the hardware driver installation issue digital unsignature

Similar Questions

• Satellite M60 and the display driver installation

  Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
  Shorten one or both of the limit specified below and try again"! that to me?

  Hello!

  This looks like your username to long and the path of files extracted more than 88 characters.
  I think you should change your username or try with another account to update the driver, for example the admin account.

  If it doesn't work try to download the driver again.

  I hope this works, but you can give us feedback, what's going on.

  Good bye

• CPU speed incorrect for the 948 driver installation

  I have a COUPLE 948 printer that I'm trying to connect wirelessly from a laptop Vista Home Premium (32-bit). Whenever I run through the installation of the driver it tells me that the required minimum processor speed is 800 Mhz and mine is 4294967295 MHz. By my count I have clearly enough Mhz to get but refuses it to proceed further with the installation software.

  I know that the reported number is wrong because I have an Inspiron 9400 with a processor clocked at about 1700 Mhz. However if I look at the 'System' Control Panel, he told me that the processor and Ram information is "not available".

  Someone at - it suggestions on what I need to do to fix this?

  Rick, several attempts to re - install the driver that as well in safe mode and normal all is come up with the same problem - the installer to complain about the speed of the processor. I used the patch to remove completely all previous driver but it had no effect - I could not even go as far as a connection problem!

  Dig into the defective processor speed, led me to this post because speed was not reported properly on the system control panel.

  http://forums.pcper.com/showthread.php?p=4332899

  and when I entered the command

  net localgroup administrators NetworkService/add

  the values of processor and ram have been reported correctly and the printer driver has been happy to let me pass the system check.

  I guess that's not a scenario the pilot testers should consider.

  Thanks for your help

• the Oracle driver installation

  Hello all;
  
  In the past I usually installed the oracle drivers and basically went to my visual studio and he added as reference for me to be able to connect to an oracle database, but today seems otherwise with this new driver I've ever used. I just installed the following driver below
  
  http://www.Oracle.com/technetwork/developer-tools/Visual-Studio/downloads/index.html - ODAC 11.2 Release 3 (11.2.0.2.1) with Oracle Developer Tools for Visual Studio
  
  and when I went to my visual studio 2010 to add it as a reference to establish connectivity to an oracle database, I can not find the oracle.dataccess.dll... every suggestion on how to solve this problem will be appreciated. Thank you.

  I don't have the handy bug number, but I think that there is a bug in the installation scripts that make ODP not been listed in the VS .NET references in some cases. You should be able to use the Browse tab when you add a reference to navigate to %ORACLE_HOME%\odp.net\bin\\Oracle.DataAccess.dll to work around the problem.

  Also note that PACO questions are better posted in the ODP forum... ODP.NET

  It will be useful,
  Greg

• Qosmio X 300-15 H - canoe the video driver installation

  I can't install the video driver modern (for example, 300 + version). My laptop is not see and identify as a standard driver.

  What should I do? On this Web site, you have only old version.

  Yes you are right. Toshiba only offers older drivers. These drivers are tested and are protected from the GPU. This driver will not force the GPU to run on maximum performance to avoid overheating or damage GPU.

  Can you please post the link for driver download page?

• the network driver installation

  Hello

  I just reinstalled HP 3300 SFF with a clean win 7 pro. Download the drivers from the website of hp, but when I try to install I get a message that found no Intel components. Downloaded the Chipset driver with the network drivers but still no luck... any suggestions?

  Thank you

  This work, by downloading a pack finally got driver from realtek. Its always just under my nose.

  In case others encounter this problem, bad throw in the link to the Realtek download site under

  Download the Realtek software

• The AHCI driver installation failure

  I have a BIOS Gigabyte GA-MA770T-UD3 (1.0). F9G. When I try to load the AHCI driver for Gigabyte, I downloaded, I get a Setup error failed every time. If I set the BIOS to AHCI or not, the driver has still not install. If I leave the BIOS set to AHCI Windows freezes on-screen swirling of the points and I restart and change back the IDE BIOS. If I go to Device Manager, as suggested in another post, there is no entry for the SATA drivers or controllers even though all three of my drives are connected to the SATA ports on the motherboard. So far, there is nothing that I found that will solve this problem so I can properly configure my Samsung 859 Pro SSD. Suggestions?

  1, after a BIOS update, a shutdown of the pc is preferred. In addition, generally, BIOS settings

  by default, do not have SATA controller or RAID installed, it must be set manually

  for this purpose in the BIOS... In addition, any type of HD we use with this pc, is not

  drivers pc looking for, its all simply enable the BIOS, everything is 'plug & play '.

  or youre a setting (on or off), setting controller drivers is a windows

  adjustment, & the BIOS configures the establishment to run for windows...

  Whatever it is, try this link for more information.

  https://social.technet.Microsoft.com/search/en-us?query=AHCI&AC=2#refinementChanges=60&PageNumber=1&showMore=false

  In addition, make sure that battery MB is new, old batteries need BIOS

• Inspiron 3520 downgraded to Windows 7, the video driver installation causes the blue projection

  I demoted an Inspiron 15 3520 of Windows 8 for Windows 7, but every time I install the video driver recommended, from either windows update or in the Dell drivers section, I get a blue screen on startup. Roll back the windows standard VGA driver resolves the problem.

  Is there one another driver I can try? (I already run Dell Diagnostics, passing everything ok)

  Hi crawshs,

  Please check if the drivers have been installed in the order indicated the link after Windows 7 below downgrade:

  http://Dell.to/X1IKGu

  Click on the link below, enter the system service tag and click on submit. Select the operating system from the drop-down menu to get the drivers for your computer.

  http://Dell.to/QjjZDA

  Dell ships this system with Intel graphics card.

• The VMSCSI driver installation

  Hello

  I watched (and tried) a help of multiple threads in this regard - but without success!

  My Mac works Fusion 2.0.6 and I have a VM installed Win XP. The size of the drive has experienced huge growth - and now, I created a new virtual machine, consolidation of snapshots etc. which halved the total used disk space.

  At the launch of the virtual machine, I get the message on Win XP with one or more SCSI virtual drivers installed - and install the SCSI driver on the site of vm.

  I downloaded the file .flp, power off the virtual machine and attached the .flp as a disk file in the merge settings

  The launch, I now get a message saying THAT NTLDR is missing (and press a key to reboot). It does nothing and I have to close the virtual machine to regain control.

  Can someone help me get through this? I don't really want to go back and install a new virtual machine from scratch - but that's where I'm headed right now!

  By the way - if I OK the message from Fusion on SCSI drivers - windows still seems to load correctly

  Thanks for any help

  Patrick

  If you have not all indicators showing in the Windows Device Manager for SCSI devices and what you have said that you do not have, then there is no need to install the driver and you can just check the box in the message box to display the message.

• The Areca driver installation

  Hello

  I just reinstalled windows and can't get my installed raid driver. I want to use the latest driver areca off-site but may not know how to install it, everything I read seems pretty complicated to me. Y at - it an easy way to do it, or someone could direct me to some readings that help you? RAID is already set up, I just need to get windows to recognize so I can start working again.  Thanks in advance!

  -Alex

  I think that it comes to the procedure, I him did not myself for months.

  Download and uncompress it.  Right-click on my computer and select manage.  Open the Device Manager and find the correct entry of other devices and update with your unzipped files.

• Pavilion 500 - 200 t: about the location of the hardware driver under warranty?

  My office went out of warranty and when I go to find drivers and updates the HP site won't take me to where I can find downloads and install? Matter of fact, it does not appear that they will do anything, unless I am under warranty. At least Dell will allow you to download and update. I don't think it's important, but I went from 8 GB to 16 GB of memory (which has maxed out on this desktop) that I would need the drivers or updates? This p/c is around 2 years and think that some drivers/updates to update is available?

  deerpark243

  Since you already provided the link to HP Win8x for your PC drivers, if you have problems with any specific driver, you might be able to replace it with a HP driver by installing this driver in compatibility mode: http://www.windows10forums.com/articles/compatibility-mode.7/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• ProBook 4440 s: the network driver Installation

  I had Windows 8 on my ProBook 4440 s... reinstalled the operating system with Windows 7 family (64-bit).

  Since the reinstallation I don't have drivers for my wireless network card... can't seem to find them online. Have you tried several Aetheros Netwrok drivers from the HP site, but may not be the right ones b/c I get the message "' 802.11a/b/g/n Wireless adapter not found device: the device may not be present or could have been ejected/disconnected from the system" "

  Can someone point me in the right direction?

  Add' Info - t.

  For the network controller hardware ID

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

  Thank you

  Hello:

  You need this driver for this model of the wlan card.

  FTP://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61776.exe

• HP 15-ay005TX: can not adjust brightness Evenafter the graphic Driver installation

  Recently introduced Hp 15-ay005TX Notepad. Installed with Windows 10. I downloaded and installed the grapics drivers listed on the hp Web site. Installled AMD/Intel Switchable Graphics Driver and Intel graphics driver high definition (HD). I tried several times to reinstall.  When I tried to open the Radeon setting it shows this. I can't find anything else.

  I found the solution. Only, I installed the update of the bios. After the update the problem sloved...

• The ATI driver installation cannot find the previous installation?

  Hello

  Yestreday, I wanted to update my current graphics driver AMD high definition and so downloaded the latest version. Before installation, the installation wizard stated that no previous directory was found and would create a new. That didn't make much sense to me, as I already had the previous version of the driver on my laptop. After a bit of research, I realized that the previous version was installed in the program (x 86), and the new system would be installed in Program Files instead

  My question is; I still want to update the driver and how do I go about this? Must delete the existing one and install the new drivers?

  My laptop model is dv7 - 4198ca with ATI Radeon HD 5470 Switchable Graphics.

  Thanks in advance.

  I have a laptop different but the same 5470 video card. Update all video pilots made me a lot of problems, I had to restore a former win7 restore point to get the Panel to catalyst and switchable graphics to work again.

  During the update, I was warned with the same message as you (no previous directory).

  I suggest, if you dare, to update the drivers ONLY (for version 1.771 I guess) choose updated manual and then uncheck the other characteristics (catalyst, frame MS C++, etc). I also suggest you to create a manual restore point before starting.

• Cannot connect Nokia Lumia get one error "MTP Device doesn't have the USB Driver Installation.

  I tried to connect my new Nokia Lumia 920 to my PC and get the error message in my title.  After a repair, always get a message "USB MTP currency has a driver problem".  Tried same thing FixIt. Reinstalled driver always get the same message.  Someone at - it solve this problem?  I have a 64-bit Windows 7 computer.

  If you have solved it is already very good.
  otherwise this can work, because it worked for me :)
  Disconnect your usb phone, then turn off your phone and then plug the USB on the computer and then wait just the phone for start up and wait for about 5 min or so, initially, he could tell not to settle because the phone have not started upward again probably, but it should work after your phone go in it the home screen.
  If this does not work I do not know haha
  thing seems to work when you turn off and turn back on haha