'The diagnostic policy Service is not responding' after updating iTunes

Similar Questions

• Windows 8 - unable to connect to the internet - the diagnostic policy service is not running

  Have new laptop acer with windows 8 installed - purchase - I could conntect to the internet.  I can no longer connect to the internet - I get the error msg - diagnostics policy service does not work - how to fix this? Thank you

  go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

• The diagnostic policy Service is not running

  I am running win 7, no major changes.

  Early on I get this message. I saw the messages about the regedit, but it contains the key to note, however, even if I wanted to add a key, it won't let me!  I'm sick of not being able to run my computer!  PLEASE SOMEONE ME SAY HOW TO GET RID OF ALL THIS _ OF SECURITY I CAN DO MY WORK!  OR LEAST HOW TO GET TROUBLE SHOOTER WORK!

  Srazvi

  Try the steps listed in this article.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service.

• Windows 7: diagnostic policy Service does not

  Our internet does not connect to our PC, even when manually connected with the ethernet cable, but all our wireless devices such as iPhones and laptops to connect properly. We troubleshooted and showed a message saying "the diagnostic policy Service is not running, click to start as administrator." After clicking, we are shown that the error is that the diagnostic policy Service is not running (basically going in a circle), error 5. Everything else on the computer works fine, as far as we know.

  The night before it was passed, we found a little unbalanced PC Tower and we believe that our cat got on the computer table because the documents were scattered. It is possible that the Tower topple made something come loose which prevents the DPS of the race?

  Windows 7 Ultimate.
  Lenovo computer.

  We tried several system restores that have failed.

  I tried all these things and I ended up fix:

  go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Open services and make sure that the service is started.

• service or group of addiction was able to start; Cannot start the diagnostic policy service

  I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

  Hello, Lesley

  Thank you for using the Microsoft answers Forum!

  The following information is taken from: http://support.microsoft.com/kb/943996

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

  It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restart the diagnostic policy service

  logged in as administrator. try restarting the diagnostic policy service. Get the system 5 - access denied error

  Hello

  To restart the diagnostic policy Service click 'Start', type cmd , then right click on cmd and select "run as Administrator".

  After it opens type following commands

  net stop dps and press ENTER, and then type

  net start dps and press ENTER.

  Hope this helps,

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• The diagnostic policy service 5 error: registry will not accept permissions__

  A lot of my services will not work because they are dependent on the th diagnostic policy service. When I try to read the dependencies on the DDA, I get "critical error from WMI. I have spent many hours, as a result of many suggestions, but still cannot solve this problem. Lately, I've made the change Reg suggested in this forum, add TrustedInstaller to settings. I clicked to give total control, but when I clicked 'Apply', the check for permissions marks have been removed. I did it five times with reboots. The registry does not accept these amendments. Can you please specify?

  HI Joan,

  I recommend that you check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The diagnostic policy Service 2 error

  So, recently, my PC was off, due to the fact that little milk poured on him, (drops) this has my PC down, on a style screen Popes starting cmd and begins to browse my PC and deleted files, it was not a virus because I had anti virus running 24/7 and would like to notify me if there is , but aparently it deleted a dossier on the service strategy diagnosis and I do not know how to retrieve, iv tried to do a system recovery PC but it does not, iv tried to download a file .reg for her and it didn't work, so is there any other way for me to retrieve the file Diagnostic Policy service?

  Hello

  Thanks for the update.

  We can refer to the article below and check if that helps.

  https://social.technet.Microsoft.com/forums/IE/en-us/e76305bb-41dd-4baa-B2AE-52c7ec1a9586/diagnostic-policy-service-missing

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows could not start the diagnostic policy service error 5 access is denied

  This started happening when I accidentally turned off my computer while it was the starter.

  I tried sfc/scannow, I did the CMD (net localgroup administrator) thing and tried manually from politics, nothing helps.

  Here is a screenshot of what, in my view, seems to be the problem. I am the only administrator of my computer,

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem can occur for the following reasons:

  -Windows Firewall is not defined by default.
  -Windows Firewall does not start.
  -Windows could not start the Windows Firewall.

  I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.
  Reference:
  Some services do not start in Windows Vista and Windows 7
  http://Support2.Microsoft.com/kb/943996

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• manually start the diagnostic policy service 5 error: access denied

  Cannot start manually diagnostic policy receive error 5: access is denied.  I can not connect to wireless internet or start my firewall.

  Hi tankrum,

  The article below describes the problem faced by you. Click on the tool of automated troubleshooting described in the article below to solve the problem.

  Some services do not start in Windows Vista

  http://support.Microsoft.com/kb/943996

  The problem should be gone after running the troubleshooter.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Diagnostic policy service will not run despite all methods found to fix

  As stated in the subject, I can't get my diagnostic to run, strategy service that prevents me to perform troubleshooting services and others. I started having problems earlier when my laptop stopped while he was starting because the wire had been disconnected and I didn't know it. I've done several things to get to where I can do everything well on, but I always get an error every now and then, and it's bugging me that I have something important works do not here. I am still able to connect to the internet since I did the whole NET add thing, but it does not solve my problem. I reinstalled the networking stuff and messed with the registry as well. I can't understand the problem at all and I was wondering if there is something that I missed somewhere in the forums. I am running windows 7 64 bit. Also I am not able to update windows and have many updates from Add. This is why I need this fixed number so I can run a convenience store for that matter. I'm also out of town for 4 days, but I can come back when I get back.

  Hello

  You can perform a clean boot to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts that occur when you install or run a software program. Click on this link and follow the steps for Windows 7.

  When you're already in the boot environment, we suggest that you download the Microsoft easy fix solution to solve the problem that prevents you to Windows Update. Click on this link to download it and run it, and then follow the instructions that appear on your screen.

  You can also use the System File Checker tool to repair missing or corrupted system files. Steps are described in this link.

  Let us know how it goes.

• ColdFusion service does not start after update 12

  Hello

  I'm running CF10 on Windows 2008 R2 server.

  Today I applied the update patch 12 to my server Coldfusion10 installation and now 10 Coldfusion Application Server does not start.

  After installation I ran configuration of the Web server, such as recommended. Now, when I start from server manager concole I get an error Windows cannot start Coldfusion 10 application server...

  When I start the Coldfusion Administrator I get page with:

  Service temporary unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.

  Jakarta/ISAPI/isapi_redirector/1.2.32)

  I downloaded the patch directly from this http://helpx.adobe.com/coldfusion/kb/coldfusion-10-update-12.html page after update running administrator and download failed several times.

  I restarted the server box, but it did not help.

  Any ideas?

  Thank you

  CF10 reinstalled, now works

• How do you re - start the diagnostic policy Service that is not running now?

  I can't update windows 7. I can't use my laptop wireless because it won't work if it is directly plugged into the router because of this problem and I can not access several programs. How can I get the Service of Diagnostics policy to start running again. Please, help us!

  I can't update windows 7. I can't use my laptop wireless because it won't work if it is directly plugged into the router because of this problem and I can not access several programs. How can I get the Service of Diagnostics policy to start running again. Please, help us!

  I finally found the answer to this and if you are looking for yet are simple, but you never know for making trouble.

  Start a command prompt, and then:
  Type:
  
  
  net localgroup administrators / add networkservice
  
  
  and then press ENTER.
  Then type:
  
  
  net localgroup administrators / add localservice
  
  
  and then press ENTER.
  Then type:
  
  
  output
  
  
  and then tap on enter, and then restart your computer.

  Open services and make sure that the service is started.

• Why do the message "web page not responding" after update to IE9?

  "" thought update to IE9 would make my faster browsing, but it actually slowed down because I get the message "web page answers do not. I just need to uninstall it, or are there other solutions?

  Hi Lolly219,

  Have you installed Internet Explorer (IE) 9 or all played updates for IE 9?

  You can try the following steps and check if it helps:

  Method 1:

  You can try to start the fixit from link and check if it helps:

  Troubleshoot Internet Explorer to IE quick, safe and stable

  Method 2:

  You can read the article and try the steps to solve the problem:

  Tips for solving problems when Internet Explorer hangs or stops working

  Note: The above article contains steps to reset IE. Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Method d:

  If the problem persists, you can visit the article to repair or reinstall Internet Explorer 9:

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP