connect to new computer at home
I buy a new House Pavillion wireless computer and want to connect my HP officejet 6600 printer, fax, scanner... to my ew computer. How?
Large. Here is your complete support page.
Here is your User Guide, installation instructions, recommended software complete and drivers, troubleshooting. Have fun.
Tags: HP Printers
Similar Questions
-
How can IP address - I connect to my computer at home?
Original title: ip address
Hello!!
I have a few questions.
I have read in many forums that computers running Windows have two ip addresses: internal and external.
first of all, I don't know the difference between them.
Then, suppose I want to connect my computer remotely. What ip address to use? It is ip has see when I execute the command ipconfig at the prompt of commands, or ip, I find when visiting ipaddress.com? I ask this question because I saw that look for it in the ipaddress.com of ip address changes each time I connect to my router.
the ip address I can find in the command line changes (ipconfig command). also, many router gives the same ip address to the computer connected to its network. I say this because I have a friend who uses the router as mine, and we sometimes have the same (192.168.xxx.xxx) ip address.
How can I connect to my computer at home whenever I need if the ip address of the Exchange computer? Otherwise, I have to check the ip address before you leave the House.
How can I connect to my computer at home by its name if the two computers can have the same name?
I noticed that there are too many question, but whatever the answer, I'll be satisfied.
YO
1-devices on your local network have internal IP addresses. Your router/modem translates them your external IP who sees the rest of the world. Your internal IP address is usually something like 192.168.0.1 etc..
2. it depends on how you want to connect remotely but you always use the external IP address. whatismyip.com will tell you what it is.
Your ISP assigns the external IP and the most dynamically assign (which means that they can change)
There is a really easy (and free) way to connect to your computer remotely, eliminating the need for you to deal with the IPS called Team viewer. It is here http://www.teamviewer.com/en/index.aspx
You simply install viewer of the team on both computers.
-
How to connect a new computer to win 8 to an existing home network
I currently have several computers in the House (3 win 7 and 1 vista) and different multimedia devices connected wireless and wired to a home network (not a homegroup because vista and media devices). I don't see the new computer network. Especially I can't find the instructions of where to start. Very frustrated and thinking of sending the new machine back.
I think, for the PC, it will have to make sure that it is on the same WORKING group as the others (by assigning the same way you would in Windows Vista or 7). Bring up Windows Explorer if you can right click on COMPUTER, then properties and you will have access to rename the computer or change the group work. If you have sharing turned on, you should be able to map drives to any actions you have intended. I have a Windows 2003 domain home since I am running, among others, two Web sites and my own mail server. WIN8 Pro does not support areas, but easily supports working groups. I am able to see everything that I need my network at this point.
What types of devices you also connect to?
-
implementation of Cisco Connect on new computer
Hello
I just got a new computer and I'm trying to set up Cisco Connect on the new machine, I'll retire the old machine shortly.
When I try to install, it tells me that he wants to start configuring my router.
My router is already set up exactly like I want, and I fear that if I continue the installation, it will be clear my current setup and configure the router with the default settings.
Is it possible to just install the Connect application without changing my current setup?
Thank you
Ed
I did that and Yes just continue with installation that it not to delete my current config on the router. Your good to go...
-
I am unable to connect to new computer does not recognize one of my email addresses
Computer died this morning, another bought, downloaded Firefox, but can not get on my old account with my bookmarks, etc... tried all 3 of my email addresses, no luck.
Hi Tucsonjj,
Please try to avoid sharing any personally identifiable information in a public forum, the information could fall into the wrong hands.
There are two things that can be done, but first please understand that Firefox sync is not a reliable source of a return for Firefox profiles.
If there is another device, that the account of Firefox has been connected, make a backup of this profile. Backup and restore Firefox profiles information
If it isn't, I'm sorry, unless you have access to the profile of the previous computer file, is not a return to the top.
-
I bought the creative cloud on work computer, how to connect on the computer at home. I installed it, but it is still saying 30 day free trial.
Hello
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
I have a HP ENVY laptop new - 13D-d000 CTO (ENERGY STAR).
Product name N8R87AV
Windows Pro 10
64 bit
Network adapter: Intel Dual Band Wireless-AC 7265
When I click on the wireless icon - it shows me the connection within the home. I connect and it says it is the network configuration required, but then it crashes. I try again later and it does not find the connection at all. Other devices in the House are connected, so I know that the real wireless works.
I called HP Tech Support, they tell me it's a matter of Internet provider, I call AT & T and they say it's a problem of HP. I call HP Technical Support and they always say it is a problem of ATT and I have to tell them to configure the settings. I call ATT and they cannot diagnose and insist that it is a problem of HP. I'm not at a loss.
I hope to find a solution, it seems that networking with HP wireless seems to be ongoing question. Thanks in advance for your help.
Consult and follow the suggestions in the Document troubleshooting:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
Comment
It is possible, depending on when your new computer was actually produced and implemented for Windows 10, that the Intel Wireless LAN Driver should be updated - or at least reinstalled.
Drivers (Windows 10) HP ENVY laptop - 13D-d000 CTO (ENERGY STAR):
=====================================================================
Update the BIOS
Also listed in the section of the conductors: update of the BIOS. Note that the BIOS updates are an inherent risk; It is strongly recommended that only update you your BIOS when necessary (ie., to correct a problem) and only after that you have completely backed up system - which includes all critical files be available either on the cloud or backed up to an external drive where you can access it.
Version: Rev.A e.16
Windows key + R (open the Run command) > type msinfo32
Opens the Information System
Under System summary > to the right of the Version of the BIOS/Date search
--------------------------------------------------------------------------------
A bit dated; always topical:
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.
Mike4D
Hello
You can choose one of the following 2 options:
Option 1: simila in the image above
Connect the printer to the router,
Connect a PC to the router (not wireless computer)
Option 2:
Connect a PC to the router (not wireless computer)
Connect the printer to the wireless router
Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.
Please use the following book to configure things
http://h10032.www1.HP.com/CTG/manual/c00389927.PDF
Kind regards.
-
I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!
original title: help!If you have no Windows CD, you can not do a repair installation.
If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.
If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).
Wouldn't you want some ideas that actually work?
The error:
STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000
indicates a problem with your NTFS file system. You can usually solve this by running chkdsk/r from the XP Recovery Console.
The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
Here's how:
Boot into the Recovery Console Windows using an XP bootable installation CD.
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
Remote Desktop connection does not Windows 7 Home Premium computer connect
Hi guys,.
I regularly connect to computer Windows 2003 Server R2 of various computers via remote desktop without problem. However, I just got a brand new computer running Windows 7 Edition Home Premium and for some odd reason I can't connect to the Windows Server 2003 by using Remote Desktop connection. I tried to disable the firewall on both computers with no positive results. My DRC telling me that it cannot connect.Can someone give any idea why this computer refuses to connect? Y at - it no service apart from the DRC services that should be running and can I get a list and try to restart their? Is it possible to re - install Remote Desktop connection? Maybe a download for windows 7 because I find only one for Windows Vista & XP.Thank youViclabs...Hello
I suggest you to report this issue in support for Windows Server 2003 TechNet Forums: http://technet.microsoft.com/en-us/windowsserver/ff354964
Thank you.
-
Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?
So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?
Hi ZachRhodes3,
· You get the error message?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
Windows wireless and wired network connection problems
5 steps: how to set up your network wireless home
For reference:
-
I have a new computer. I installed the beta version. I run beta 2 other computers a Tablet and my phone. He taught me that I needed to separate other devices and try again. My credentials will not work and a reset email hasn't shipped yet. I would get my devices connected and connected again. If this is not possible I reluctantly will go back to explore. Mozilla has been so easy to use so far? Very frustrating.
Hi bizebill,
Thank you for your question. I understand that you want to synchronize all your devices. Please make sure that all the devices are updated at least at version 29.
If you were on a version before that, you need to set up a new email and the password with the new synchronization.I hope this helps.
-
Problem with WiFi connectivity with new Ipad Pro. Unable to connect to the wifi at home. My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home. I am able to connect Ipad Pro wifi work.
On the Pro iPad, tap settings > general > reset > reset network settings
You will need to re enter your Wi - Fi password.
Then try to connect to your Wi - Fi network.
If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network
-
I have an account to both personal and professional for Skype. I use the business account more. In the process of setting up the account company on my new computer, I asked for the connection information for the Microsoft account. After that, he wants now all merge so I sign in Skyp with connection to Microsoft. I don't want to do that. My business account is actually "owned" by my employer and I want to be able to make sure that everything is separate. How can I work around by using Microsoft information in Skype?
Thanks for your help!
Mary Pat
The only case where Microsoft Account is an absolute requirement is when dealing with the modern app from Skype (metro) for Windows 8/8.1.
Desktop version, that can be installed on computers Windows 8.1 requires Microsoft account.
-
Phoenix 850-150qe: peripheral disks connected West not always recognized by the new computer
I have two Western peripheral connected to my computer. I store all my backups picures and Painter on these two devices. When I first boot my computer into the AM sometimes readers are recognized and other times they are not. I can't understand why this happens. On my old computer also running windows 10 my discs were always recognized. On this computer when the error occurs, I have to go into the Device Manager and find readers and indicate the update drivers in order to make them work. Both drives work fine until I turned off the computer during the evening and restart the morning. Other times, that my devices are recognized all away without me having to do something for them. Has anyone else encountered this problem?
I have solved my problem. I had problems with my computer last week not to open some programs installed HP and spent two hours on the phone with a HP technician. During this time the technician has literally on my computer to see what was going on. The technician had crossed and disabled all of my menus start to see if it would solve my problem. A disabled element is the WD disk start up, so I have now enabled it and so far it seems to work. The technician explained that they met some problems with windows 10 and how it interacts with the computer. This new computer came with windows installed 10 while my old computer has been updated to 8.1 to 10 and I don't have the problems that I'm having now.
Maybe you are looking for
-
A whole long list documents in a folder, as well as other folders appears on the left side of my screen. How close that up and put it back on the desktop?
-
Can someone give me a link to a program nice functional and updated bluetooth update for PC so I can use my pc to move files on my mobile phone via bluetooth. And my cell phone has an installed bluetooth remote control so that it would work. except t
-
Can I add more photos to a DVD that I've already burned
Original title; create a dvd I burned s photo "s on dvd how can I add more at a later date than the deletion" this ready-made ar on the disk.
-
C4380 copying or scanning and changing proportions
Hello I want to copy a few brochures that are not quite A4, slightly shorter and slightly wider. I want to scan or copy using my printer HP C4380 standard A4 size borderless, thus altering the ratio of aspect slightly. I'm running on Windows 7 soluti
-
How to transfer music from windows 7 for Tablet nexus 7.
The difficulty to transfer file music music w/7 to my nexus 7. W/7 recognizes the nexus 7 but offers no help on download N/7