into problems. My own Kaspersky program is now installed, my BB is in sync, work e-mail, and seeding is finished - everything is good!

• Windows 7 PCs are not connected to the closest access point

  Windows 7 PCs are not connected to the nearest access point.  Any ideas?

  For example:

  We have AP 1 and 2 of the AP for exaple.  They have the same SSID.  AP 2 is further with a bad signal.  AP 1 is closest with an excellent signal.  Why my laptop does not connect to the AP 1?

  You MUST use the same SSID.  I think that you misread my post.

  And Yes, a channel problem is that what I have proposed.  You can try to configure access points using the 3 discrete channels (1, 6 and 11) to minimize any overlapping units to the same channel coverage.
  At least this is the traditional way, we do it, although the automatic selection increases common and 11n 40 Mhz channels (if defined in this way) are also in.