the computer off for a missed month several updates

Similar Questions

• XP installation update every time I turn the computer off.

  I don't know what happens, whenever I turned off my PC (running Windows XP Home Edition, Version 2002, SP3) for the last week or so, it is said that it will install an update, if I disable normally.  I mean, click the button, it installs and turns off, and then the next time that I turn it off, it happens again.  1 update every time, I let it run all along, just as I always before.

  Teepet,

  Please download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now run MicrosoftFixit50202.msi and choose it's default mode.

  When the Fixit has finished, open automatic updates in Control Panel. Do not restart the system, but even if you have been invited to.
  Set the update option for " download updates for me, but let me choose when to install them ." Click on apply, then OK.
  Close the automatic updates.
  Reboot the system now.

  Doing the above will force the automatic updates to download all the updates that are missing.
  When the Update icon, click it.
  Please note that updates are available and their numbers of KB.
  Close the window.
  For now, do installation No updates until what you have posted to those to whom they are.

  Expert MowGreen Windows IT Pro - consumer safety

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• roar of hard disk and the computer freezes for a few seconds

  My hard drive makes a sound whirring for a few weeks now and when I type in emails or messages like this, the computer freezes for a few seconds. Any ideas how to fix this?

  A desktop computer. Your problem could be overheating.

  You must remove the side panel right and remove dirt dust bunnies fans. Also, make sure that all the fans are working. Safety switch the computer off and pull the power cable before removing the side panel. You can then move the computer backon and check that the fans are working.

  Then, turn off the computer and some time for that cool. It is best to use a wrist band, which you set on the casing of the computer to you the earth before touching anything inside the envelope. You can buy one in a store of computer accessories. Static electricity can damage a motherboard if you don't take precautions.

  Then, you use a small brush to remove the sheep of dust around the fan on the processor. I used an electric razor, cleaning brush. I use an Air blower to clean the power supply fan. An air Duster is also useful fopr cleaning keyboards.

  Removal of the dust bunnies should reduce the noise that makes your computer. It can also reduce overheating, which can lead to errors of Blue Screen of Death.

  Another way to check the hard disk to see if it is overheating is to use HD Tune 2.55 (free):
  http://www.hdtune.com/download.html

  You have to scroll the page to see the freeware version.

• How can I make the computer asks for a password before downloading a program?

  How can I make the computer asks for a password before downloading a program?

  Hello

  You can configure the computer to request the password when you install any program using the User Account Control (UAC) on the computer. But you will not be able to make windows to ask password when you try to download and program.

  You can check the link next on change control settings of user account for more information.

  http://Windows.Microsoft.com/en-us/Windows-Vista/your-permission-please-understanding-user-account-control-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-change-the-behavior-of-the-user-account-control-message

  You can use any program of third-party download manager in which you can set a password when you download any file/program on the computer. You can use your favorite search engine to find any Download Manager for the browser software.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• LR 5 (student - teachers edition I bought a disc about six months ago).  I have installed all updates of 5.7.1, seeks advice if I should go ahead and get the Adobe photography for 9.99/month Plan so I can also access to Photoshop.  Who is right

  I have 5 LR (student - teachers edition I bought a disc about six months ago).  I have installed all updates of 5.7.1, seeks advice if I should go ahead and get the Adobe photography for 9.99/month Plan so I can also access to Photoshop.  Is it just a waste of my previous dollars on the previous product?

  Hello

  I suggest you go ahead with the plan of photography it will give you access to the latest versions of applications (PS + LR) with 2 GB of cloud storage.

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud

  Hope that helps!

  Kind regards

  Sheena

• In the course of my recent upload Lightroom 5 on my Macbook I bought recently with the serial number of the disk that I bought the year last for my Windows PC (an update of Lightroom 4) of the license.  I have an error message "you entered the serial numb

  In the course of my recent upload Lightroom 5 on my Macbook I bought recently with the serial number of the disk that I bought the year last for my Windows PC (an update of Lightroom 4) of the license.  You receive an error "the serial number you entered is invalid."  Why does CC not recognize this as a serial number valid?

  Soyouca how did you install Photoshop Lightroom?  Please uninstall the current installation by using the uninstall program located in Applications/Utilities/Adobe Installers.

  Once Photoshop Lightroom is deleted please download a new copy of the installation files of Adobe - Lightroom: for Macintosh.  The update contains the full installer then please download the latest version of Photoshop Lightroom 5.

  You may be asked to enter your serial number for Photoshop Lightroom 4.  You can find information on how to locate the serial numbers under your account to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

• Script to find the virtual computer off for more than 7 days

  Guys,

  I need a bit help I'm looking for a script that finds all the VMs who have been turned off for more than 7 days.  I would like also the names of those VM and how many days they have been turned off for a worksheet excel output.

  Thanks in advance.

  Sorry, my mistake.

  The correct script is now attached to the previous response

• Setting for "allow device to wake the computer" gray for the USB root hubs

  So I wanted to change the setting for "Allow the computer to turn off this device to save power" in Windows 7 Device Manager. I accidentally also selected "allow this device to wake the computer".

  I want to change the setting back to "Allow this device wake the computer", but it is grayed out.
  Anyone know where I can switch this back in the registry?

  Hi Cody,

  Thanks for the reply.

  I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.

  Reference:
  Information about the configuration of a network card power management
  http://support.Microsoft.com/kb/2740020

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• XW4400 does not start. Occurred after the power to the system off for 2 weeks. Now, does not start. Help!

  As noted above in the subject... exploded with power for about 2 weeks supply.  On his return the

  system won't start.  It keeps going in a circle.

  Here's what happens;
  

  (1) it goes to the window HP

  2) immediately goes to a window stating "windows did not start properly. A recent hardware or software change might be the cause. "Then on and other causes.  Well, none of them took place.

  To the bottom of the window there's several options to try.  Safe mode, Safe Mode Networking, last known successful... and start normally.  All the options have been tried several times.  To 30 sec timer waiting for your choice.  NONE OF THE OPTIONS WORK.  Cannot start in any mode.  After all of the selections it shows;

  (3) a flash of the microsoft windows screen and then we go back to number 1.

  Info on the system;

  XW4400

  • Manufacturer part number: ET115AV-CTO
  • Manufacturer: HP
  • Product description: ET115AV-CTO HP xw4400 Workstation computer desk
  • Product type: desktop
  • Form factor: mountable Convertible minitower on rack
  • Operating system: Windows XP Professional 64-bit
  • Processor: Core 2 Duo processor E6700 (2.66 GHz)
  • Front side bus: 1066 MHz front Bus up to
  • Chipset: Intel¿975 X Express
  • Memory: DDR - 2 667 MHz ECC unbuffered
  • Installed memory: 2 GB
  • Maximum memory: up to 8 GB
  • Installed hard drive: 160 GB
  • Hard drives: up to 4 SATA hard drives 2 to maximum
  • Expansion bays: 3 external bays of 5.25 inch and 1 external 3.5 inch bay 2-Bay internal 3.5-inch
  • CD DVD: 16 X DVD + - RW DL
  • Speed variators: controller 4 channels SATA 3 GB s integrated with RAID 0, RAID 1, RAID 0 + 1 capacity
  • Graphics card: NVIDIA Quadro FX1400
  • Expansion slots: graphics PCI Express (x 16) 1 slot 1 PCI Express (x 16 mechanically x 4 electrically) slots 1 PCI Express (x 1) and 3 long legacy PCI
  • Audio: Integrated high definition Audio with Jack Retasking capability,
  • Networking - communication: integrated Broadcom 5755 Netxtreme Gigabit PCIe LAN
  • I/o ports and connectors: front: headphone, microphone, 2 USB 2.0 and 1 optional IEEE 1394 a rear: 5 USB 2.0 1 USB 2.0 (internal) 1 serial port standard 1 keyboard PS-2 port 2 in parallel and mouse audio Gigabit LAN RJ-45 1 built-in audio microphone
  • I have no recovery disks!

  Hello:

  I can't help with your problem, because in this case, my recommendation would be to reinstall the operating system.

  What I can do, is give you information to get a set of recovery discs for your xw4400 for only $10 USD.

  Here's how:

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a Compaq HP xw4400, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (xw4400).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Paul

• What could change the ID of the computer used for licenses in the License Manager OR?

  the site of our client we initially implemented our software that uses the Vision Run-Time and Acquisition of Vision software.    We bought a license for the PC and it has been installed. He has headed since July.   But today the customer started getting errors requesting the license. using the License Manager, OR we see "status: activated for another computer.

  look no further, we now see a different ID 'computer' code I have original screenshots when I applied the license originally so I know that the ID of the computer was not a typing error.

  The customer says person only has swapped the PC, but is currently looking to see if any work has been done.

  Someone at - it expirenced this before?

  Quote: Your computer ID is based on the MAC address of your Ethernet card. In some cases, your computer ID is based on the disk volume serial number.

  Well, my computer has literally just sat there week and this morning it me that LabVIEW was not enabled.  I do not think that the MAC address or the disc has changed in that time.  But who knows.  Our IT is pretty bad.

• Turning the computer off

  After you click "turn off computer", it takes a few minutes to get to "disable."  What can I do to solve the problem?

  By turning off the computer, it is usual to take a minute or less. If you have used a lot of memory, did not run updates, or have an old computer, this will take his time.

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• "When you leave the computer unattended for ten minutes an error pops up that says cannot find the .ocx file flash file.

  "when I return to the computer I have x try it and if I walk for ten minutes and more onus does not find the file flash.ocx.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Flash.ocx is a flash plug-in which is responsible for adobe flash player run on the system

  Step 1: Maybe it's that the flash drive is gone corrupt. I would reinstall it again on the system and check if the problem is resolved.

  Before installing Adobe flash player on the system, make sure that all previous versions of Adobe flash player uninstalled from the system. Download the utility on the site mentioned below, install it and run it on the system.

  Uninstall Flash Player
  http://kb2.Adobe.com/CPS/141/tn_14157.html
   
  Once you uninstall Adobe and then try to download Adobe Flash player Adobe website form. Click on the link below.
  http://get.Adobe.com/flashplayer/

  Step 2: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/310353

• Black screen after leaving the computer idle for some time.

  Original title: Black screen

  Laptop screen starts to turn black every few seconds so I don't use it to take a short break.  The only way to get back the screen is to move a finger on the mouse pad, otherwise, it is just black.  The only way to stop what is happening is to switch off the laptop, wait a few moments and then turn on laptop.  But if I take another short break, this cycle repeats.  Any ideas please.

  Hello

  To provide the proper resolution, I would need more information on your side.

  (1) did you last changes made on the computer prior to this problem?
  (2) did you put the screensaver in a vacuum?
  (3) do you have any particular power on your computer(sleep/hibernate) model?
  This problem can occur if the screen saver is put under vacuum.
   
   

  I suggest you to set the screen saver because none and check if it helps. To configure the screensaver to zero, follow the steps described in the article.

  Change your screen saver
  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.