The CPU usage during the treatment of empty blocks VDR

Similar Questions

• Svchost.exe causing 100% cpu usage during the update of windows, even when disconnected.

  I recently had to re - install windows xp on a new hard drive for replacement. My version of xp home edition, SP2 OEM installation disc. (This is ith group included IE6)

  Once installed and running, could access windows update.

  Read all the threads associated etc. and installed SP3, disc after downloading microsoft on another pc. Installed after three trys, first two caused various mistakes, but third attempt seems OK!

  I've also updated the IE6 to IE8, as some sites obviously did not work properly with the older browser.

  Now go do the automatic updates, or log for manual updates... BUT!

  During the process, my cpu fan comes on fast and permanently! The CPU usage is showing that 100%, pc slows to crawl, the mouse becomes slow etc.

  This has never happened before on this machine before you reinstall clean, he had already automatically updated to SP3 and went very well, it was some time ago, before the failure of hard drive, and it has never had this problem!

  Only since having to do a cleaning manual update and re - install.

  The culprit seems to be svchost.exe, once it is used by the update, running the cpu at 100% and continues to do so EVEN after stopping the service, until I manually stop with the Task Manager!

  The svchost.exe instance showing a high is use: SYSTEM.

  According to the files of help here, it is a known issue and a fix KB927891 was issued for SP2, but this should NOT be necessary for SP3, and in fact difficulty used to perform anyway under SP3!

  Ideas for a guy to fix?

  I appreciate the support for XP runs out quickly, and after this update of windows will be redundant, but in the meantime it is always useful!

  Also if I turn off the automatic updates, how can I stop this annoying popup warning bubble?... I can't live without updating, but this bubble nag drives you nuts! :)

  OK just a update, now running cool and 100% auto update and manual update... How? I hear you ask...

  Well I had a beer and a reflection and came to the conclusion, it must be 'order' in which I updated the clean installation of XP.

  Origin, I loaded the old OEM disc new hard disk, loaded the drivers etc, then stop at windows update for updated files.

  Who told me my old incompatible browser and suggested an upgrade.

  I downloaded and installed IE8... still no joy, reading the forums comments I downloaded and installed SP3... which SEEMED to work, BUT then all the hassle of cpu to 100% with the automatic update and updated manual on the windows don't update site!

  So I just gritted my teeth, formatted the drive, another OEM of XP Home Edition SP2 installation loaded the drivers, installed a copy saved to SP3 and after restarting, THEN installed a saved copy of IE8 and THEN trotted off the coast to the windows update site... low and behold, it the connection without problem, did a search, and required updates appeared on the screen without delay all 123 of them...! :)

  Did the updates, restarted and everything was fine, updates automatic in market and left the machine, after about 30 minutes appears the yellow shield, and it downloads a couple more update files without problem.

  All this time I followed the via the Task Manager CPU usage and the strange spike waited 100% apartment, it was on average from 5 to 20%!...so a great improvement has this effect, by simply changing the order of the updates installed from the original! SP3 IE before IE8.

  May not work for all have to do a clean install because of the HD failed, but its worked for me, and I am once more a "happy bunny!

  Dave was soon.

• Excessive CPU usage during online streaming

  Hello!

  First of all, let me tell you how great it is to have a support forum for my new laptop.

  I have a couple of things that maybe someone knows a lot more than myself will not be able to help me with (I hope)

  The first thing is (and the title of this thread):

  CPU use excessive multimedia Youtube streaming while.

  During playback of a standard video stream of You Tube, the processor in the Task Manager is erratic to say the least. The indicator CPU usage jumps upwards to 85%, and during playback, causing the stream to "stutter".

  I use the latest versions of FireFox (17.0.1) and Adode Flash plug in (11.05 r502) even though I know You Tube will flow its media using HTML5, without the need for the Shockwave plugin.

  The second thing is:

  Slow system

  I haven't used this laptop since I bought it new in July 2012. I recently needed to use and found that the entire system is extremely slow.

  I haven't used internet on this computer until today. The software I used is media production tools. However, open the Control Panel, start remote system, using Windows Explorer, any task seems incredibly slow.

  The third thing is:

  Start of this laptop seems to use about 1.2 GB of Washington.

  If someone has any advice they could give me it would be much appreciated.

  Cheers, Dave

  Nice that you share your experience with your laptop, but I will say a:
  You take on the laptop but no one knows what model of laptop you have exactly.

  > CPU usage excessive while Youtube multimedia streaming.
  > During playback of a video stream standard You tube, the processor in the Task Manager is erratic to say the least. The indicator CPU usage jumps upwards to 85%, and during playback, causing the stream to "stutter".
  > I'm using the latest versions of FireFox (17.0.1) and Adode Flash plug in (11.05 r502) even though I know You Tube will flow its media using HTML5, without the need for the Shockwave plugin.

  This happens because of the Forefox or the plug-in for the Forefox.
  Maybe you should try another internet browser

  > The second thing is:
  > Lazy system
  > I haven't used this laptop since I bought it new in July 2012. I recently needed to use and found that the entire system is extremely slow.
  > I haven't used internet on this computer until today. The software I used is media production tools. However, open the Control Panel, start remote system, using Windows Explorer, any task seems incredibly slow.

  How about new installation OS, system using CCleaner and disabling context is not necessary cleaning processes?
  Processes that are running in the background may be checked in MSCONFIG disabled
  But as this feature is recommended for advanced users only, you mustn't touch him without knowing what to do.

  > The third thing is:
  > Initialize this laptop seems to use about 1.2 GB of Washington.

  Do you think that this value is false, or maybe the operating system uses for a lot of RAM?

• Very high CPU usage in svchost during playback of an event in a major newspaper of the events using WMI

  Hello

  I have a very high utilization of the processor in the process 'svchost.exe LocalServiceNetworkRestricted' during playback of an event in an event log in Windows 2008 64 SP02 using local or remote WMI.  The same happens using Wbemtest or C++ WMI code.  The use of WbemTest, "Open forum" (identical to one the GetObject of WMI API) read just one of recent events in the event log:

  Win32_NTLogEvent.logfile = "application", recordNumber = 2615657 (in this case, it was the id since the last event in the very large to the Application event log)

  takes 3/4 seconds consuming thant plus 50% of the monitored computer CPU.  This only occurs when the event log is very large (in my case 1 million records), the event log contains about 10000 events just fine.

  The problem is that I read the complete paper in a remote program and this product CPU usage charge too much CPU to the monitored computer.  I do not read the newspaper of the events one by one, but I'm using WQL queries but I do some GetObjects and the peformance is really terrible.

  Any idea what to change or search?

  Best regards

  Jordi

  Hi jordil,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• "The CPU usage high" during navigation

  What"the CPU usage high" and why is it when just browsing - is harmful and how to reduce it down? Thank you

  Follow the steps mentioned in the articles below provide

  http://www.ehow.com/about_5552689_cpu-usage-high-Vista.html

  http://www.ehow.com/how_5066314_stop-100-percent-CPU-usage.html

• (Redirected) Computer beeps during use. Maybe high disk or the use of the CPU usage?

  New here and new to Dell computers. 1st stop, I have a Dell XPS 13 "i7 6560u 16 GB and SSD 512. When using the computer, I get a series of 2 beeps. It seems to be related to the high use of the disc or the CPU usage. I guess my question is possible to put these notifications for a longer delay or at least decrease the volume of the beeps. I am aware that when I use one of my CSD programs to open a browser and looking for an answer to the question about what there will be times where I could get high uses a of these, that's all just annoying and not really want to turn them off entirely (option I would) I would delay having more time this will happen to until I get through this ,

  I thank you,

  Ben

  Hi w4qed,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• My CPU usage is at 100%, but the task manager says that nothing is more than using 01%

  Last night, I installed the updates for Windows 7 during the stop, as I normally do. He said there are four updates, and one went by pretty quickly. It seemed to get stuck on the second (even though he probably didn't want to - the blue ORB turned and the dots are moving, so I guess it's to large or slow) for a few minutes, three update took slightly less time and at the time he obtained for the release of four, I was paying attention just because I was so tired.

  In any case, I went to start my laptop (Toshiba Satellite) and on black splash screen "starting windows" with the flag/banner, he said that he needed install/configure 360 some odd updates. I had seen this before, although I do not remember how recently, so I thought nothing of it. I still don't know if it meant something significant.

  Now the problem is that my CPU usage is constantly at 100%, yet when I finally managed to open the Task Manager, NONE of the listed processes use anything more than 1%, and those who fluctuate. I can easily boot into safe mode, and from there, I have disabled the start of the process, such as taskbar support and itunes things google related, but I still boot normally to 100%.

  Any ideas? It would be GREATLY appreciated. I'm going to College next year and I really don't want to worry about finding how to get a new machine.

  Thank you!

  Hi Renae92,

  1. You have security software installed on the computer?
  2. High CPU usage occurs after the boot process?

  Method 1

  As the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then I suggest you run the troubleshooter of performance and check if it helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Problem with the Ubuntu CPU usage

  Hello

  We meet a few the next problem with an Ubuntu VM:

  The virtual machine has 8 vCPU (increased from 2 Sockets with 4-core to 8 outlets with a carrot) and the latest VMware tools installed. Even if there is a lot of load on this system, the virtual machine seems to use about 25% to 50% of CPU capacity. The return of the command vmstat 1 during this time is:

  user: 28%

  system: 4%

  inactive: 78%

  wait: 0%

  VCenter statistics shows a spike on the CPU load, but epi only climbs and rest between 25 and 50 percent or a maximum use of 7 309 MHz (about 16,000).

  

  Here are some features of the environment and the virtual machine:

  Server:

  VMware ESXi 5.5

  VMware vCenter 5.5

  HP ProLiant DL380p Gen8

  • 2 x Intel Xeon E5-2620 @ 2.00 GHz
  • 96 GB OF RAM
  • QNAP-TS-869U-RP via iSCSI

  VM:

  12.04.4 of Ubuntu LTS (GNU/Linux x86_64 from 3.8.0 - 36-generic)

  VM-Version 8

  8 vCPU

  8 GB vRAM

  Updated version of the VMware tools installed

  What can we do to improve the virtual machine CPU usage?

  Please let me know if you need further information.

  Thanks in advance

  Christian

  Since a thread can use 100% of a vCPU it may be a problem of thread on your application.

  You should look at the use of the individual processor instead of overall consumption.

  Lets say that the application can use only 1 wire but it uses 100%, this means that it will use to 12.5% of the total cpu resources allocated to this virtual machine. (100/8)

  Linjo

• Allowed to 13.0a1 nightly update. It is hung. Now the > 50% CPU usage

  This morning helped the nightly update manifest. However, he hung Mid-implementation to date. Noticed CPU has increased substantially to about 85%. Tried disabling add-ons, safemode, reboot... Processor clocked constantly higher than 50% now even without launching nightly. Stakes never 100%, but extends between 50% and 92%. I'm puzzled! Ran Malwarebytes and ESET NOD (last)... nothing detected. I completely shut down and rebooted 5 x now. Same question.

  Searched with keywords "CPU usage" excessive and inactive. Found the following link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/presentationfontcacheexe-uses-50-of-my-CPU/4200fe85-458F-4f19-b791-1fe5395304da

  Followed the instructions and it worked like a charm. CPU now idling between 4% and 12%. Candy!

• Satellite R830-1GZ - CPU usage high (> 25%) and increase in the speed of the fan after reactivation

  Hi all

  The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I noticed that when this produces the system interrupts - delayed appeals procedure and Interrupt Service routine appears in the resource monitor > CPU > process and seems to explain the increase in the use of the processor.

  Any ideas on how to solve this problem would be most appreciated.

  I use a Toshiba Satellite R830 1GZ with Windows 7 (64-bit). This problem will not occur when I use the same mouse with another laptop (Dell with Windows XP).

  Thank you very much.
  CM

  > The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I think that the process that controls the mouse MS WLan does not close properly.
  The system to memorize it and therefore the cooling module begins to spin faster because these processes stressed the central unit.

  Maybe its caused by the mouse driver
  Have you checked if there is an update to the driver?

• Satellite C650D - the CPU usage is jumping around

  I bought a Toshiba Satellite C650D 2 months ago and I used the Windows 7 that came with it, thinking that it was fine and dandy until a few days ago, he started having random lag spikes.

  At first he just happen when you watch movies (tried 4 different programs, all reinstalled the driver, scanned for malware, defragmented, you name) and then she started to occur outside the viewing of film aswell. Who did it for me, and I installed Windows XP. I did 3 times now, clean install it Windows XP. Initially, it seemed fine. For a few hours, and then it started lagging really bad, not like in Windows 7, but the CPU usage is jumping all over the boundaries between 1% and 99% at random, but there is no process to take it!

  He lags behind what I do, just open the Notepad can blow. I thought that it would work with a format clean, but no, of course the problem reoccured. It might be drivers, see problems in Windows 7 and XP are somewhat different. I'm in my intelligence ends here on what to do, whatever that is would be helpful.

  Hey Buddy,

  Looks like on your laptop is a background passes process that is causing this different and high CPU usage.

  What happens if you install Windows 7 Toshiba Recovery disk and look in the Manager of tasks? Directly after this installation, you should have a low CPU usage and stable because it s installation of Windows from Toshiba.

• Excessively the CPU usage high on my Equium M70

  Hello

  Recently in the last month my summer CPU usage hit 100% when I m not running any software tax (only internet explore and windows media player).

  It is slowing down the load time and the area near the fan is hot enough.

  I have a Satellite M70-337, with a 1.7 centrino processor and now 2 GB of RAM (formerly 512 megabytes). I upgraded the ram in December and had no problems like that, now it just started happening recently, I have installed everything that would, there is no unnecessary programs running and it was after I restored my computer to factory with the startup disk settings (a month later), he seems to have come from nowhere. On the list of the Task Manager it shows my web browser and Media Player by using most of the CPU, but I could have sworn that they use so far before.

  I don't know if the RAM would have been a factor, but it was the correct RAM for it and windows recognized to 2 GB.

  Why would it suddenly happened any ideas guys?

  Hello

  I have the same model of laptop and at the moment I have no such problems. To be honest, I did new installation OS 3 months ago and after installing Microsoft Update, I noticed this laptop does not work as before. Just for example: if I use IE7 extensively with several different tabs in the Task Manager I can see this need for IE more than 300,000 k of memory and crashes somehow. After the closure of the IE and ending THE process sin Task Manager I can work normally again.

  I don't really know how your operating system is configured, but in the Task Manager, you should see what running process is responsible for the high CPU usage. Maybe some antivir application? Sorry, but it is really not easy to sayt why this happens. Play around with the current process.

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• Satellite P100-219: model seesaw in the CPU usage graph / wireless switch

  Has anyone noticed a trend sawtooth in the graph of CPU usage (quickly repeat that 10% performance spikes) in idle operation? Crampons disappeared after I switched the wireless (WLAN & BT) light...

  Hello

  Usually, if the 3rd program tries to connect to the WLan or the BT will increase the CPU usage. It s not easy to say why it happens because no one knows what you have installed on your laptop, or what settings unique applications have.

• The CPU usage of Flex-2 15 30% when idle after upgrade to Windows 10 * contains large Images *.

  BTW my 15 Flex-2 upgrade to Windows 10 Home took place, working after a few minor updates manual driver (WLAN, graphics)...

  However, since the upgrade, I feel an annoying symptom, which has been reported by users of other brands as well.

  Although I already follow most of related advice (known assassination unnessary process, change of reports), the CPU usage is still constantly around 30%, causing the fan to operate continuously and even more unsatisfactory: extremely affecting the battery life! Using processexplorer that I discovered, that svchost (or one of its processes) is at the origin of the problem, not one of the applications. As I am not able to dig deeper, I wonder what measures taken so far by Lenovo to have the Microsoft fix this problem.

  Attached: screenshots 'notification', 'Treaty', 'system '.

  Other tips are appreciated.

  

  

  

  Mod edit: added warning about large images for those who have slow Internet service.

  UPDATE Oct10:
  

  Went to manually check tile Lenovo Support and offered an update of SystemInterfaceFoundation.exe.

  Run the update and believe it or not: the CPU usage is almost back to normal (about 4%) with browser open FF and AV SW race. less than 2.5% use svchost. Fan turns down to 'stop' or low speed.
  Can someone pls? Be wary of situation for the next few days...

  Update Oct11:

  No idea how to mark this "resolved" thread: System runs stable like a charm. Quiet, low CPU utilization and the normal battery life.

  No other text. Problem solved. See above