The diagnostic policy Service is not running

Similar Questions

• Windows 8 - unable to connect to the internet - the diagnostic policy service is not running

  Have new laptop acer with windows 8 installed - purchase - I could conntect to the internet.  I can no longer connect to the internet - I get the error msg - diagnostics policy service does not work - how to fix this? Thank you

  go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

• 'The diagnostic policy Service is not responding' after updating iTunes

  I received error message 'The diagnostic policy Service is not responding' since my wife click and ran an update to iTunes. I tried to remove iTunes and restarting, the system restore and sfc/scannow. Any other suggestions?

  Hello

  I suggest that you follow the steps below and check if the problem persists.

  Step 1:

  a. Click Start, type "Services.msc" in the search box, and select 'Services '.
  b. search for 'Diagnostic policy Service' and right-click and select "Properties".
  c. now, restart the service as well as addiction services

  Step 2:

  Test the issue in a clean boot State, and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

• Diagnostic policy service will not run despite all methods found to fix

  As stated in the subject, I can't get my diagnostic to run, strategy service that prevents me to perform troubleshooting services and others. I started having problems earlier when my laptop stopped while he was starting because the wire had been disconnected and I didn't know it. I've done several things to get to where I can do everything well on, but I always get an error every now and then, and it's bugging me that I have something important works do not here. I am still able to connect to the internet since I did the whole NET add thing, but it does not solve my problem. I reinstalled the networking stuff and messed with the registry as well. I can't understand the problem at all and I was wondering if there is something that I missed somewhere in the forums. I am running windows 7 64 bit. Also I am not able to update windows and have many updates from Add. This is why I need this fixed number so I can run a convenience store for that matter. I'm also out of town for 4 days, but I can come back when I get back.

  Hello

  You can perform a clean boot to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts that occur when you install or run a software program. Click on this link and follow the steps for Windows 7.

  When you're already in the boot environment, we suggest that you download the Microsoft easy fix solution to solve the problem that prevents you to Windows Update. Click on this link to download it and run it, and then follow the instructions that appear on your screen.

  You can also use the System File Checker tool to repair missing or corrupted system files. Steps are described in this link.

  Let us know how it goes.

• Windows 7: diagnostic policy Service does not

  Our internet does not connect to our PC, even when manually connected with the ethernet cable, but all our wireless devices such as iPhones and laptops to connect properly. We troubleshooted and showed a message saying "the diagnostic policy Service is not running, click to start as administrator." After clicking, we are shown that the error is that the diagnostic policy Service is not running (basically going in a circle), error 5. Everything else on the computer works fine, as far as we know.

  The night before it was passed, we found a little unbalanced PC Tower and we believe that our cat got on the computer table because the documents were scattered. It is possible that the Tower topple made something come loose which prevents the DPS of the race?

  Windows 7 Ultimate.
  Lenovo computer.

  We tried several system restores that have failed.

  I tried all these things and I ended up fix:

  go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Open services and make sure that the service is started.

• service or group of addiction was able to start; Cannot start the diagnostic policy service

  I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

  Hello, Lesley

  Thank you for using the Microsoft answers Forum!

  The following information is taken from: http://support.microsoft.com/kb/943996

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

  It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• Restart the diagnostic policy service

  logged in as administrator. try restarting the diagnostic policy service. Get the system 5 - access denied error

  Hello

  To restart the diagnostic policy Service click 'Start', type cmd , then right click on cmd and select "run as Administrator".

  After it opens type following commands

  net stop dps and press ENTER, and then type

  net start dps and press ENTER.

  Hope this helps,

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Operation could not be performed. The print spooler service is not running

  I get the error message "operation could not be performed. The print spooler service is not running. "How to start the service on Windows xp print spooler?

  Click Start--->run---> Type ' services.msc"--->OK and scroll down to print spooler entry and right-click, select Properties, set Startup type and in"service status", click the button to start the service."

  Good luck.

• The print spooler service is not running

  I had a virus that I got rid of but now my printer does not print, it comes up with "the print spooler service is not running" and I can't add a printer.  What should I do to solve this problem.

  It's pretty easy to start the print spooler service... but may not stay started.

  To restart the print spooler:

  • Click Start, click Run, and then type services.msc in the run box, and then click OK
  • Scroll down the list until you get to the print spooler and double-click the entry
  • Make sure that the "Startup Type" is "automatic".
  • Click on the button 'Start '.
  • OK your way out

  In the likely case where this isn't a solution permanent for you, when you post, include the following information:

  1. What version of Windows you have, including the service pack (start > run > winver > OK)
  2. What make and model of printer you have
  3. What antivirus you have installed
  4. If your computer was without an antivirus application or current subscription for your antivirus (in other words, how is it you got infected in the first place)
  5. What steps you have taken to determine that your system is now free of malware (i.e. what applications antivirus and antimalware you scanned the system with)

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The diagnostic policy service 5 error: registry will not accept permissions__

  A lot of my services will not work because they are dependent on the th diagnostic policy service. When I try to read the dependencies on the DDA, I get "critical error from WMI. I have spent many hours, as a result of many suggestions, but still cannot solve this problem. Lately, I've made the change Reg suggested in this forum, add TrustedInstaller to settings. I clicked to give total control, but when I clicked 'Apply', the check for permissions marks have been removed. I did it five times with reboots. The registry does not accept these amendments. Can you please specify?

  HI Joan,

  I recommend that you check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The diagnostic policy Service 2 error

  So, recently, my PC was off, due to the fact that little milk poured on him, (drops) this has my PC down, on a style screen Popes starting cmd and begins to browse my PC and deleted files, it was not a virus because I had anti virus running 24/7 and would like to notify me if there is , but aparently it deleted a dossier on the service strategy diagnosis and I do not know how to retrieve, iv tried to do a system recovery PC but it does not, iv tried to download a file .reg for her and it didn't work, so is there any other way for me to retrieve the file Diagnostic Policy service?

  Hello

  Thanks for the update.

  We can refer to the article below and check if that helps.

  https://social.technet.Microsoft.com/forums/IE/en-us/e76305bb-41dd-4baa-B2AE-52c7ec1a9586/diagnostic-policy-service-missing

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.