The Dell TV no extended warranties?

Similar Questions

• Remove the Dell recovery partition and create a data partition

  Hello world

  Two years ago, I bought a Dell Inspiron N5110. In addition to the existing windows partition, I wanted to add a partition Ubuntu as a partition of data (NTFS). Well, I added the Ubuntu partition, but because of the Dell recovery partition (14.65 GB, used 7,69, formatted to NTFS), I had no primary partition left to create a data partition. I did not had the time to solve this problem so far.

  Here you can see the different partitions. 4, 66GB there is the linux swap partition and the 18.63 is the linux partition. Of course, they are contained in an extended partition that is created during the installation of linux using GParted.

  Basically, what I would do, is to remove the recovery partition. I did not throw a look inside, but I read that as it contains bootstrap information, as well as win7 boot no more if I'm deleting it. The partition is marked as 'active' (in contrast to my main windows partition of C). I guess this is a classic problem, but I couldn't find a tutorial or a satisfactory answer on this forum (I apologize if this is the case). I assume that it is not enough to define steps to activate the recovery partition and assign to the partition c active (i.e. they don't going to critical data recovery to the c partition). Furthermore, I read that repartition your drive could affect the functioning of the emergency recovery partition, is this true?

  Thank you very much in advance for your help.

  Greetings,

  Harald

  Yes, sorry, I had a problem and the image has not been correctly incorporated into my message. Here it comes. Sandra means healthy, active, primary partition means that primary partition. However, you will notice that windows see the ubuntu partition is a stretch.

  

• My macbook does not detect the dell wireless mouse

  I have the macbook air. I tried to connect my macbook to my Dell Wireless mouse. But my macbook could not detect the mouse

  Without a model number, we cannot exclude that particular mouse is incompatible with OSX, especially if it is old.

  OS X pair with a large number of devices bluetooth automatically, but some need to be put in pairing mode.  You will find the Dell mouse model and see if that is his business.

• Unable to connect to the network after having extended to a second Airport via ethernet router

  Hello

  I have a 5th gen airport extreme that did a wonderful job providing the wifi to the majority of our House. Unfortunately, in our room on the floor, we have a (good) connection causing a constant depreciation with netflix that my wife was not fond of.

  Today, I ran a line of 100 feet of ethernet in my attic and connected my previous dual band gen 3 airport extreme. I have reset the router and configured from scratch. When it has completed the Installation Wizard to "expand my current network." as soon as the router is online, our network goes off. I can unplug the second router and starts all over again. but when it is connected. my devices ask for network password and fail to connect.

  how our network is set up:

  Modem - Airport Extreme (5thgen) - ethernet 8port switch - Airport Extreme (3rdgen)

  All are wired using the cat6 cable.

  Any help would be greatly appreciated.

  Please perform a hard reset on the 3rd Gen AirPort Extreme as follows:

  Turn on the airport for a few minutes

  Pressed the reset button on the back of the AirPort Extreme for 5 to 6 seconds

  Release the reset button and allow a minute for the airport restart to a slow, flashing amber light status

  

  Temporarily, move the 3rd Gen airport close to the airport of Gen 5 th and connect short, spare Ethernet cable... no matter what length will make... among the <-->LAN ports on the 5 th Gen to the "O" WAN port on the 3rd Gen airport

  Turn on the 3rd Gen airport for a minute or two

  Rerun the installer... who will suggest that the 3rd generation will extend the signal of the 5th generation, enter a name for the 3rd generation device and click Next. Your screen will be similar to the example below, but will show your devices and the network name.

  

  Monitor the following very closely to ensure that the 3rd generation is currently set to spread with Ethernet.  This indicates that the installation wizard recovers the Ethernet connection, so the 3rd generation will be configured correctly.

  

  Wait another minute until the 3rd generation is configured and working properly... and check that it causes NO problems on the network as if it was before, when it was not properly configured.

  Now move back the 3rd generation to the remote location and connect the Ethernet cable to the WAN port on the 3rd generation.  If your cables Ethernet works correctly, the 3rd generation will work properly.

  If the 3rd generation does not work properly, then you will need troubleshoot the Ethernet connection and, eventually, the Ethernet switch... Since you know that the 3rd generation has been put in place properly and it works well with the other short Ethernet cable.

• Card PCI-6259 is compatible with the Dell Precision 390?

  Hi all

  I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

  Thanks to all in advance.

  Kind regards

  justdomechanicalengineering

  Hello

  We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

  Best,

  Dan Nelson

  Technical sales engineer

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• How can I restore changes to the size of the screen, so that the items do not extend off the screen?

  Original title: solution of "Screen Resolution"?

  How can I cancel a change to the 'screen Resolution' in option 'View' in the 'Control Panel' to decrease the size of the "text boxes", which extend beyond the screen of the monitor if the adjustment slider is off the screen?

  I suggest you take your question to the appropriate forum. This forum is for feedback on the site Microsoft Answers itself.

  Windows 7: http://answers.microsoft.com/en-us/windows/forum/windows_7
  Windows Vista: http://answers.microsoft.com/en-us/windows/forum/windows_vista
  Windows XP: http://answers.microsoft.com/en-us/windows/forum/windows_xp

• is it advisable to improve OS from windows XP SP3, the DELL INSPIRON 8600

  What is the best implemented OS upgraded from Windows XP, SP3 on my DELL Inspiron 8600, computer laptop. Or should I continue to run XP.

  On Saturday, October 10, 2015 01:54:52 + 0000, smling wrote:

  On Friday, October 9, 2015 07:34:53 + 0000, smling wrote:

  What is the best implemented OS upgraded from Windows XP, SP3 on my DELL Inspiron 8600, computer laptop. Or should I continue to run XP.

  The only version of Windows, you can upgrade from XP is Vista. If you
  want to go to the 7, 8, 8.1, or 10, you must do a clean install,
  not an upgrade.

  Note also that if you old computer same peut run a later version, the
  the material on your XP - era machine is probably way underpowered to run a
  newer version with acceptable performance. So moving to a later
  version is not a good idea.

  And another point: If you upgrade to a later version, you may need
  drivers for it are not available. So before you do anything check
  availability of the reader on the Dell web site.

  Mr. Ken Blake, thank you very much for your quick response. I understand the concerns regarding an upgrade. So I continue to run the same Windows XP with SP3 until the machine functions

  Thank you very much

  You are welcome. Happy to help you.

• the dell xps 410 with windows media center 2005 makes it be able to run minecraft?

  I have the dell XPS 410 and I can't get it able to run mine craft due to a warning on my driver is possible to run it?

  You can probably run, but you will need to provide the specific error message, without paraphrase, as well as the following system information. For more detailed advice.

  I imagine that the warning suggests that you update the driver for your video card.

  The Minecraft system requirements: http://www.minecraftsystemrequirements.com/

  CanYouRunIt: http://www.systemrequirementslab.com/cyri

  Go here and enter your service tag to find the latest Dell driver--> http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs

  For more help here, provide your Information system specifications:

  Start > run > msinfo32.exe > OK
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer
  Click + next to 'Components', select 'View' then
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer

• Install/uninstall the dell printer problem.

  The dell disc was downloaded successfully, but my computer can't find it. It's on the list add / delete, but I can't uninstall it to restart the download from the beginning. Uninstall response is: your operating system may not support the printer Dell V715w. Setup cannot continue. It seems to me as if he stopped trying to download which has left in limbo land where are several pc probs.

  My pc says I have great WiFi but when I try to print I get this message that computer does not find the printer and the printer Dell object driver is unknown. I think I met the error message is of 1797. I downloaded & installed all new updated preinter dell drivers and update all my drivers system drivers. Still with no success. I spent many hours no days now trying to solve the problem, according to me, if I could at least uninstall the Dell V715w it might work but used to leave me. Please please help me, I'm at my wits end now.

  Hello

  Use revo uninstaller and uninstall the printer drivers and the software completely and then try to install it recently, this will help you.

  Advance marry Christmas!

• the dell photo printer 720 32-bit vista driver work with xp?

  the dell photo printer 720 32-bit vista driver work with xp?

  No, a Vista driver will not work with XP.

  Check the Dell support site to see if they have XP drivers for your printer.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• How can I make my own CD for the Dell utility?

  Original title: the Dell utility Cd

  I was struck by a virus. I reformat and necenecesary and reinstalall XP drivers for dell optiplex GX 260.tel now all work fine. It took me days to fiind girls drivers needed to restore my system. My questionis: How do I make a recovery cd with all the drivers (such as the utility cd), to prevent any future pain. Dell is no help. Thanks in advance for your time and help.

  All you have to do is save the driver files to CD, DVD, USB, external drive, or second disc, etc.. Use any media you wish, attach or insert the right bracket on the driver file that you want to save and choose send to, then click on your media and a copy will be sent it.

• I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else).

  Hi all.

  I just installed windows XP Pro on one of my computers. Now when installing, it showed me the main partition C and another extended partition (which was very small). Now windows gave me the option to install Windows on the C partition and it me has failed to use the extended partition, he said is reserved for windows. Now my problem is that it does give me an option to create a new partition (except on the extended unallowed was D). I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else). I want only the OS on C. How do I do that? The PC has a single 79GB hard drive

  Hi DextrousDave,

  Refer to the article below to learn more about partitioning during the installation of Windows XP.

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Get message specified print monitor unknown when you try to install the Dell A920 printer. Any ideas?

  Try to reinstall the Dell A920 printer. He stopped working because I kept getting a message saying "soecified unknown print monitor. I removed it by using control panel/Add Remove Programs, now I can't reinstall it on the CD. I get the above message when trying to load it.

  Thank you.

  Problem solved. A server called LexBce did not work, it has been disabled.

  To fix it, I went to start / my computer

  I have a click right on my computer and select manage. When the window open, I open Services and Applications, and then open Services. I then scroll to LexBce Server, open only to the top, under the general tab change the startup type to automatic, and restarted the machine. The Dell software then loaded properly and now the printer works.