the envy 15 - k238nd: want resolution maximum 15-k236nd

Similar Questions

• HP Envy 15 - ae 117nf laptop: I can't move the cursor where I want

  I bought my HP Envy laptop two days ago and wonder if I should go back to the store or if I can fix it myself: I can't move the cursor where I want. For example, I wrote a facebook message and wanted to go to midway up the message to correct anything, but clicking on the keyboard at the right place would not the cursor move, only using the up button worked, which is not practical. The same thing with tripadvisor - I tried to click further up in my review to correct something, but I couldn't place the cursor where I wanted, only the up button worked. Please, someone knows why this is happening and is it a fault with the computer?

  Thank you!

  Hello

  Try the following.

  Download the Setup program of the Synaptics driver from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74369.exe

  When finished, open windows control panel and on the top right, next to the display by: select "large icons".  Since the new layout, select programs and features, right click on the entry "Synaptics ClickPad Driver" and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right-click on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• HP ENVY 15-k238nd: impressive machine with wifi not so good? 72Mbps is normal that thing of bgn Broadcom 802.11 BCM43142?

  This machine, HP ENVY 15-k238nd is quite the internal parts. Apparently, it was an outgoing model so I got it cheap in November.

  GTX video card. Reasonably fast processor i5 to 5200. 8 GB of RAM. Full HD screen. Wonderful. Really.

  Until I connect to Wifi.

  I was wondering why my child was always complaining about lag in minecraft. I have a 100 Mbps fiber-optic connection. I just installed two new grade expensive company AC for fast WIFI access points. But it seems that this HP beast will get no more 72Mbps AP. Speedtest.net, indicates a maximum speed of 21Mbp.

  My MacBook Pro does 856 Mbps, speedtest.net: 92 MB/s.

  My laptop Windows EIGHT years with the first generation Intel 4965AGN who is breathing wheezing and puffing along in all other departments yet running WIFI to a strong 300 Mbps, with the same speedtest numbers: 91 MB/s.

  HP support has been very helpful to the research on the thing and the installation of other drivers and even made a reset system (that killed my son minecraft records) which did not help. I think that the card will not do more than that. 1 x 1 antenna? Why isn't supported HP recognize that early? Their technician worked for three hours with me. It's got to cost more than a map of network plus reasonable?

  Is it possible to install another of the miriad of cheap DFÜ AC that are available? The guide shows only this Broadcom. Anyone? Y at - it another card that might work? On the net, there are stories of the years on this map. How is it still stuck HP that align it's less cheap laptops with all the other components that are very respectable?

  Resolution: I bought an Intel Dual Band Wireless-AC 7260 card. Not a specific card, just an Intel AC-7260 HP. Dial-up with no problem and the networking is now incredibly fast. Problem solved.

  I hope in future HP stop economy tithes on a portable Euro 800 and he equip with a consequence good network card.

• Boot from the second disk to the Envy 17

  I just installed a second HARD drive in my new Envy 17 3270nr (hybrid). Since this new drive HARD is supposed to be faster than the original one, I want to have this new as my main drive (disk 0) and boot from it. I cloned the HARD original (disk 0) on the new disc (disc 1) and everything looks OK, when I open the Disk Manager, but in the configuration of the BIOS, it seems that I can't choose between disc to boot from, I can only switch between other external or internal devices boot order and internal hard drive. Would be very grateful for your advice!

  It's real simple... you can't boot from a drive in the second. Without them.

• Save pictures to the ENVI format

  Hello

  I do the image acquisition using a PCI 1426 acquisition card and the requirement, I have save the images to the ENVI format. When I searched for information on the ENVI format I found this link: http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1?pli=1

  Apparently, there is a header file in which the information of the captured image are registered. The device that I use is a line scan camera and capture energy strips any (not exactly what it is). What I need to know is, can I save the images captured in ENVI format? If I can, how can I write the header for the file information?

  Thank you

  Sandeep

  I think that I finally understand how to work with / create files Environment. In my application, I have a camera online scan that will scan/capture only a row of pixels in an image. It's like a normal camera, but the resolution of the image in terms of the complete image is an X by 1. In my case 800 X 1. The camera returns actually a 800 X 270 resolution image, but what represents the 270 is 270 bands of energy that the camera caught for that row of pixels. If the camera has captured 270 each resolution 800 X 1-band information.

  Now what happens after this is the case, the camera pivots from one (very small) angle and captures an another 270 information strips. How many groups is captured.

  Suppose that I captured 270 band information in 300 different positions of the camera. That is to say an image of 800 X 270, turn some angle to take another image of 800 X 270, turn a few angle etc... 300 times.

  Now, the ENVI header file should have the information

  Description Environment = {created ENVI file [3/17/20093:47 PM]}

  Samples = 800

  Lines = 300

  Bands = 270

  header offset = 0

  file type = standard Environment

  data type = 12

  Interleave = bil

  sensor type = unknown

  byte order = 0

  wavelength units = unknown

  Allows to observe some important fields from the list above

  (a) samples - it's the horizontal resolution of the image is captured. (800 in the resolution of 800 X 270)

  (b) lines - this represents the number of frames you available for capture. By lines of what this means is the number of lines (rows) that will be present in the final image that we will build with all the information you entered.

  (c) bands - this represents the number of bands of energy that the camera captures in each image, in this example it's 270 (the second part of the 800 X 270).

  (d) the offset of the header - this indicates if there is no header information before each image information.

  (e) type of file - standard Environment (explicit)

  (f) type of data - how many bits is taken to represent each pixel. My camera takes 12 bits to represent each pixel.

  (g) interleave - this indicates how the data is organized in the binary file. Certain amount of explanation is needed here, because there is confusion.

  Any ENVI file is actually two files, the header which has the above information and the second is the information of the image that is defined in the header file. So, the header file is like a map of the information of the image (in binary). Is what I'm doing, I capture a series of images and write a binary file. Thus, the first line in the binary file will be the first band of the first image, which is the first line of the 1st image of band. The second row will be the second strip of the first image that is in the 1st row of the second image of the band. The 270th line is the 270th band of the first image, which is the first line of the 270th band image. 271st ranked is the first group of the second captured image will be the second line of the 1st image of band etc.

  Therefore, we receive 270 (number of bands) resolution images 800 X 300 of 300 images in resolution 800 X 270. Each of the final pictures will be a bunch of information value. A row of PIX of each of the 300 images form a final image.

  This link has a lot more information about Environmental format images http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1

  There are many more parameters as those explained above, but the above are sufficient to start.

• The exported photos has random resolution

  Photos Version 1.5 (370.42.0)

  When I export from RAW to JPEG with full-size or custom is always to export images as 20% I expected and the rest with a small resolution. I checked the original size of the raw and all goes well, so some BUG and problem in the process of exporting the Photos app.

  If will not be fixed I'll be forced to upgrade to Lightroom or something like that, unfortunately.

  Please rephrase your question as it is currently not clear

  LN

• I look at the TB dashboard seen comes from open TB. On the left, I see folders. The folder "sent", lets say, is higher than the "Outbox" folder I want to

  I look at the TB dashboard seen comes from open TB. On the left, I see folders. The folder "sent", lets say, is higher than the "Outbox" folder I want to put the "Outbox" folder above the folder "sent". How do I do this ever?

  I know that the addon will allow you to rearrange accounts, so you could put 'Local folders' over another e-mail account.
  It will also allow you to use files within an account.

  So if you have a Pop email account that uses the Global setting of the "Inbox", then it should allow you to move the position of the Outbox within this special account.

  But as the 'Outbox' is a 'Local folder' folder, I'm not sure that you can move it out of "Local folders" and reposition it on another account.

  The method for moving files is done via the menu bar.
  'Tools' > 'manually sort folders ".
  Select the folder and use "move up" or "Down" buttons.
  Then click on the button "refresh folderpane' to see the new sort order.

• Thanks for your help. I can look to iCloud by car and see its contents. However I can't iCloud pictures like this to see the content, etc. This is the reason why I wanted to disconnect from iCloud. I had hoped to sign new one

  Thanks for your help.

  I can look to iCloud by car and see its contents.

  However I can't iCloud pictures like this to see the content, etc.

  This is the reason why I wanted to disconnect from iCloud. I had hoped to reconnect and see if I could get then in my photo iCloud content!

  Maybe I have the wrong approach?

  can you tell me if the Photos on my iPad and iCloud photos are one and the same?

  any help appreciated...

  They should be the same.

  To display your iCloud on your iPad photo library you're following the steps below?

  Go to iCloud.com using Safari.

  Keep your finger pressed on the semicircular arrow at the end of the URL bar.

  Press "Ask site desktop."

  Connect to your iCloud account.

  Tap the photos icon.

• How can I stop firefox from going derectly on the site? I want to go to google.

  Can someone please. Whenever I search it takes me on the site. I want to be able to search and go to google.

  I want to be able to search the Web directly from the address bar. Just type your search terms and press ENTER. Firefox will take you to the Google search results page.
  I want to be able to do this.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Anyone know how?

  Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Someone knows how, I could not find where it change?

  See http://kb.mozillazine.org/browser.cache.disk.parent_directory

  You can also install portable Firefox version, if you want to run Firefox on a disc of SS.

  • http://PortableApps.com/apps/Internet/firefox_portable

• I want to use Outlook Web Access for Mac, I don't want to use the light version, I want the full version, but you can't push off the mark. I have firefox 3.6.10

  I want to use Outlook Web Access for Mac (snow leopard 10.6.8), I don't want to use the light version, I want the full version but I can't push off the mark on the light version. I have firefox 3.6.10

  (1) you must update at least Firefox 3.6.24 because there are questions of SECURITY of KNOWN MANY with the version you are using.

  (2) the light version is required on non - IE browsers, except if you are running Exchange Server 2010. With Exchange 2010 they added support for multiple browsers run in the version "no light".

• How to reset the password lock screen? I know the current password only wanting to change it.

  I only know that the password, now I want to change it.  How can I reset the password lock screen of my iPad?

  Try the settings > password > change password.

• How to get the game that require a resolution of 1024 x 768 to work on my book?

  Hello

  How can I get the games requiring work of resolution 1024 x 768 on booklet?
  Any solution for this?

  Thank you

  Hello

  I assume you mean on the Libretto W100.
  The device supports a 16:9 screen with a resolution of 1024 x 600.
  If unfortunately 1024 x 768 is not supported

• I've been using 3.6 because I like the easy to navigate in the toolbar and the appearance! I want to continue with this provision, but I keep getting messages asking me to upgrade. I installed firefox 8 and I am satisfied with its appearance. Download a p

  I like the look of older versions of firefox (pre V4) how do the same toolbar in previous versions as with firefox 8?

  You can change the interface in Firefox 4 (and newer) versions to resemble Firefox 3.6.x.
  
  See:

  • http://www.computertechtips.NET/64/make-Firefox-4-look-like-FF-3-6/
  • http://blog.fligtar.com/2011/01/16/how-to-customize-Firefox-4S-UI/
  • Also see-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox
    • Tabs on top--> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-tabs-on-top-of-the-location-bar-now
    • Button Menu Bar vs Firefox-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-the-menus-file-edit-view-etc-missing
  • Firefox 3 theme for Firefox 4: https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
    • Add House color, front/rear and other buttons (such as Firefox 3) in the Navigation bar instead of the grey buttons in Firefox 4
    • See: http://ffaddons.game-point.net/ff3ff4/
  • Also see->http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar

  Status, replaced by the module bar bar in Firefox 4
  
  To add some features of the old status bar, install the extension of The State-4-Evar : https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

  After installation,.

  1. Make sure that the bar of the add-on is displayed; View > toolbars, click to check the ' bar of add-on.
  2. In view > toolbars > customize drag all or part of the 3 elements to the position that you want in the bar of the add-on:
     • Status text (this is the desired URL information)
     • Download status (shows no. downloads or the number of current downloads)
     • Progress meter (loading the page counter)
  3. Set state-4-Evar options in tools > Modules > Extensions

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox