The D7000 supports WOL (WakeOnLan) remotely?

Similar Questions

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• What linksys Modem router supports WOL or DHCP reservation?

  Hi all

  What linksys Modem router supports WOL or DHCP reservation?

  Thank you Alex

  Hello. I checked the site made up of Cisco and up to 3000 X & X 2000 has the DHCP reservation and like many Eseries routers they have. Just try to check homesupport.cisco.com.

• The managed behind router switch remote access?

  What is the best way to access remotely to a switch behind a router?  I will use a switch SF300, and there is no server.

  For points of access (PA) behind a router, I give each a diffferent LAN address and port number.  In router I have forward TCP traffic with the single port/LAN IP.  Then using the port numbers with the address of the static router, the browser can remote access to the router or the attached AP.  But where do I put the managed switch LAN port number?  Assume default is port 80 and I would change to 8001 to switch #1; 8002 to switch #2; etc.  Could not find this info in the manual of configurtion.

  Hello

  At this point, I would recommend a call to the Cisco Small Business Centre at 1-866-606-1866 support so that action can be taken and your configuration can be reviewed.

  I have reproduced the concern here and I am able to remotely manage my switch SF300 with an RV082 as the router.

  My rule in the RV082 are as follows:

  Creating a custom topic UPnP service.  Create SF300 application name (it is a basic text field and can be any name), 8001 an external port and internal port 80.  I send to the address IP internal SF300 switch and click the check box.  From there on, I select Add to the list.  Once it appears in my list, I then click Save settings at the bottom of the page.

  Thank you!

  Dave

• JOHN 3 is released, it's the 'official support forum '?

  JOHN 3 is released, it's the 'official support forum '?

  No, this is the forum for the tools being shared through the Adobe Labs program. Currently, it is the Remote Update Manager and Deployer of Exceptions and Exceptions application.

• D7000 Support RAW for Photoshop / Bridge CS4

  Anyone know if there is direct support for RAW files for the new Nikon D7000 for Adobe Photoshop CS4?

  I know there are DNG converter, but she wondered if there were a more direct and easier solution.

  Thanks for your help.

  The D7000 requires at least version 6.3 ACR.  This means that the route DNG or update to CS5,

• Will be the Apple Support IOS still 9.3.5 on my ipad 2 even if it will not upgrade to IOS 10?

  Issues related to the:

  Will be the Apple Support IOS still 9.3.5 on my ipad 2 even if it will not upgrade to IOS 10?

  9.3.5 IOS is still safe?

  Please answer ins a few hours of

  iPads that will stay on iOS 9.3.5 will still run and be fine and app developers will publish app updates should still be compatible with iOS 9 for, probably, a year, or almost.

  Maybe a little of everything and more.

  Even in this case, regardless of apps that is updated will still continue to work.

  IPad 2 will be just fine.

  Do not worry.

• Why don't I have easily select my questions open after the connection support?

  Why don't I have easily select my questions open after the connection support?

  When I connect support communities, I have still no clear idea where to find my support questions which remain open to check updates.

  Seems to me that this should be a great, distinct and separate button on the homepage of support after you have connected.  "My open issues Apple Community Support."

  Is this too much to ask?

  Steve

  1. Click / tap your username
  2. Click / tap 'manage subscriptions '.

  

• This e-mail from the thunderbird support team or a fake email?

  I received an email informing me that my account is almost full and giving me instructions on how to renew my account. I just want to check if this e-mail is really a mozilla thunderbird support or is a fake email.

  the content of the email:

  Subject: [[email protected]] alert low storage limit
  Date: Thu, October 15, 2015 17:00:08-0700
  From: < [email protected] > Service account
  Answer: [email protected]
  To: [email protected]

  Dear [email protected],

  1969-2000 MB

  We noticed that your e-mail account has almost exceeds its limit. And you will not be able to send or receive messages any time now,

  Click here to renew your account.

  NOTICE:
  failure of the renewal of your e-mail account. It will be permanently disabled.

  Thank you
  Service account

  n ' has not clicked on the hyper suggested link again.

  The wording of the messages from the 'provider' is a little off. It may be a phishing attempt.
  Contact your e-mail provider using the details found on an old Bill or use a previous contact address you have used successfully in the past.
  DO NOT CLICK ON LINKS IN THE MESSAGE-UNSUB
  
  
  
  The messages appear to come from - [email protected] , but the reply address is another area - [email protected].
  
  The address of this last was reported as scam
  http://scammed.by/scam.php?id=77518
  
  
  Your question

  This e-mail from the thunderbird support team or a fake email?

  Thunderbird support is not a provider of e-mail and does not send a message like this. I suspect that it is a scam.

  TB - 38, 3 Win10-PC

• I want to prevent access to the ' topic: support ' page. How to accomplish this task?

  I want to prevent access to the ' topic: support ' page. How to accomplish this task?

  You must create the userContent.css file and possibly the record chrome as well if they do not yet exist.
  Note that the names are case-sensitive.

  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a file userContent.css (new) in the folder chrome (file name is case sensitive)
  • Paste the code into the userContent.css file in the Editor window
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userContent.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userContent.css.txt file

• BakerlessPillowwork in the Application Support folder

  I went looking for suspicious files after clicking a download link shaded and found this in my root (?) Record of Support request. Mention this because otherwise I would have thought it was a new file placed by an update, but I have not updated my OSX in awhile

  

  Inside the BakerlessPillowworks folder is an application of process simply called 'agent' and .plist files.

  

  

  I force quit on the process of 'agent' in the activity monitor and put the folder in the trash on a case where (are not empty, but I think that all signs point to him having to be removed)

  I found nothing else on this file for my bets are that it is new, but I hope that someone else could have seen or have a better idea of what it is or what to do.

  Thank you in advance, I made an account just for this post

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  You may have installed one or more variants of the Trojan 'InstallMac '. Please take the following steps to disable.

  The criminal behind this attack tries to make the malware difficult to remove by varying names of the files it installs. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Back up all data before proceeding.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return. A folder named "LaunchAgents" opens.

  Press command-2 key combination to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click on this title to sort the content by date. This will make the related files easy to identify regardless of their names, because they will have the same modification date.

  2A inside of the folder that you just opened, there may be files with the name of all these forms:

  something. AppRemoval.plist

  Something.download.plist

  Something.ltvbit.plist

  Something.notification.plist

  Something.Update.plist

  Here, something is usually an empty string of sense, for example one of the following:

  Epolife

  InstallMac

  Javeview

  Kuklorest

  Manroling

  Otwexplain

  Here are examples, not a comprehensive list. The chain could be anything, and there might be more value of something. Looking for a group of files with the same date of change who match the description.

  Lately, the striker of "InstallMac" a were quick strings 'AppRemoval', 'download', 'ltvbit' and 'update' in the names of its records. For example, you might see file names such as these, instead of the above:

  something. AppVemoral.plist

  Something.dolnwoad.plist

  Something.btvlit.plist

  Something.uadpte.plist

  You may have more than one copy of the malware, with different values of something.

  Place all of these in the trash. If there are other files whose name begins with something, those in the trash also move. You can get a caveat that some files are locked; Delete them anyway.

  Once you've done that, we may not have anything left in the LaunchAgents folder; in this case, you can remove the folder, but otherwise does not delete it. Other files in the folder are not necessarily malicious (though they may be, if you have also installed another type of malware).

  Log off or restart the computer. The Trojan horse should now be inactive.

  3. This step is optional. Open the folder as in step 1:

  ~/Library/Application Support

  and move it to the trash of the subfolders with the name, something you found in step 2.

  Do not move the Application Support folder or anything else inside.

  4. open the Applications folder. If there is an element named something, or "Hell Zip", or with any of the other names listed in step 2, then drag it to the trash.

  If in doubt, press option-command-4 key combination to get the apps by date added. Look at the apps that have been added since you first noticed the problem. If there is one, that you don't recognize, drag it to the trash.

  You can get an alert that the item is locked. Confirm that you want to move to the trash.

  Empty the trash.

  If you receive an alert that the application is running, force it to quit.

  5. from the Safari menu bar, select

  ▹ Safari preferences... ▹ Extensions

  Uninstall all extensions, you don't know that you need. When in doubt, remove all of them. None is required for normal operation. Do the equivalent with Chrome and Firefox browsers, if you use one of the people.

  If the window does not open, restart the computer in safe mode. Some caches maintained by the system will be rebuilt.

  6. replace the search engine and home page in each of your browsers, if either has been changed. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

• Disappointed on the Apple Support

  I'm very disappointed on the Apple Support, my Apple ID has been compromised, and 2 devices Apple cannot use for almost 3 months. I had reported my case since April 7, 2016 and talked to little advise so far, to date still my case still sort and all the advise as ignore my cases, never followed my cases and never update me my status of the case, even I sent mail had no response from them. Can someone advise me in this case?

  Yes. Do not post about it here. Rants and complaints are not allowed. Here's the user forums only. We do not consider complaints.

• IAM making purchase I get the message (to the iTunes support contact support) what I need to do

  IAM making the purchase of a war of nations game, I get a message (to the iTunes support contact support) what I need to do

  You can contact the support of iTunes for assistance.

• cannot join the mozilla support

  Failed to register, because the site / /support.mozilla.org/en-US/users/register is not displayed but is up to /auth all the time. Now, you have given me another form of registration to ask this question, so I'm in.
  I wanted to post a reply!

  Yes. This is a bug. We'll soon fix that:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=972269