The factory failed recovery

Similar Questions

• Contained in the factory of recovery failure

  3000 N100

  Type: 0689 A42

  Vista Basic

  Background:

  I pressed the F11 at startup the rescue and recovery program in order to have a recovery (content of the plant).

  Then, the system has begun to preload the customization. However, in State of play (the sixth auto-boot), he came out an error message. I clicked 'OK', then it reboot. If the next boot in Windos, it asked me to restart the installation.

  The error message:

  Windows could not parse or process unattend answer file.

  [C:\Windows\panther\unattend.xml] to pass [auditUser]. The parameters

  When processing parameter for the component

  [Microsoft-Windows-Deploment}

  I have a ghost image and try to get it back again to the factory content. But I get the same result. What should I do? (Help)

  Thank you...

  you did a recovery media before starting this whole process? If you do, use it and reinstall the whole system with it.

• An error occurred during the creation of the factory data recovery - how can I know what is the error?

  I have a new Dell Inspiron 15 5000 series laptop.  Trying to create a backup on an external hard drive plant.  I tried to attach the USB at various times in the process and several USB ports, but always end upward with the same error message ' year error occurred while creating the factory recovery data.

  I tried to "update", but when I select UPDATE, the only option is to UPGRADE to premium, I can't find a way to UPDATE.

  This is the end of the story: I had two sessions of phone with Dell Technical Support, and their solution was to send me a flash drive with backup and restore files.  The next day, I got a Dell alert that a new backup and restore (version 1.9) download is available for Dell computers, which were updated to 10 Windows (what I did as soon as I got my new laptop).  I had the chance to download the file and run it today, and it works.

  Thanks for your suggestion.  It seems that my problem occurred just in front of the Dell solution.

• Restoration of the factory without recovery disks

  Hello

  I bought a new laptop Sony Vaio VGN-AR870 in June 2008 and I enjoyed it a bit. It seems to me have succeeded to it bogged down and it works more slowly and more slowly and for a long time and I have remember how it is used to run when I bought it first of all I would like to restore it to factory settings and to give it another go, so to speak. I don't have recovery discs and I did everything when I got the laptop. How best should I go to this topic? My system restores are all set points in recent months, it is a step to go. Could I use a friends vista windows recovery disc and just manually install the drivers from the Vaio esupport site?

  Thanks for reading,

  Jordan

  I had an old set of model V from Sony. Backstage staff showed me by pressing F10 continuously when you start will bring you to an option of restore factore. But keep in mind that he wiped out all of your memory.

  I used to do once every two months and it has worked like a charm.

• Laptop will not reinstall windows after the factory system recovery

  So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

  After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

  The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

  http://welcome.HP.com/country/us/en/contact_us.html

  Problem with the HP recovery process, contact HP at the link above.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Should I have the original keyboard for the factory system recovery settings

  HP Omini 220-1180qd desktop

  Win 7 64 bit

  My all-in-one PC has sent repair HP because the new second hard drive has failed. When he returns, should I the original keyboard to launch upward with the new system?

  I have a wireless Logitech MK300 who is older and I am away from home where the original HP keyboard. I appreciate your help and won't cause a problem with the new configuration.

  I suggest using the regardless of the type of initial connection

  PS2 or usb

  but should strive to put in place that long, the device can detect your keyboard

• receive a 0x4001100200000100a when using the factory DVD recovery

  I tested both of the hard drives and memory, and they all spent it is a Pavilion DV9740 us laptop any help would be greatly appreciated

  solved the problem, that the computer has 2 separate 160 GB hdd and primary one must have been fried because I opened the back and it was dinner warm to the touch, so I installed the secondary hard drive and it's working now

  Thank you for all the information

  Chris

• I need to do a restore on my laptop but I upgraded from premium to ultimate on the line, the restoration will cost the factory how to re - install my upgrade printed only email to purchase

  I have a Sony Vaio VGN series laptop PC that is corrupted and requires a complete restoration of the factory. Recovery discs when it's upgrade in place, but I'm not sure that it will be part of the recovery. I have the original e-mail printed purchase for online upgrade, including the key I will be able to use it again on the same laptop, it was installed on?

  The first thing you need to do is to get your Windows 7 Ultimate Anytime Upgrade key:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Home Premium or Ultimate.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
   
   
   
  -Samsung uses ESC on most of its systems
   
  -HP use F9 on most of its systems
   
  -Fujitsu uses F12 on most of its systems
   
  -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

  -Dell uses F12
   
   
   
  In general, look at the screen during the POST for a tip for what is possible.
   
   
   
  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
   
   
   
  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click Enter a key, enter the Windows 7 Ultimatekey request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Pavilion G7-1368dx: the factory recovery failed

  A few weeks ago, Windows Update downloaded 10 Windows on my laptop. I tried a few days and decided I didn't like it so I uninstalled and reinstalled Windows 7 on my laptop. I lost the hp Recovery Manager, and by some people on this forum, I ordered the hp dvd recovery. I received the DVD and saved all my personal information. Then following the hp instructions that I started on the DVD and the recovery driver and application of discs. Records downloaded and after installation it says "failed to retrieve from the factory. So I retried 3 times with the same results. I searched the site of hp and found my problem and he said that you must have the wireless switch, but I tried and there is now nothing when I hit the button wireless. I am in desperate need. How can I fix it?

  In fact, I realized that I was wrong to installation with the hp factory recovery disks. If your laptop has wifi the you must have the WiFi button before using the HP factory recovery disks, otherwise it will fail by the Service the customer of HP. Thanks for your help.

• Recovery of the factory from 32 bit to 64 bit with the note system performance

  Recovery of the factory from 32 bit to 64 bit with the note forever system performance, it's about associated wire
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50433
  which is closed/locked, and had no correct answer.

  I just bought a Toshiba L750. After learning of the default Windows 7 installed is Windows 32 bit, I decided to go Recovery Wizard from Toshiba upgrade to 64 - bit. However, the process is stuck to the system performance of note, that repeated several times for 2 hours.

  Given that I guessed that screen performance of system just note one full screen of a normal process of Windows, so I pressed the button Windows start to display the taskbar which showed a component of Adobe installation process has failed. In any case, I clicked on the install Adobe on the taskbar button and close the window.

  The note system performance then continued with about 10 steps ahead after 15 minutes. All well done.

  So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  A suggestion from bits to the team of Toshiba laptop:
  The full screen of the Recovery Wizard is good to hide technical details from users. However, if hang in some components, like the Adobe component I've seen, this will be confusing and advises current defects if the end-user following some in the thread above, legacy because of some missing components and the wrong configuration. It is preferable that the wizard of recovery to exit full screen at a given time, or the wizard handles error scenarios better.

  > So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  Thanks for sharing this with us!

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Portable satellite C660D-151 - failed to open the HARD drive recovery program

  I can't start the recovery program HARD drive on my laptop of Satellite C660D-151 - 1B136799K model number - please can someone help me?

  Thank you

  John Davis

  Hello John

  Recovery installation is very simple and you can do it whenever you want. Important is that your laptop to factory settings. Simply follow the link posted by Feliks.

  If you've changed something else or clean installation of the OS, it will not work and for the installation of recovery you must use the original Toshiba Recovery DVD drive.

  If you have any other questions you are welcome.

• ENVY of HP dv7: copy the file fails error on disk 2 to 58% HP recovery

  My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery with the HP recovery discs I received the last time my hard drive died, I get an error then that 58% on two recovery disc that says:

  Reducer

  Copy the file fails

  From: d:\preload\base24. STORMWATER MANAGEMENT

  To: c:\RM\Image\BASE24. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it does the same thing over and over again. People who questioned him on this same type of error seem to get anywhere here, but what choice do I have? The hard drive is the same size, same manufacturer, same model, it should have the question of reimage the system on a hard drive more small, right?

  Am I just out of luck on that? So frustrated.

  englejas

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on recovery issues and wanted to help.
  
  Here is the link to the tool of creation of win8.1 media: installation media to create for Windows - 8.1 help Windows

  Understand, however, you might encounter a problem installing using the media created from this tool.

  You have a version of OEM HP of Win8 installed on your PC, and this means that the product key that is embedded in the motherboard UEFI firmware is OEM, not retail.

  While the media created from this tool SHOULD be activated using this key, there is no guarantee he will do.  If it is not the case, you can use this tool to recover your product key and try to enter it manually: Download Windows OEM Product Key Tool - MajorGeeks

  IF it still does not work, then your only recourse would be to order a new set of recovery from HP discs.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================

• How do I restore the factory settings without recovery disks

  I'm trying to restore my laptop to its factory settings but I don't have the cd to do it with.
  I have bin told I can do using bios by pressing f8 at the boot screen.

  I did it and taken to system restore settings, but I can't find any option to reset to the factory settings.
  The options I see won't let me restore to factory settings.

  Can anyone help?

  Hello

  When you start your notebook F8 repeatedly press. You enter the Advanced startup options. If you n t change anything on preinstalled HDD (delete the second partition, change the structure or installed other OS partitions), you will see option to fix my computer.

  When you start this option, you enter The System Recovery Options. Last option, there are Toshiba Recovery option.

  When you choose this procedure of recovery option should start and you should just follow the menu on the screen.
  All that s!

• How to set the Satellite A100-596 to factory without Recovery DVD settings

  I gave my young niece of my old laptop A100-596 for Christmas.
  It worked perfectly on Christmas Eve I packed it upward, in packing of origin, but at the time my niece connected on it has lost 40 GB of data among the drives C and E - everything E drive and the dvd drive had stopped working!

  Now, no one has any explanation for what is happening, nor any reason why a laptop that has performed flawlessly for 18 months would suddenly lose 3/4 of the data on it, but whatever!

  So now I want to restore it to factory, but without a job settings dvd, how? I have all disks involved in perfect condition!
  In addition, I want to fool proof so it can be retrieved in case the person or nothing damaged, this time he cannot repeat the action.

  So I think that if I partition the hard drive so that the recovery of files is accessible by me with a password, which I will NOT share with any of the children, if they bumble once again, then I will be able to recover.

  Moreover, even restoring the system files have disappeared, so I can't even it roll back to a working condition!

  Any advice?

  Hello

  You wrote so much and I think it's the best we descuss all questions slowly.

  I don't know what you mean under non-working DVDs. Is the drive defective optical drive or media DVD is not readable?

  Anyway, the fact is that if you want to have the factory again settings you must install operating system using Toshiba DVD recovery. If you don't have it you can do clean OS installation using the Microsoft DVD facilities. All the necessary drivers, tools and utilities are available on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  When you use recovery media Toshiba HARD whole disc will be erased. Absolutely everything. All data and partitions.
  What you want to do with recovering data unfortunately will not work. You cannot copy the recovery image and start it from the other partitions. Not on Satellite A100.

  On new A300, something like this is possible because the recovery image is stored on the second partition in folder HDDRecovery.

  If you have any other questions please let us know.