The FBU GUI Manager caused failed recovery Sys, Bootmgr is missing error

Similar Questions

• Recovery of the FAILED system now BOOTMGR is missing

  Hello

  I have a HP Pavilion DV6-2155dx with win 7 Home premium
  I started having problems with my system and had to retrieve it, but the recovery of the system has failed again and again with the error 0xC0000225. Finally, I found in one of the forums that system recovery partition has not started because somewhere, probably after that I did the new partition, my records have been converted basic dynamic. I had to buy online for $ 30 software back to basic disks, and finally, the recovery partition has been recognized. I chose the option of recovering your system back to the State factory, but after the process started, if failure after only 1% of the process, telling me that the computer cannot be retrieved for the image is missing or something like that, I don't remember the exact message. I said 'ok' and the computer restarted, now I get a MSG "BOOTMGR is missing" using the recovery disk, I tried Chkdsk, but then I realized that the disk is GONE.

  Now, what can I do to access the recovery partition?

  I also try to download an iso of windows 7 that I found a link to here on the forum (to fix the "bootmgr is missing" error) (http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link... but the problem is on the thumbnail activition key below my computer is clearly more and was half-earased.)

  My serial no is [personal information deleted]
  My product is WA781UA #ABA

  Parts of the activation key, that I CAN see is [deleted personal information]

  can you please tell me what was my original activation key, or on the contrary - how can I fix my laptop? I've been around this week! Lose hundreds of hours of work!

  Resolved - I called Microsoft and sent them a photo of the sticker + computer details, and they sent me a new activation key.

• The CC extensions Manager update failed

  Is anyone else having this problem with the extensions update by CC CC Manager? It fails to be updated on all attempts and retry?

  OK guys, I went to the adobe Extension Manager page and download a new copy of the complete product (and not a patch to update), installed, rebooted and it works and is updated to the latest version.

• My PC does not load, I need to do a factory reset, but I can not even enter the Mode without fail because of BOOTMGR is missing. Windows 7

  I'm at the stage where I should be able to load Windows. I don't care if I lose all my files etc.

  I hope someone can get to safe mode or some kind of reset where I can start everything again.

  I use windows 7

  Procedure A:

  Turn on PC

  Wait,

  Motherboard ASUS screen, (ignored)

  Black screen with message: BOOTMGR is missing.   Press Ctrl + Alt + Delete to restart.

  Steps in scenario b:
  Turn on PC,

  There is a screen of ASUS motherboard for less than one second,

  I can press F8 or del to enter this menu.

  That shows a menu, please select boot device:

  -SATA: ST30...

  -SATA: ST31...

  -Access configuration

  Choose any SATA translates BOOTMGR is missing.

  Enter the configuration doesn't have a lot of options and I can't access safe mode.

  So I'm all out of options.

  I want to do a factory reset or similar.  Please help ASAP

  There's probably a way to initialize the factory restore, but it varies depending on the brand.  Let us know the brand of your computer and that we are able to help you.

  On a computer Dell, for example, by pressing F11 at startup Initializes the factory restore.

• Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

  Hi all

  I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

  This is the code:

  Tell application "Mail".

  theMessages set of selection

  Repeat with thisMessage in theMessages

  the value of the theAttachments attached to a letter of thisMessage

  Repeat with thisAttachment in theAttachments

  the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

  Save thisAttachment in file theAttachmentFileName

  end repeat

  end repeat

  tell the end

  
  

  The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

  The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

  Any help would be greatly appreciated.

  Kind regards

  Beem

  If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

  Try

  game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

  on error - file does not exist

  return Beep 3

  end try

  say application "Mail".

  activate

  the value theMessages to the selection

  Repeat with thisMessage in theMessages

  thisMessage Open

  say application 'System events' to say process "Mail".

  click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

  Repeat until sheet 1 window 1 is

  end Repeat

  key sequence "o" using { control down,shift down}

  key sequence "Nutty".

  click on button 'Save' of the sheet 1 of window 1

  Repeat while sheet 1 window 1 is

  end Repeat

  key sequence 'w', using {control down} - close this message

  end say

  end Repeat

  end say

• Failed: Intel management engine Firmware Recovery Agent

  My new Y50 automatically runs a program called "Recovery Firmware Intel Management Agent" engine. This software checks the updates of drivers/firmware. HOWEVER on my machine updates verification FAILS. The error message is: 'we're sorry, but the updates verification could not be completed. Please make sure that your system has Internet access. »

  Has anyone encountered this problem? Can anyone suggest a solution?

  I tried to solve the problem by downloading and installing the latest driver from Lenovo (http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-y-series-laptops/y50-70-touch-n... but that did not help.)

  Thanks for your time

  Y50_user wrote:

  My new Y50 automatically runs a program called "Recovery Firmware Intel Management Agent" engine. This software checks the updates of drivers/firmware. HOWEVER on my machine updates verification FAILS. The error message is: 'we're sorry, but the updates verification could not be completed. Please make sure that your system has Internet access. »

  Has anyone encountered this problem? Can anyone suggest a solution?

  I tried to solve the problem by downloading and installing the latest driver from Lenovo (http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-y-series-laptops/y50-70-touch-n... but that did not help.)

  Thanks for your time

  That's what I've learned about the problem that you have:

  Intel longer supported Intel independent firmware Recovery (IFR) function so that it is advisable to remove the RSI program.

  How to:

  1. go in Control Panel / "Programs and features" using the Windows key + X.

  2 remove the Intel management engine Firmware Recovery Agent

  3 reset

• Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  I did everything to prepare for the upgrade. The Upgrade Advisor says it all right. But I get the message that this network adapter is a problem. It does not appear in device menager even under hidden objects, so I can't uninstall or update.

  It is obviously a problem for more than two years. Why is there not a difficulty now, or at least a well validated response that meets this situation rather than simply repeat the statement to execute the Advisor (done) or update the driver (which is impossible because the card network can not be found)?

  Hello

  You can try these:

  Step 1:

  a. click the Start button.

  (b) in the search box type devmgmt.msc and then press ENTER.

  c. find under the "Mobile Devices" "Microsoft USB Sync" node. If this is not present, proceed to the next step. Otherwise, right click "Microsoft USB Sync" and choose "Uninstall".

  When you connect your USB phone, it should appear in the device under Mobile Device Manager. Education invites you to look out there and if you find Microsoft USB Sync, uninstall it. If she is not there, go to the next step.

  Step 2:

  Disconnect, and then reconnect your device. Your device driver will be re - install and launch Windows Mobile Device Center.

• Recovery Manager cannot restore Presario CQ56 & system does not start, the error BOOTMGR is missing

  1. number and product name

  Compaq Presario CQ56

   

  2 operating system installed (if applicable)

  Windows 7

   

  3. error message (if any)

  in the error log:

  Your hard disk (result-failure) id # UAMBXQ - 5H06AK - XD003F - 618U03 - DISK 1

  Start (result-failure) id # UAMBXQ - 5H60AK - XD003F - 40G 403 MEMORY MODULE 2

   

  4. all changes made to your system until the problem occurred

   

  There is no change made to the computer, before the restoration of what the computer should start, however, it would freeze once the system was running. Restarting the computer didn't help, and when I tried to restore to an earlier point, he stated that it was impossible to complete the restore. I tried the factory reset, however, it gave me an error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer later, it gave an error message: "BOOTMGR is missing, press Ctrl + Alt + Delete to restart» How can I fix it?

  305 error refers to a failing hard drive. You will need to replace the hard drive.

  You can check the status of your warranty here.

  If you do not want to repair the laptop you need to contact HP support. If you are in the United States / Canada you can give them a call at 1-800-474-6836. For other countries you will need to visit this site.

  If you do not want to repair the laptop you I can provide useful information, but I'm going to need your product number. This document contains instructions to find the product number.

  I'll keep an eye out for your answer.

• «Configuration manager Enterprise failed due to the ff...» 11 g/windows 7

  I get this error message when you use DBCA to create a database. Help, please! Study on mine for OCA.
  
  Error message: "the business manager configuration failed due to the following error: listener has not elapsed or database service is not registered with it.» Start the listener and register the service of database and rerun the wizard of Configuration EM. »
  
  I did the following:
  (1) earphone Checked properties service and that the path to the executable file was
  
  DriveLetter:\app\product\11.1.0\db_2\bin\oracle.exeoca11g
  
  I have change the path above for what is indicated below:
  
  DriveLetter:\app\product\11.1.0\db_2\bin\tnslsnr
  
  I've updated: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOCA11gTNSListener
  image file to reflect the change.
  
  I received the suggestion above of a blog. Not sure if it's good or bad, but it seems logical. However, it did not solve my problem
  
  
  (2) I executed the script of the emca in db_home/bin as suggests the warning message in the DBCA Wizard. Restart my PC. Still no luck.
  
  
  (3) I have open DBCA to verify the database (via del) is created, and yes it is.
  I open 'EM and tried to log into the tool as the user Sys/sysdba. I have the username and/or password are invalid error message. URL: https (strike-through) localhost://158/em/console/logon/logon
  I can connect to SQl more as another user sys/sysdba but in EM.

  The command that you use is

  >
  $ cp /media/sf_TEMP/*.zip/home/oracle/media
  >

  As noted above, if you have any experience with Unix, it is a steep learning curve

  HTH
  Srini

• Laptop Presario CQ57: fatal error FAILED, check the HP Connection Manager in Event Viewer

  It takes 15 minutes for my laptop starts and he has this issue when loading.

  It has only been in the last 3 weeks

  

  What can I also solve this problem?

  What are the reasons for this eror occouring?

  Would it not be better to reinstall the hp connection manager or preform a system restore point?

  Use the programs and features to uninstall the application and then reinstall it from the HP Recovery Manager.

  Applications become corrupt like the other files over time.

  Unless you really need to your network and bluetooth connections, there is no need to reinstall.  It is only a request for assistance.

• Recovery Manager restart fails

  Hi all

  I have a problem with my Compaq CQ56-190WM.  I replaced the drive HARD, but don't not before creating recovery USB flash drive.  I booted from the USB and the Recovery Manager came.  OK, so I chose the factory reset and formatted the new and loaded HARD drive recovery files.  After it ended, I was told that it had to restart so I clicked on the laptop continue and then the Recovery Manager came back and that's all.  It is not to start the HARD drive.  I went into the boot options and selected first removed HARD drive Flash drive and go the message "no boot device - insert boot disk and press any key any."  Put the new flash drive and repeat.

  Stuck in a loop cannot exit. Help!

  Hello:

  Sometimes the images of recovery do not work for one reason or another. There are hundreds of messages that are similar in nature.

  Other Purchasing a set of HP recovery disks, if you can read all 25 characters of the product key of W7 on the bottom of your laptop, you can do your own plain W7 installation media to reinstall windows on your new HARD drive.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page60?p=470600&viewfull=1#post470600

• I was just wondering if raising the Task Manager causes a spike in CPU percentage used? What is the normal percentage?

  I was just wondering if raising the Task Manager causes a spike in CPU percentage used? What is the normal percentage?

  Original title: percentage of CPU

  ASJ

  I guess it depends what you mean by 'raising '.  If the Task Manager is running minimized and you maximize there should be virtually no effect.  If you ask any Manager launch tasks can be a brief rally in cpu, memory, and HD activity, but he should be back almost immediately where he was, the slight increase depends on your specifications of the system and other factors.

  Is there a reason you ask?

  

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• The goal of the "VMware-mount Service for Site Recovery Manager" Service?

  Hello

  We experienced a problem return to SAN replication recently after the maintenance of software packages. When we stopped all services SRM replication started. We could then restart RS and everything was fine. One of the services that we had to stop was the "VMware ride Service for Site Recovery Manager. This does not normally work however and the start is set to manual. I made several test stimulus plans last weekend and has never seen work. Anyone know what is this service?

  Thank you

  Mike

  There literally this name...?

  Normally, the Assembly in vCenter service is used by sysprep/deploy process...

  Sysprep is used by SRM as one of the methods for re-IP-ing a VM, I think we can assume the of the same kind of service, but for a different purpose...

  Concerning

  Mike Landry

  RTFM education

  http://www.RTFM-ed.co.UK

  Author of the book of MRS: http://www.lulu.com/content/4343147