Satellite A100 - 237 (PSAA9E) - unable to install the ATI driver

Similar Questions

• Satellite A100 - 237 (PSAA9): I want to install the disk HARD SATA 3 Gbit/s

  Hi guys,.

  I have a laptop satellite A100 - 237 (PSAA9). I plan to replace the hard drive of 160 GB Momentus 7200.2 (SATA 3 Gb/s). My problem is that I can't find any information if my system will take in charge of SATA 3 Gb/s interface.

  Any help/information is much appreciated.
  Thank you...

  Hello

  I found the info on your laptop HARD drive interface is Serial ATA Rev. 1. 0a.

  Hope this info helps.

• Satellite A100-237 / PSAA9 - how to enable AHCI (SATA Native mode)?

  Hello

  I have the Satellite A100 - 237 (PSAA9) and I would like to activate the AHCI (SATA Native mode). But in the BIOS there is no settings as AHCI or SATA mode.

  Is it possible to enable it in any other way (hidden fixing, utility sw)? Or only new special BIOS for this update (I have the latest 5.90) can solve this problem?

  Thank you for the answers.

  No response for the last 5 days. Of course, there is no special hidden parameter or BIOS. ;)

  As far as I know that there is no hidden settings and also no special BIOS. If something like that exists perhaps for technicians and non-public use.

• Satellite A100 - 237 (PSAA9E) - can I improve it with a new 320 GB HARD drive?

  Hello!

  I want to switch the hard disk of my Satellite A100-237. It is equipped with 80 GB Fujitsu, 5200 rpm, SATA. I want to install a new one - 320 GB, 7200 rpm, SATA. But I don't know is it supported.

  I tried to find information about the possibilities for this upgrade, I could not find anything.

  Thank you in advance!

  > I want to upgrade the hard drive of my Satellite A100-237. It is equipped with 80 GB Fujitsu, 5200 rpm, SATA. I want to install a new one - 320 GB, 7200 rpm, SATA. But I don't know is it supported

  Don't worry, buddy... I don't see any serious reason why would be supported not the 320 GB SATA HARD drive.
  The SATA controller must handle the tough without major problems.

  It is important that you use a HARD SATA 2.5 ". The size and speed of the HARD drive should not affect compatibility.

  See you soon

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• Satellite A100 - 906 (PSAA9E) how to enable the ahci?

  How to enable ahci on this laptop.
  Debian Lenny

  * lspci: *.
  + 00:1F.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 family) SATA IDE Controller (rev 02) (prog-if 80 [Master]) +.
  + Subsystem "": Toshiba America information systems Device ff10 +.
  + Control: I/o Mem - BusMaster + SpecCycle-MemWINV-VGASnoop-ParErr-Stepping-SERR-FastB2B-DisINTx-+
  + Status: Cap + 66 MHz + UDF - FastB2B + ParErr - DEVSEL = medium > TAbort - < TAbort - < MAbort > - SERR - < PERR-INTx-+
  + Latency: 0 +.
  + Interruption: axis B routed to IRQ 19 +.
  + Region 0: Ports i/o to 01f0 [size = 8] +.
  + Region 1: Ports i/o 03f4 [size = 1] +.
  + Region 2: Ports i/o to 0170 [size = 8] +.
  + Zone 3: Ports i/o to 0374 [size = 1] +.
  + Region 4: Ports i/o to b 18-0 [size = 16] +.
  + Features: [70] power management version 2 +.
  + Flags: PMEClk - DSI-D1-D2-AuxCurrent = 0mA SME (D0, D1 - D2-, + D3hot, D3cold-) +.
  + Status: SMB-Enable-DSel D0 = 0 = 0 SME DScale-+.
  + Kernel driver used: ata_piix +.
  + Kernel modules: ide-pci-generic, ata_piix, ata_generic +.

  * cat/var/log/dmesg | grep NCQ: *.
  + ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) +.

  In the BIOS there is no parameter 'AHCI' or 'Native Mode '.

  Who is to blame and what to do, gentlemen?

  Hello

  The AHCI is enabled if there is no option in the BIOS.
  The controller AHCI (SATA) HARD drive need a driver SATA to install an OS system on the HARD drive.

  I put t know what it takes to Linux but on Windows operating system, you must install the SATA driver, which is part of the Intel storage Manger.

• Satellite Pro L500D - I can not install the ATI from Toshiba page display driver

  I reinstalled Windows 7 Home Premium 64-bit.
  No, I have the problem, I can not install the Ati (HD 4100), downloaded displaydriver from Toshiba for my Notebookmodel.

  > Now, I installed the displaydriver of the model Satellite A500d.
  .and? Doing a job?

• Of VMware Remote Console Plug-in Setup error: "unable to install the hcmon driver."

  Hi all

  I try to install the VMware Remote Console Plug-in for my browser of 32-bit Internet Explorer 11, and I get an error message during installation: "Unable to install the driver of hcmon."

  I have Windows 7 64 bit with .NET installed 4.5.5. Anything installed in my device manager, there is no hcmon.

  I use an x 86 install files to VRMC (VMware-vmrc-win32 - x 86 .exe), but I guess that this 32-bit version is what I want because I use THE 32-bit? Or is that what I want 64-bit for my OS?

  I've seen some posts related to this issue, but all my registry keys seem to be set correctly and my .NET is of course more recent than the version 3.5 SP1, but I hope it's OK.

  Also, I got an error on the USB in my Windows logs Arbitration Service, but following the steps described here, and retry the installation also failed with the same error 'hcmon' described above:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2043656

  Any ideas on what might occur, or other things I can try?

  Check if these KBs contributes to:

  http://KB.VMware.com/kb/2053281

  http://KB.VMware.com/kb/2006486

• Satellite A300D-11 t (PSAK0E) cannot install the video driver

  Hello!

  I can't find a video driver for my laptop (Win XP). Unfortunately I lost a CD I got with it. The drivers I found on the official website of Toshiba didn't work - display-20090925081024 or display-20071214163138.
  A user of the forum USA Toshiba (cee_64) advised me to install a driver of motherboard chipset, but I could not install a driver because the appropriate web page (http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK) says that, for the following parameters: short model No. = PSAK0E, Type of driver = "Chip Set Utility", country = all language = all , he could not provide any driver: "Sorry we could not find the drivers matching your search criteria", so I assumed that simply (and apparently unjustly) I don't have the drivers for my motherboard. A few other drivers (its LAN, WLAN,) are provided in the section of the conductors of the web page and I have successfully installed.

  Can someone help me? Please, I beg you! :-) For now, I use 1024 x 768 mode only... :-(

  Best regards, W.P.

  And what happen when you try to install THE display driver?

• Satellite L300-01:00 PSLBGE - cannot install the graphics driver

  Hello everyone.

  I have a big problem with my laptop video driver.
  Yesterday, I started my windows and put Windows Vista on it.
  I got all the drivers from the toshiba site but ran into a problem with the graphics driver.

  When get it Setup starts and them it gives me an error "this computer does not meet the minimum requirements for installing the software. The Setup will exit. I must say that before the start, I also got Vista and it worked.

  So can you please help me because I don't know what to do to...
  I tried all the possibilities

  Thank you very much

  Teodora

  Hello

  You can try to install the graphics driver in Device Manager.
  Go to the Device Manager, choose graphics card, click on update driver, then point to the (ini files) graphics driver files stored on the HARD disk and complete the installation

  Try this usually it should help

• I'm unable to install the printer driver for HP OfficeJet G55xi

  I am trying to install the printer driver for HP OfficeJet G55xi.

  When I went to the HP site, it said to install Windows 7 operating system printer driver, by plugging the printer on my Windows 7 computer using a USB cable.  I did, but it was not installed.

  I also need to install the HP Director software.

  I had a computer technician to connect remotely to my computer to install the printer.  He had to install additional tools that are available on the same site where I tried to install the printer driver.  I don't know how he did, but I watched it.  Anyway, he managed to install additional tools, which resulted in the printer being installed correctly.

  It's a pity that the site where I download the printer driver does not provide adequate instructions for how to do this.  I guess the solution is hiring a computer technician to do it for you.

• Satellite A100-237 (PSAA9) crashes after update BIOS 5.10

  I have a psaa9 A100-237
  I recorded my book and went in the updates section
  There was an update of the available BIOS, I had version 2 before I updated to 5.10.

  Now everything has gone well, but the laptop is restarted, it blocks every time on the start screen where the toshiba logo is displayed.
  I can't log into BIOS, boot from the CD or anything.
  When I press ESC black screen just showing bios version 5.10 memory pass and things, also written there is error TRM (TPM?) or not found.

  I used the method of updating the bios windows and followed all the directions, wts the problem?

  Hello

  May I ask why you updated the BIOS?
  You are 100% sure that you have updated the BIOS with the correct procedure and used the good BIOS?
  Have you read the Description of the Toshiba BIOS update before continuing?

  As far as I know the BIOS 5.1 has been released to use and install Vista on this laptop!
  Hmm, maybe something goes wrong during the update procedure and, therefore, the laptop cannot load and start correctly.

• Satellite A100-237: unknown device after installing Vista

  Hi all

  Just installed vista on my A100-237... After doing the upgrade of the BIOS and the installation of the "unknown device" Value Pack, with the location "on system compatible ACPI Microsoft" appeared in my device manager, any ideas on how to address this issue?

  Thanks in advance!

  Hello

  Could you please check if you can see the 'Batteries' entry under ' computer in Device Manager?
  As far as I know that the entrance of batteries should have a "Microsoft SMART Battery" & "Microsoft SMART Battery subsystem.

  If there is an unknown device, this might have something to do with Microsoft ACPI Compliant Embedded Controller.
  In this case it seems that you need a driver for MS SMART SMART Battery & MS battery subsystem.

  pleasae also check this thread;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14575

• Satellite C670D - cannot install the ATI driver on Win7 installed costs

  I have a C670D and cams with Win7 Home Prem
  I have Win7 Enterprise edition and installed.

  It looks good, but the dosn´t graphics work. I have try´d the pilot in the Support section, but they didn t work.
  The site of ATI theres no driver for it.

  Maybe I just need a driver of the APU, but I can't find anything.
  Maybe someone here can help.

  Hello

  What Satellite C670D-xxx you have exactly?
  Do you have an error during the installation of the driver?
  Have you installed a Win 7 Enterprise 32 bit OS?
  The European driver Toshiba page provides only a display driver ATI for Win 7 64 bit system.

  More information would be really appreciated!

• Satellite A100-451 - a few questions on the HARD drive, speakers

  I hope someone can help with these that I could not help on the information line.

  How fast is the hard drive on this laptop? He said SMART 160 GB, but does not specify a speed, although I'm guessing its 5400 RPM.

  Are the Harmon Kardon speakers? The specs say Toshiba stereo, and even on the Comet, he said Harmon Kardon. Here is a good bass-wise?
  Looks like there is no bluetooth, I find a little surprise.

  Finally, the only place wherever I can find it for sale is the comet... I was wondering it anyone has also saw that I had some dodgy experiences with them.

  See you soon
  Matt

  Hello

  I found some info that the rotation of the HARD drive is 4200 RPM. I'm not sure 100% on speakers but usually if laptop a harman/kardon speakers it is not in the specification but for A100-451, it is not the case. This info, you can get the garage directly.

  BT is not available, and it shouldn't surprise you because most of the A100 models are supplied without BT module. You can use any time key USB BT. IT is simple to use and really cheap.