The HP Envy 700-327C there a second CD player?

Similar Questions

• HP envy 700/214: Hey is the Nvidia GeForce gtx 750 ti FTW work in the Hp envy 700-214.

  Hey is the Nvidia GeForce gtx ti 750 FTW work in the Hp envy 700-214.

  TGGooch123, welcome to the forum.

  Yes, it should work without any problems.  I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however.  I would measure the rear plate i/o on the front of the case to ensure that it enters the space, however.  I suggest to buy an EVGA card.  They make very good products and very good Technical Support (1-888-880-3842).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Help to install a second hard drive in the HP ENVY 700-230qe CTO desktop PC

  I am installing a Western Digital 1.5 TB internal hard drive (model # WD15EARSSP) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the instruction menu and the procedure for the second installation of HD? Which cable kind and other supplies do I need to connect the new HD to my PC? SATA cables: right-right, right - left, right-right angle... etc.

  I am not sure that the cables will be available inside the computer.  I suggest you to open the case to see if there is a data cable.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Two questions on the HP Envy 700-230ea before you buy

  I am looking to buy a HP Envy 700-230ea of PC World.  The plug that I saw didn't quite answer two questions that I have to solve before committing myself.

  1. the operating system is Windows 8.1 installed the 64 bit version (I need it to be)

  2. the machine is supplied with a 2 TB HARD drive.  But I need to add a second 2 TB HDD.  Is it possible to do it in the machine?

  On your HP UK Site, I would say that it comes with 8.1 / 64 bit and it has 3 internal hard drive bays; 2 external optical drive bays.

  Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab

  Be forewarned of desktop computers HP ENVY do not come with a manual, just quick pictorial international owners set up guides, and there are no available records. The Windows 8.1 operating system can control, but for the computer itself no manual, it's like buying a new car, try to understand all the switches, levers and lights. Most are easy to understand, but some are not but I would like to contact PC World and make sure he has the 64 bit OS.

  Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy 700-470na: changing the case of the HP Envy 700-470na.

  Today, I upgraded my PSU and GPU for my HP Envy 700-470na. The case for my PC is too small and I can barely sort out the cables.
  
  If someone can recommend a decent case that is less than £50, can put all the pieces of pc HP in the case like the motherboard, hard drive etc and lots of space for the circulation of air and cables. Who would be appreciated! Thank you. I hope that my problem can be resolved soon.
  
  PSU - Corsair CX600M
  GPU - EVGA GTX 970

  The form factor for the motherboard is: Μatx: 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches).  You must buy a case that is made for this.  This means that the accessory in the case must match the holes in the motherboard.  HP has their mothers caught their specifactions cards.  So, they can be standard.  In addition, the connectors in the case may not match the connectors on the motherboard.  The front connector for the power button is the one who comes to mind.  It is very difficult to recommend a case that is certain to work.  You can find the case you like and contact the manufacturer for Technical Support to see if they can make sure it will work for your components.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy 700-229C: what graphics cards are compatible with the HP Envy 700-229C?

  Hello, I was looking for a graphics card for my HP Envy 700-229C computer but I don't know that his are compatible.

  @kabirvirdee, welcome to the forum.

  Any video card which is PCI Express 3.0 x 16 will work with your computer.  The video slot is a PCI Express x 16 (Gen 3.0).  You must ensure that the card insert in the space provided.  This can be done by measuring the back plate of e/s in front of the computer.  Also, you should check the power of the power supply unit (PSU) that is required.  The power supply of your computer is 460W.  The power supply must have at least more than the card requires 100W.  I love EVGA cards.  If you decide to buy one of their cards, you can contact their Technical Support (1-888-881-3842) to help choose the best card for your system.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy 700-327c: graphics card on HP Envy 700-327c update

  I just bought and am preparing to install an AMD over-pants W7000 C2K00AT 4 GB GDDR5 SDRAM PCI Express 3.0 x 16 ATI Nvidia Quadro graphics in my HP Envy 700 - 327 c.  Any input as to what I can do to make this a free update of the problem?

  You are welcome.

  I would like to do some research before buying a power supply.  You may need more power than I recommended.  It says in the specs it uses less than 150W, but even more than the current PSU can provide with other components.

  I'd certainly appreciate hearing how things are going.

• The HP ENVY 17-j120us there sata iii?

  I think to put the HP ENVY 17-j120us and could not find if it is SATA-III or not, and if it comes with a quad core. I read that some lower Core i7 comes with core duo.

  On another note. My HP EliteBook 8730w is SATA-II and I use an Intel SSD 520, which is capable of SATA III, someone knows it if I can wipe my SSD, then paste it into the new laptop and have it clocked at SATA-III? Is it that simple? Note also that I have the system of operating full W7, so no problem on this end.

  Any help would be appreciated, thanks.

  Hello

  My loan Envy 17 machine uses an Intel i7-4702MQ processor which means image.

  Kind regards.

• HP Envy 700-327C: walk of recovery materials (D); What would they

  Believe it is 64 bit, but not sure if that makes a difference. It's Windows 10

  Content of the recovery disc (D) seems to be ALL the files that are located on drive C with the exception of the info Office more a section marked or named "Recovery". Is it the way it is supposed to be?

  The reason why I ask this is that I saw a question in a forum of Support HP indicating "Recovery Drive Full - new HP Envy Windows 10" and the answer was - "If your recovery disk is displayed as having a drive letter, which could be the source of the problem, as there may be a default download setting (as in a browser you use) which writes that animate its temporary files instead of disk. OS. " Then there were know get into disk management to see if the volume of recovery has a drive letter (D) and if so, how to erase it.

  My d drive recovery - is not complete; It shows 1.89 GB free of 15.4 GB - (I'm not sure of what he showed when the PC has been implemented) and, as noted above, has all the files that are located on drive C with the exception of office. When I go to disk management the recovery volume shows the drive letter D. So delete it or not? Must drive D materials reproduce what's on drive C as described. Delete "D" drive Mgmt will create problems?

  Thanks for yoour help

  @OPAMA, welcome to the forum.

  The D: partition is only recovery files.  There should be no other data on it.  However, that said, if you did the recovery media when you bought the computer and are positive that it works, you can delete the D: partition.  Normally I leave just to be sure.  Is the best solution to your problem, check which drive is when you save the data.  In addition, you can remove all the data that are the same as on the C: drive.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy 700-327c: Realtek RTL8151GH-CG

  So I just got this office of second hand without a hard drive so I put a new in reloaded windows with the cd key on the side of the tower and when I booted the system up, I noticed six devices without drivers.

  List

  Blutooth controller

  Ethernet controller

  Network controller

  PCI Simple Communications controller

  SM Bus controller

  (USB) Universal Serial Bus controller

  All listed so I jumped on the HP site and load the drivers from the website well is when things went from bad to worse. I managed to get everything except the SM Buss and PCI Simple communication drivers on the hp site I was able to find the rest of them without too much trouble and had all this work.

  Then, I hit windows update and just a flood of errors which none come into play THAT AFTER I installed the drivers. I even went to the length of the purchase of a NEW copy of windows 7 just to play it safe because I didn't know the State of the series on the side of the case and even if he says he's active, I realized that the devil may be that is the question.

  I ran SFC he didn't found any problems with the installation I used a number of tools from microsoft to attempt to repair that I managed to go up to SP1 before my update of windows would just stroll on the updates. Yet once, I guess it's the drivers because none of this started after I installed the drivers. Anyone has any ideas on this one?

  Finally solved the problem after installing SP1, I just let it check the updates at night and this morning about 10 hours later he finds updates and worked without problem.

• ENVY 700-327c: need Power Supply amperage on + line 12V

  I want to install a discreet graphics card in my new DESIRE c 700-327, who has a power of 300 W.  I need to know the available amps on the + line of 12V of power supply of the stock so that I could either one) choose a power card that works with the original, or b) improve nutrition.  Anyone know if the upgrade of the power supply will void the warranty?

  When in doubt, try the simplest thing first - look!  On the side of the PSU contained the information I wanted, unlike the HP PSU on my units of office earlier.  + 12Va - 12A line and + 12Vb line - 16A.  Don't know what line feeds the PCI-E slot, but neither is sufficient for the card I want to add.  Even my old EVGA Nvidia-powered card requires 18A on the + 12V line when it is matched witn an i7-4770.

• HP Envy 700-327C: upgrade to windows 10

  Windows 7 Pro (64) was preinstalled on my HP Envy.  It is configured to automatically install the Windows updates.  I have the app get Windows 10 and the icon appeared in my system tray indicating that I had booked the upgrade of the W10, but then he suddenly disappeared.  When I choose the upgrade of Windows in the list of programs all he used to reassure me that the upgrade of the W10 has been used, but now it's over.  The history of the update indicates that the upgrade to Windows 10 failed.  CIP 1 service is installed, and as far as I know, all the other critical windows updates.

  How can I upgrade to Windows 10?

  Hello

  July 29, 2015 is history now, do you still need this icon? Please go to the following link:

  https://www.Microsoft.com/en-us/software-download/Windows10

  Kind regards.

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• HP ENVY 010xt 700: HP ENVY 700-010xt PSU upgrade

  Hello

  I have the HP ENVY 700-010xt and I want to switch the power supply.
  
  Will size THEM PSU to adapt in this case?  If so, is there a more detailed video that shows how to correctly take the current out and put the new?

  Hello

  Please consult thisHP displayed information.

  Your PC has the typical ATX PSU with the dimensions of a 5.9 "by 3.4"to 5.5".

  TheCX500, or CX600 Corsair would perfectly fit in your PC.