The Finder crashes repeatedly after a start-up of the machine of time :/

Similar Questions

• Time machine automatically upwards a WD passport when its plugged into the machine of time rather than the macbook?

  Hello

  I have a Macbook Pro with a WD passport for mac that I keep all my photos on.  I know that time machine will back up there if I plug it into the mac and select it to be excluded from the United Nations through the time machine preferences, which I did, but I generally keep the Passport plugged into the time machine itself and use wireless.

  However, I don't really know if time machine is it backs up this way, or if it's just a wireless router that allows me to access the Passport.

  How will I know if it is saved?  And if not, how can I save it while it is plugged into the time machine?

  Unfortunately, it seems as if you are confused about the terms of Time Machine and Time Capsule.

  Time Machine is a software on your Mac, which is used to back up your Mac hard disk... like a Time Capsule

  A Time Capsule is material... more precisely a wireless router with a built-in hard drive that can be used to store backups Time Machine .

  With this information in mind, can clarify you what it is you want to do?

• Fusion 8: start time of 10-20 minutes, they will all right to a failure of windows 7 (xp crashes quickly after VM starts too)

  I just spent about 30-40 hours wth your telephone support team trying to get rid of this problem. 

  Who has been VMware support request 15768735609 [ref: _00D409hQR._50034lEhj0:ref]

  They were extremely conscientious, but after a month or two to help, had to interrupt to return my calls and close the service request when it appeared that I don't have unlimited time to get a non-working system work if they had no idea of what was the problem - I think they have finally given up on me after on the 83rd time they checked the memory use , turning off hardware acceleration, etc and generally ran out of ideas.  I tried to ask if it is really true that 8 does not work with windows and that I must get 6.02 and they refused him.

  
  

  Does anyone know if there is a solution to the problem please?

  
  

  I tried upgrading the virtual machine 7 to 10,--laboriously half a dozen times.   But windows does not seem to be able to perform the normal upgrade (three of a kind, USB backup or .iso) an operating system in a virtual machine.

  
  

  Curiously, Linux (I used Zorin both travel) seems to work very well
  

  
  

  .

  I saw your post yesterday. To be honest, there was not much information about the problem. Most of the people in this forum is ordinary VMware users like you, so that we cannot read or see the request for assistance you listed. That is why I think even you answer, and I guess that's the reason for which everyone left alone, too.

  VMware Fusion 8 is not free of errors, but I'm running multiple instances of Windows 7, Windows XP and Windows 2008 R2 Server with no start-up or significant performance problems. I have never seen anything that it is close to what you describe, and I suspect that there are many other users of VMware Fusion, which is reasonably satisfied with their machines virtual Windows 7 as well.

  Devoid of any useful information, other than your description of how long have you worked with VMware support without success, here are my thoughts and my questions:

  • Is a virtual machine for Windows 7 existing which worked and then failed after an update or upgrade of a certain type?
    • Update/upgrade to VMware Fusion?
    • Windows Update?
  • You can try a new installation of Windows to see if it fails in the same way?
    • (You can download a copy of the file .iso Windows install Microsoft.) You can run it briefly without activation, just to see if it works.)
  • The problem could have a certain type of damaged files or any other problem with Mac OS?
    • You can copy your virtual machine to another Mac running VMware Fusion to see if she has the same symptoms?
      • That would help you determine if the problem is your Mac or the virtual machine itself?

  Maybe you have already done a lot of the above, but I don't know. It might help to provide a more detailed description, including what you tried. Nothing but the facts. We already get it that you are not happy with the VMware Fusion product and related support.

• 10 Safari does not open or crashes repeatedly after opening

  On a new installation of Sierra Safari BLOCKED seconds from the inside of the opening.

  When com.apple.safari and Safari Library files are removed and deleted 10 Safari opens but fails in the minute.

  The question seems to have NOTHING to DO WITH THE CONTENT of the USER. So there must be another underlying problem with the Safari Application itself. It is a question of police an Office of Java or something else, Apple should address this in its BETA version.

  In addition, Apple should have a presence on their website with information about this problem.

  Understand that there is a USER forum, I really don't need to hear any comment of some super user on this fact. But, as users, we should demand more responsibility when it come to basic applications and services required for the system to function properly and for a basic browser function without these problems.

  Written on the Apple Forum in Mozilla Firefox.

  Have you tried Safari extensions and third-party plug-ins for troubleshooting?

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

• Zero bytes available - Finder crashing - Apps does not

  I went back to work for a month of paternity leave, and my iMac (which has only a few months) is completely on the fritz. He was running very slowly, taking an hour just to start. Applications such as Illustrator took thirty minutes to open. Mail will not open.

  Then I watched as storage available ticked down a few Go to zero. I deleted several GB of files, and whenever I restart finder says I have zero bytes available. I've worked on this all week, and all of a sudden this morning nothing I have delete appears in the trash, so I can't empty the trash.

  In addition to this, Finder crashes repeatedly, several panels of preferences system does not open and I can't connect to the network in my office. I scanned for a virus, but everything seems to be clean.

  You need to reinstall OS X from scratch. I'm afraid to erase the disc. I hope that you have a current backup.

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer after the ring, press in and hold the ORDER et R keys until the menu screen to appear.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. when the recovery menu appears, select disk utility and press the continue button.

  3 disk utility loads and select Macintosh HD indented from the left entry

  list.  Click on the Erase tab in the toolbar... Set the Type of Format Mac OS extended,

  ournaled in the menu dropdown. Click the clear button. Wait for the operation

  ends, then quit disk utility and return to the main menu.

  4. reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Finder crashing on macOS Sierra

  I have a late 2009 iMac Core2 3.33 GHz, 8 GB RAM processor. After the installation of macOS Sierra, Finder crashes constantly on me. I have to restart about five times a day.

  • Get beach balls when you click on an external drive or a folder.
  • Get beach balls when you use folders and files on my computer with Mac (for example logic) applications or web applications.
  • When the Finder crashes, I can't start it again.
  • When the Finder crashes and I try to stop or restart, my screen freezes and the system is not finished closing down or restart (I have to press my power button / as a strong downwards).
  • I tried already to re-setup of Sierra.
  • I already cleaned my folder of application of system of 'tricks' old, unused library support.
  • All of a sudden, Pages, Numbers, Keynote, iPhoto and iMovie has started to download and install on my iMac - it was very strange. I had already installed the new versions of the Pages, Numbers and Keynote, before Sierra was deployed. In addition, I see no updates in the App Store that relate to this spontaneous download.
  • Projector has also crashed on me recently during a search.
  • I read that Google Drive and dictation can cause this, but I don't have to be installed/activated.

  I will continue to add to this newspaper that I find new things that cause my iMac to hang / crash.

  If anyone has any advice, or was able to solve this, please reply to this message.

  Download and run Etrecheck to go to https://etrecheck.com/ and paste the results here.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Problems with InDesign CC 2015 and El Capitan DP7? With DP6 is was awesome, with DP7 crashes just after the start.

  Hello!

  Updated El Capitan DP7 this morning and InDesign crashes just after the start. (With DP6 is was great)!

  Any comment/suggestion/help?

  Process: Adobe InDesign CC 2015 [1409]

  Path: / Applications/Adobe InDesign 2015/Adobe InDesign 2015.app/Contents/MacOS/Adobe InDesign 2015 CC CC CC

  ID: com.adobe.InDesign

  Version: 11.1.0.122 (11100)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe InDesign CC 2015 [1409]

  User ID: 501

  Date/time: 18:32:41.676 2015-08-21 + 0200

  OS version: Mac OS X 10.11 (15A263e)

  Report Version: 11

  Anonymous UUID: 0061129A-F597-5AFB-7DF4-CF3E3B3FDDA2

  Time since started awake: 5800 seconds

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000040

  Note the exception: EXC_CORPSE_NOTIFY

  VM regions near 0x40:

  ->

  000000010aff9000-000000010affe000 [20 K] __TEXT r-x/rwx SM = COW/Applications/Adobe InDesign CC 2015 / Adobe InDesign CC 2015.app/Contents/MacOS/Adobe InDesign CC 2015

  Global tracking buffer (second chronological reverse):

  3.729044 CFNetwork 0x00007fff8b5b9a9b TCP 0x7fb494e71f80 SSL Handshake Conn MADE

  3.975525 SSL handshake at the start of CFNetwork 0x00007fff8b5b9977 TCP Conn 0x7fb494e71f80

  3.975626 all 0x00007fff8b5b821f TCP Conn 0x7fb494e71f80 CFNetwork. FD: 60, err: 0

  3.976001 event TCP Conn 0x7fb494e71f80 CFNetwork 0x00007fff8b5b77d1 1. Err: 0

  4.138228 CFNetwork TCP Conn 0x7fb494e71f80 0x00007fff8b5b6faf started

  9.259148 CFNetwork 0x00007fff8b5b9a9b TCP 0x7fb48d5d0f00 SSL Handshake Conn MADE

  This fixed it for me:

  
  

  Solved: Disabled the auto-hide the menu bar.

  
  

  InDesign crashing on the opening (using the beta OS El Capitan 10.11)

• Why my games crash immediately after clicking on the icon?

  original title: After double clicking on the icon of the game, the problem windows window appears and says it checks for a solution.  I can't understand how to solve this problem.  It does not occur on all games.

  Why my games crash immediately after clicking on the icon?

  Hello
   
   
   
  1. what game you play when this happens?
  2. have you ever run properly on your computer?
  3 did you changes to the computer recently?
   
  
  Method 1.
  Play this game in the clean boot and then check if it works very well.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
   
  Method 2.
  I would like to look at the logs of the same observer. Here's how you can pull up the newspapers:
  Type eventvwr.msc/s in the address bar.
   
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The purpose of doing a virus scan after Windows starts in safe mode?

  I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

  (1) would what type of circumstances you perform a scan antivirus in safe mode?

  (2) what are the advantages or disadvantages?

  I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

  Thank you!

  Hello

  The advantage is that some process and services are not loaded in Mode without failure there is less chance
  This malware can load and interfere with the process. The downside is the same if its best
  to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
  difficult to remove malware is detected then run in Mode safe, then in Windows.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Finder crash after 10.11.4 upgrade to 10.11.5

  Hello

  I am facing a big problem...

  I've just updated my 10.11.4 to 10.11.5 OSX and now keep Finder crash every time.

  I also tried to test a different user account, as well as the guest account to be sure of the environment.

  Any idea who solve? Thank you.

  Below the crash log (or link pastebin: http://pastebin.com/VVT0wU8H):

  Process: Finder [932]

  Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  ID: Finder

  Version: 10.11.4 (10.11.4)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible: Finder [932]

  User ID: 501

  Path of the PlugIn: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  The identifier for the PlugIn: QLEnableXRayFolders

  Version of the PlugIn: 10.11.4 (10.11.4)

  Date/time: 2016-05-20 00:28:37.177 + 0200

  OS version: Mac OS X 10.11.5 (15F34)

  Report Version: 11

  Anonymous UUID: 159184C2-8FCF-73D3-30E7-2A1517CCF942

  Time since started awake: 500 seconds

  Integrity of system protection: enabled

  Crashed thread: 0

  Exception type: EXC_BAD_ACCESS (Code invalid Signature)

  Exception codes: 0 x 0000000000000032, 0 x 0000000106175000

  Note the exception: EXC_CORPSE_NOTIFY

  kernel messages:

  -0-sec CODE SIGNING: cs_invalid_page (0 x 106175000): p = 932 final status [Finder] 0x3004a00, denying page sending SIGKILL

  -0 sec CODE SIGNING: process 932 [Finder]: rejection page not valid at address 0 x 106175000 offset 0 x 650000 in the file ' / System/Library/CoreServices/Finder.app/Contents/MacOS/Finder ' (cs_mtime:1462428792.0 == mtime:1462428792.0) (signed: 1 valid: 1 tainted: 1 wpmapped:0 slipped: 0)

  SEC-1 CODE SIGNING: cs_invalid_page (0x10272c000): p = 931 final status [Finder] 0x3004a00, denying page sending SIGKILL

  SEC-1 CODE SIGNING: treat 931 [Finder]: rejection of invalid page at 0x10272c000 offset 0 x 650000 in the file ' / System/Library/CoreServices/Finder.app/Contents/MacOS/Finder ' (cs_mtime:1462428792.0 == mtime:1462428792.0) (signed: 1 valid: 1 tainted: 1 wpmapped:0 slipped: 0)

  s-2 CODE SIGNING: cs_invalid_page (0x1072e9000): p = 930 final status [Finder] 0x3004a00, denying page sending SIGKILL

  dry-2 CODE SIGNING: treat 930 [Finder]: rejection of invalid page at 0x1072e9000 offset 0 x 650000 in the file ' / System/Library/CoreServices/Finder.app/Contents/MacOS/Finder ' (cs_mtime:1462428792.0 == mtime:1462428792.0) (signed: 1 valid: 1 tainted: 1 wpmapped:0 slipped: 0)

  s-3 CODE SIGNING: cs_invalid_page (0 x 103856000): p = 928 final status [Finder] 0x3004a00, denying page sending SIGKILL

  Sec-3 CODE SIGNING: treat 928 [Finder]: rejection of page not valid at address 0 x 103856000 offset 0 x 650000 in the file ' / System/Library/CoreServices/Finder.app/Contents/MacOS/Finder ' (cs_mtime:1462428792.0 == mtime:1462428792.0) (signed: 1 valid: tainted 1: 1 wpmapped:0 slipped: 0)

  s-4 CODE SIGNING: cs_invalid_page (0x10fd21000): p = 927 final status [Finder] 0x3004a00, denying page sending SIGKILL

  SEC-4 CODE SIGNING: treat 927 [Finder]: rejection of invalid page at 0x10fd21000 offset 0 x 650000 in the file ' / System/Library/CoreServices/Finder.app/Contents/MacOS/Finder ' (cs_mtime:1462428792.0 == mtime:1462428792.0) (signed: 1 valid: 1 tainted: 1 wpmapped:0 slipped: 0)

  VM regions near 0 x 106175000:

  __DATA 000000010615 000 d - 0000000106168000 [44K] rw-/ rwx SM = NO /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  -> __LINKEDIT 0000000106168000 - 00000001061 a 9000 [260 K] r-/ rwx SM = COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  __LINKEDIT 00000001061a 9000 - 00000001061b 6000 [52K] r-/ rwx SM = NO /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  Thread 0 crashed:

  dyld 0 0x00007fff6a750d80 ImageLoaderMachOCompressed::eachBind (ImageLoader::LinkContext const &, unsigned long (ImageLoaderMachOCompressed: *) (ImageLoader::LinkContext const &, unsigned long, unsigned char, char const *, unsigned char, long, long, char const *, ImageLoaderMachOCompressed::LastLookup *, Boolean)) + 208

  1 dyld 0x00007fff6a750c2f ImageLoaderMachOCompressed::doBind (ImageLoader::LinkContext const &, bool) + 63

  2 dyld 0x00007fff6a7470de ImageLoader::recursiveBind (ImageLoader::LinkContext const &, bool, bool) + 168

  3 dyld 0x00007fff6a7467bc ImageLoader::link (ImageLoader::LinkContext const &, bool, bool, bool, const ImageLoader::RPathChain &) + 184

  4 0x00007fff6a73ca12 dyld::link dyld (ImageLoader *, bool, bool, const ImageLoader::RPathChain &) + 149

  5 dyld 0x00007fff6a73dbe4 dyld::_main (macho_header const *, unsigned long, int, const char *, const char *, const char *, unsigned long *) + 3160

  6 dyld 0x00007fff6a739276 dyldbootstrap::start (macho_header const *, int, char * const, long, macho_header const *, unsigned long *) + 512

  dyld 7 0x00007fff6a739036 _dyld_start + 54

  Thread 0 crashed with X 86 State of Thread (64-bit):

  Rax: 0x00007fff9c0464ca rbx: 0000000106175000 rcx 0 x: 0x00007fff9c0464ca rdx: 0x000000010607a5a0

  RDI: 0x00007fff6a7785f8 rsi: 0 x 0000000000000001 PBR: RER 0x00007fff5a0e4a10: 0x00007fff5a0e4920

  R8: r9 0x000000010607a5a8: 0 x 0000000000000000 r10: 0x0000000106174fd0 r11: 0 x 0000000000000028

  R12: 0x0000000106175ba8 r13: 0 x 0000000106175000 r14: 0000000106175000 r15 x 0: 0 x 0000000000000000

  RIP: 0x00007fff6a750d80 rfl: 0 x 0000000000010293 cr2: 0 x 0000000106175000

  Logical CPU: 2

  Error code: 0 x 00000004

  Trap number: 14

  Try to boot into boot mode safe to hold the SHIFT key.  SafeBoot http://support.apple.com/kb/HT1564

  From there, download and install updated combo

  Download update of OS X El Capitan 10.11.5 Combo

• Skype crash just after the connection

  Hello

  Skype crashes just after that I have sign inn approximately 2 sec after a few times too 10 sec until it started a day and a half...

  doesn't look as if it was a local problem, since I can't sign inn on any pc or phone spit just after 1-2 sec

  even if I connect to a pc that has a different uses that inn works recorded, whne I try to connect inn I've kicked 1-2 sec after

  tried to fix most of them, but nothing helps...

  Fixed a problem...

  Just disable the microsoft account and it works again

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Crashing immediately after starting

  Hello

  My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

  Follow these steps to exclude material failures.
   
  Type of memory in the start search box, and choose Diagnostic memory. This will
  take a few minutes.
   
  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
  --
  ..
  --
  "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
  > Hello,
  >
  > My computer crashes immediately after start upward. Sometimes, I had the chance
  > actually click on anything, but more often it just freeze before
  > I can do anything. I'm running it in safe mode now and it works
  > quite well. Any ideas on what I can do?
  >