The Windows module installer has stopped working; I've tried patches offered by microsoft, without success...

Similar Questions

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• Process host and Windows Modules Installer has stopped working and was closed!

  Hello

  Some error messages I get are "host process for Windows Services stopped working and was closed" and "Windows Modules install Stopped Working and was closed."

  It didn't happen until three weeks ago, when I did a system restore.

  I searched the internet for a while now and can't find anything.

  Thanks I hope you can help,

  Michael

  Hi Michael2017,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to install updates on the computer?

  Windows Module installation service are the two basic services responsible for all your updates installed correctly. Windows Module Installer service enables installation, modification, and removal of Windows updates and optional components. If the Windows Installer of Module service is disabled, install or uninstall windows updates may fail.

  Check and make sure the installation Module of Windows service is running on the computer

  (a) click Start; in the start search type services.msc and press ENTER.

  (b) ensure that the installation of Module Windows Service is running and the startup type must be handwritten.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• "The Windows Task Manager has stopped working" the INSTANT Task Manager opens... process of safe mode does nothing.

  I am running windows 7 64 bit and have encountered a problem. Whenever I have open tasks, any way Manager (msconfig, cntrl shift escape, Ctrl alt del, etc.), task manager opens and white and displays "Windows Task Manager has stopped working". I am increasingly frustrated with the problem. I tried booting in safe mode AND clean boot, but the problem persists. On top of that, the system restore fails whenever I'm trying to do.

  Could you please help me get running again the Task Manager?

  Do you feel the behavior if you log on with a different user account?

  Maybe, try to rename a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager to for example a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager.OLD in the registry. Then try to start the Task Manager again.

• Cannot install Windows PLUS updates. -Modules Windows Installer has stopped working...

  original title: cannot install MORE Windows updates.

  Greetings, people. My computer will download, but not install many of the windows updated.

  I think it's because of 'message "Windows Modules Installer has stopped working and was closed". Is this correct?

  Can I fix it myself? Thank you, Bob

  Hello

  try looking here's FixIt pro windows update:

  http://support.Microsoft.com/kb/971058/en

  LC

• Windows Installer has stopped working and access is denied installation KB942288-V3

  original title: Windows XP SP3 installation problem

  My windows installer has stopped working. I tried several 'fixed' found on the net, but nothing is done and would be grateful if someone could guide me through the solution.   Windows XP, SP3.

  In 'Services', 'Windows Installer' has been designated 'disabled '.   I changed this "manual".

  msiexec /unreg works ok.
  msiexec/regserver gives an error: "an event could not invoke any of the Subscriber.

  I have downlaoded and ran KB942288-V3 and got ' Setup error.   Access is denied. "

  I watched the permissions in the registry and seems to have all the permissions are ok, but maybe I'm looking in the wrong place?

  Thanks for any help

  Hello Kaiser,

  I would say that if you update your PC from SP2 to SP3 all your files will remain same.

  Once you do a new Installation or a custom don't store all your network cards and other device drivers.

• When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working.

  When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems?  Thank you

  Original title: frustrated in New York

  The problem seems to be the igdumd64.dll:

  Fault Module name: igdumd64.dll
  Fault Module Version: 8.15.10.1749
  Timestamp of Module error: 4a5bdf54

  The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.

  You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:

  http://www.Intel.com/p/en_US/support/detect

• Attention, windows media player has stopped working.

  Hello

  I still get the pop up that the windows media player has stopped working, to check the updates, etc nothing works! (vista 32) Examine the error log shows "flaws mcm2ve.ax module, version 7.3.0.16928. Any help would be most appreciated.

  Hello

  I still get the pop up that the windows media player has stopped working, to check the updates, etc nothing works! (vista 32) Examine the error log shows "flaws mcm2ve.ax module, version 7.3.0.16928. Any help would be most appreciated.

  Hey bellais

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If that does not fix it repost in the Sub forum

  Manage your photos and videos: play, burn, import and more with Windows Media Center, Media Player, or other programs.

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  Walter, the time zone traveller

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows live mail has stopped working properly. Can view the Inbox but not send e-mail messages. Send a message: problem with page caused either to stop working.

  My windows live mail has stopped working correctly: I can view my Inbox but not send emails, because a box appears and indicates a problem with this caused page internet explore to stop working. This seems to be connected to the other problem I have with windows live messenger, who says his side by side configuration is incorrect.

  I uninstalled windows live essentials and reinstalled it but still the same result. Have also installed all updates via the windows installer.

  I am close to throw the computer because the problem seems irreparable: HELP!

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha