The feature does not work after the upgrade of my Lightroom Version 6.4 is installed now my slide show and I am presented with an error message saying "video support is disabled.
It would be good that someone from Adobe has responded to my request
This is a known bug. Just go to the slideshow module and return to the library. The impromptu slideshow should work then.
HAL
Tags: Photoshop Lightroom
Similar Questions
-
My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly. In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
JohnBesides what abdelhak says:
The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.
Hope this helps,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.
I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?
What can I do to get a running Stream 7 tablets?
Hello Aberger,
I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?
If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.
IF you have not done this media, you will need to clean install Windows 8.1 with Bing.
You can not install ordinary Windows 8.1 copy unless you buy a new key.
Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.
During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.
You must contact the HP Support directly to the new copy of the installation media if you do not already have.
Here is the link to contact...
Contact HP worldwide | HP® official site
Let me know if you have any other questions.
-
Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?
Hello
Try the following.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select "Safe Mode with Networking" and press ENTER. When it has loaded, download driver Synaptics following, and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe
Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.
When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.
Kind regards
DP - K
-
line of numbers under the function keys keyboard does not work after windows upgrade
Upgrade from Windows Vista Home Premium 64-bit window Ult 64 bit. Line of keyboard under func keys works not just if online using Windows Explorer, Firefox Safari n - numbers don't work - some type; other type letter k; with the SHIFT key, signs and symbols, type anything. I can get the numbers of t using my keypad and numlock. I have tried 3 keyboards. One was a Microsoft USB 4000 ergonomic keyboard brand new and it had the same problems. My keyboard USB wireless transmitter had the problem too. All have the same problem. The keys are correct by using Word, Wordpad, etc.. Quick test repetition key online as well as the keys were all ok then.
This started happening immediately after I upgraded to windows 7 ultimate. I use a desktop HP Pavilion a6667c with 8 GB of RAM and the latest updates available for windows ultimate. The problem occurred before and after the upgrade to service pack 1. I noticed other people on the web posting on this problem too. I got no error message when using Vista Home Premium 64-bit version and had installed all the latest updates him as well.
The only solution I found to this problem is to build me a small table of characters and symbols, I can't do it, and sticking them in when I am online using one of the three browsers I use most often. I looked at my keyboard settings and changed back and forth between American and British English British without any result.
I'll post my problem of keyboard on HP forums as well. Thanks for any help anyone can give me or leads. Somewhere, I think that it is a simple problem to solve, but I searched and searched and browsed and traveled for several days to find a lot of people who have this type of keyboard problem, but no solution yet.
I was able to solve the problem on my computer Microsoft Vista but uninstalling constant guard I had downloaded and installed with free Norton from Comcast. I got this tip on another thread and after followinging their advice, I was free to use my line of numbers/symbols of the keys even once! I was able to close my copy of the email and the character or symbol and the last sheet in Word.
-
ASM does not work after kernel upgrade
We have recently updated (only updates security - yum update of security) our RHEL 5.6 (Tikanga) + Oracle 11G and ASM.
(1) the first thing we saw him after that restart was this error:
[+[Oracle@hostname ~] $ sqlplus +.
SQL * more: version 11.1.0.7.0 - Production Wed Jul 27 12:57:36 2011
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter the user name: user name
Enter the password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
Process ID: 0
Session IDs: serial number 0: 0
I tried to start it but to no avail:
[+[Oracle@hostname ~] $ sqlplus / as sysdba.
SQL * more: version 11.1.0.7.0 - Production Wed Jul 27 15:47:06 2011
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connect to an instance is idle.
SQL > Select * from v$ instance;
Select * from v$ instance
*+
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
SQL > the judgment
ORACLE instance stops.
SQL > startup nomount
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file ' DG1/ourdb/ourdb.ora'+
ORA-17503: ksfdopn:2 could not open the file DG1/ourdb/ourdb.ora+
ORA-15077: could not locate instance ASM serving a required diskgroup
SQL > alter database mounting
+ 2 +
SQL > alter the editing of the database;
change the database editing
*+
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Then we checked ASM:
[+[root@hostname ~] # /etc/init.d/oracleasm listdisks +.
[+[root@hostname ~] #+.
that didn't work because the "oracleasm" kernel module has not been loaded.
[+[root@hostname ~] # lsmod | grep oracleasm +.
[+[root@hostname ~] #+.
This is most likely due to the recent update of the kernel
Of
+ 2.6.18 - 238.5.1.el5 +.
TO
+ 2.6.18 - 274.el5 +.
I think that modules of Oracle for some particular kernel versions and our version is not supported:
[+[root@hostname ~] # oracleasm update-driver +.
Kernel: 2.6.18 - 274.el5 x86_64
Driver name: oracleasm - 2.6.18 - 274.el5
There is no driver for kernel 2.6.18 - 274.el5
[+[root@hostname ~] #+.
Y at - it a script that can generate for our version of the kernel module (something similar like vmware offer)? Or put the oracleasm pilot is the only way?
We have workaround copy old kernel module to new kernel directory:
[+[root@hostname ~] #cp /lib/modules/2.6.18-238.5.1.el5/kernel/drivers/addon/oracleasm/oracleasm.ko /lib/modules/2.6.18-274.el5/kernel/drivers/addon/oracleasm/+
[+[root@hostname ~] #+.
and charge of this module in memory:
[+[root@hostname ~] # insmod /lib/modules/2.6.18-274.el5/kernel/drivers/addon/oracleasm/oracleasm.ko+
[+[root@hostname ~] # lsmod | grep oracleasm +.
oracleasm 84136 0
[+[root@hostname ~] #+.
and then the ASM began to display the disks:
[+[root@hostname ~] # /etc/init.d/oracleasm status.
Check if the DSO is responsible: Yes
Check if/dev/oracleasm is mounted: no
[+[root@hostname ~] # /etc/init.d/oracleasm stop +.
+ Deletion of Oracle ASMLib discs: [OK] +.
+ Stop the Oracle ASMLib driver: [FAILURE] +.
[+[root@hostname ~] # /etc/init.d/oracleasm start +.
+ The Oracle ASMLib driver initialization: [OK] +.
+ Analysis of the system for Oracle ASMLib discs: [OK] +.
[+[root@hostname ~] # /etc/init.d/oracleasm listdisks +.
ASM01
ASM02
[+[root@hostname ~] #+.
All this is perfect until you restart. How do I load this module oracleasm automatically?
(2) then we tried to boot from the previous version of the kernel "2.6.18 - 238.5.1.el5. ASM works very well here and the 'oracleasm' module is loaded automatically after reboot.
However we are still facing in the original question in the beginning:
[+[Oracle@hostname ~] $ sqlplus +.
SQL * more: version 11.1.0.7.0 - Production Wed Jul 27 12:57:36 2011
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter the user name: user name
Enter the password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
Process ID: 0
Session IDs: serial number 0: 0
It was working fine before. How to fix with old or new core please?
Thank you
Published by: 872550 on July 28, 2011 01:39872550 wrote:
We have recently updated (only updates security - yum update of security) our RHEL 5.6 (Tikanga) + Oracle 11G and ASM.It was working fine before. How to fix with old or new core please?
Thank youHello
Try to download and install this oracleasm
http://OSS.Oracle.com/projects/oracleasm/dist/files/rpms/RHEL5/AMD64/2.0.5/2.6.18-274.EL5/oracleasm-2.6.18-274.EL5-2.0.5-1.EL5.x86_64.rpmSee you soon
-
My system restore feature does not work after recovering from a virus
I recently had a virus and I had removed it by my anti-virus provider technicians. I had to boot mode safe several times and now I have found the system restore gives me the message "system restore has been disabled by group policy. To turn on system restore, contact your domain administrator.
I am the administrator on my computer and the only user, and when I try to turn the system restore in system properties is not there! Any help would be appreciated. I use Win XP Pro SP3 pre-installed on a Compaq.
Robert
I read the reply joelj1964 gave fixmycomp on do start, run and type GPEDIT. MSC, but when I got to the system has no system restore. Probably the virus removed?
Robert
I fixed the problem thanks to what joelj1964 says "fixmycomp". I managed to find the restoration of the system configuration in the system [at the beginning I was looking in the wrong folder] and I tweaked between off, on and off the restoration and system configuration disabled, enabled, and disabled and after some trial and error [they are two people with disabilities now] and restart 2 - 3 times the system restore worked and now I can do the restore points.
We want to joelj1964 for its indirect support.
Robert
-
autorotation does not work after update 8, 1 wind - W510
I have a tablet with docking station and 32 GB w510
the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.
I ve installed the latest driver form acer download page and Windows update.
then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.
What can I do?
PS the camera does not work
-solution for me! ----
I don't know what happened, but I'll tell you what I did not last:
I have the European version of Windows 8.1 N(without Media Feature Pack)
- reinstalled microsoft silverlight.
- search for update---> silverlight update available!---> installed!
- reset
- installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
- reset
- Search again---> new available updates updates---> installed
- reset!
now, camera, autorotation and all the apps work for me. I hope this will help you
Best regards
-
On my trackpad scrolling does not work after the upgrade to 12.0
On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.
Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.
Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably. -
screen capture on the iphone 6 does not work after 9.2.1 upgrade
screen capture on the iphone 6 does not work after 9.2.1 upgrade
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Try to do a screenshot, once more.
-
The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store
Welcome to the Apple community.
After returning, I'm not really clear on what your question.
-
My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10. Is there a fix for this yet?
I thought about it. The upgrade to Windows apparently damaged 10 HP SimplePass software. Once I uninstalled and reloaded the program, everything started working.
-
After you have installed Windows 7 Home premium, I noticed that the aero peek feature does not systematically after a fresh reboot upward. Sometimes when I turn on my computer the aero peek feature turns on immediately and works well. On other occasions when I turn it on it just does not come to the top. I had the box customize and found the checked enable aero peek. Still aero peek doesn't work. So to summarize if aero peek turns on it works fine. However, it does not illuminate whenever I boot my machine eventhough that the box is checked. Please notify.
Try this: launch REGEDIT, navigate to HKEY_CURRENT_USER and make sure that EnableAeroPeek is set to 1, rather than 0.
It can help. -
The scheduled scan output of McAfee does not work after update to W - s7
Hello.After upgrade to W - s7 scan-out expected of McAfee Total Protection 2010, a license does not work on Toshiba Upgrades.Support McAfee program not able to help, worked 3 hours and sent in support - Russian? for us, it is not present. Perhaps who fell on a problem as well. I'll owe for any information. Thank you
>... does not work on Toshiba upgrade program
What program does? AFAIK the upgrade Toshiba travels TEMPRO.
We think the same? -
Why the highlighting of text in a PDF document does not work after you save the file
Why the highlighting of text in a PDF document does not work after you save the file
What application you use to highlight?
Maybe you are looking for
-
Noice fan after the installation of SSDS
Just upgraded my Mac Mini LAte 2009 with 2 GB of Ram and changed the slow HARD drive to an SSD. After the upgrade and installation of the SSD in Cabinet, the fan runs all the time making a lot of noise. Someone had this problem? What may and how to f
-
can someone tell me how to run my iTunes after a deaf mute DEP (Data Execution Prevention) installed in my computer? Seriously, he's blocking the iTunes... for the love of God!
-
Get the message: to check updates. You must first install an update for Windows Update.
I try to install this new version, but it won't work. I desperately need help. My windows update said I have never checked the updates. What is going on?
-
For about two weeks screen installation 18 Windows updates at the stop.
For about two weeks when I shut down Windows 7, I get the message that Windows installs updates 18; do not to stop the computer. The screen shows that each update is installed and the computer then goes to the closure program. Installation time is
-
I have two email addy on Outlook Express 6.0 that have worked well for years. Now for the past 2 weeks, I can only receive mail among the addy. I can not send and get the error: "The connection to the server failed. "Account: 'mail.bellspalsy.ws',