HP Envy 700-327C: upgrade to windows 10

Similar Questions

• HP Envy 700-311na upgrade to windows 7 missing drivers

  Please help I just bought a 700-311 desire and put windows 7 on it as we just couldn't pass to 8.1

  Now I have missing drivers and can not find them anywhere

  I need

  Ethernet controller driver

  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF3103C & REV_OC

  Network contoller driver

  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086 & REV_9B

  They are necessary for the Professional on Windows 7 64 bit operating system please

  Hello:

  For the first hardware ID, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  For the second, download and install the driver for the second on the list.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24217

  You will also need this bluetooth driver...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24189

• The HP Envy 700-327C there a second CD player?

  HP Envy 700-327C has a second CD drive or is this a slot to install a?  It shows a picture of a screwdriver; This could mean one is necessary to unlock the drive or is necessary to install a drive?

  Hello

  I have not seen a pre-built machine that has 2 ODD. This machine has an ODD, but there slot to spare for a second ODD (or CD/DVD drive).

  http://support.HP.com/us-en/document/c04291966

  Kind regards.

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• HP Envy 5530: Since upgrading to windows 10, my laptop cannot see my HP Envy 5530 iwireless printer

  I have upgraded to Windows 10, since then my pc can't find my HP Envy 5530 wireless printer. I downloaded some sort of doctor scanning HP according to a previous post on this forum, but it does not work and my pc cannot see my printer yet. Please can someone help? My laptop is a Levono Idepad.

  Hey @Rayprinterman,

  I see that you have some problems with printing to your craving 5530 e - all - in - one printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Close any programs you have open on your PC.
  5. In your search type in printers bar and open devices and printers.
  6. Right-click on any icon of your printer listed.
  7. Click on remove the instrument.
  8. Repeat for all other icons of your printer listed.
  9. Click Add printer, and follow the prompts to add a new queue for your printer.

  Please let me know the results after following the above. If this allows you to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP ENVY 700-349 Desktop PC: Windows 10 activation issues

  So, I have recently reinstalled windows 10 on my computer (from Windows 10 Windows 10 once again) and I wiped my HARD drive, so it can reformat properly for the installation of windows. After installation I then needed to reactivate my windows and putting in my product key after searching physically inside and everywhere in my computer I can't find any key to activate my windows licenses. (When I bought my computer there was windows 8 and then I upgraded to windows 10 free no problem) I'm currently sucks, thank you.

  Already activated my windows by contacting support, gave them my details and every thing is correct. For others who have this problem just pass the link https://partner.support.services.microsoft.com/en-gb/co... and select chat, tell him your story and it should be good!

• HP Envy 700-249: upgrade graphics from GT635 to GTX960... I was wondering if computer supports

  Hello

  I am looking to update my graphics card between a GeForce GT 635 a 960 GeForce GTX amp.

  I was wondering if my computer would be able to support it, and if the card would fit well inside?

  My computer specs:

  HP Envy 700-249

  Intel Core i7-4770

  CPU @ 3.40 GHz

  12 GB of Ram

  Power: 460 W

  Thank you

  Mitchell

  Greetings,

  Your PC BIOS will support the map.

  You need a 6 connection pins on the map.

  The card is a double slot and 9.5 inches in length. Check your turn measures and make sure that you can install a card double slot.

  The food is fine, as long as you have a connection to pine trees six or eight available.

  NVIDIA provides an adapter.

  Disable secure boot. Enable legacy start.

  See you soon!

• HP Envy 700-327c: graphics card on HP Envy 700-327c update

  I just bought and am preparing to install an AMD over-pants W7000 C2K00AT 4 GB GDDR5 SDRAM PCI Express 3.0 x 16 ATI Nvidia Quadro graphics in my HP Envy 700 - 327 c.  Any input as to what I can do to make this a free update of the problem?

  You are welcome.

  I would like to do some research before buying a power supply.  You may need more power than I recommended.  It says in the specs it uses less than 150W, but even more than the current PSU can provide with other components.

  I'd certainly appreciate hearing how things are going.

• HP Envy 700-060ea: upgrade to a 770 MSI GTX

  Recently, I improved my diet for a corsair CX750M, now I want to install a MSI GTX GPU 770 from 760 GTX preinstalled OEM, but searching through the forum, I see that there are problems with the bios when installing a new GPU, but this issue seems to affect version 7 BIOS, I have the version of the bios on a motherboard ms-7826 80.15 does that mean I can install the MSI GTX 770 and my HP Envy 700 - 060ea PC will start and work properly, all responses will be greatly appreciated.

  Hello

  HP OEM graphics cards are manufactured according to the specifications of HP and are certified to work in the particular model PC.

• Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

  Hello

  I'm of the Germany, but I'll do my best to write this in English.

  The product name and number: HP Envy 17 3010eg {information}

  Operating system: Windows 8 Pro 64-bit

  Drivers: everything up to date

   

  Long story short,

  I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

  So I waited until the driver for Windows 8 support has been completed by HP.

  This month, I noticed that HP has released a graphic driver for Windows 8.

  Happy as I was I installed Windows 8 immediately via upgrade function.

  I installed all the missing drivers.

  * Update Bios to F.08*

  I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

  BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

  Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

  The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

  So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

  I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

  Nice, but I have no idea how to turn it on again.

  So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

  So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

  * Tested in Bios Version F.09*

  Yesterday, I noticed another Bios Update. This time in version F.09.

  So, I updated the Bios with Windows 7 installed.

  Everything went well (I thought!).

  Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

  BUT without success...

  So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

  * Problems with Bios Version F.09*

  BUT then, I noticed a strange behaviour of my laptop:

  -proximity sensor no longer works

  -the keyboard backlight cannot be (DIS-) activated

  -the brightness of the backlight is half as usual

  -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

  * Version of the Bios downgraded to F.05*

  So, I spent to the version of the Bios to the older Version available: F05

  And I was a little shocked by the result.

  Windows 8 acknowledged the Intel HD 3000 graphics card again!

  The problem is the Bios!

  Then, I upgraded the version of Bios version to see which version of the cause of the problem:

  Œuvres F05

  Œuvres F.06

  F.08 does not work

  F.09 does not work

   

  So I decided to stay with the version F.06

  BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

  I installed the driver anyway...

  I found myself with a black screen... I had to reinstall Windows completely.

  Yet more long story short,

  I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

  I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

  So for the moment I am absolutely no idea what the problem might be.

  The support has not yet heard of these problems and I have not found any website which explains the same problem.

  Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

  Someone else got the same problems?

  What do you think? Is it really a problem with the Bios?

  What can I do to solve the problem?

  for me the best driver are:

  http://leshcatlabs.NET/

  Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.

• HP Envy 700-327C: walk of recovery materials (D); What would they

  Believe it is 64 bit, but not sure if that makes a difference. It's Windows 10

  Content of the recovery disc (D) seems to be ALL the files that are located on drive C with the exception of the info Office more a section marked or named "Recovery". Is it the way it is supposed to be?

  The reason why I ask this is that I saw a question in a forum of Support HP indicating "Recovery Drive Full - new HP Envy Windows 10" and the answer was - "If your recovery disk is displayed as having a drive letter, which could be the source of the problem, as there may be a default download setting (as in a browser you use) which writes that animate its temporary files instead of disk. OS. " Then there were know get into disk management to see if the volume of recovery has a drive letter (D) and if so, how to erase it.

  My d drive recovery - is not complete; It shows 1.89 GB free of 15.4 GB - (I'm not sure of what he showed when the PC has been implemented) and, as noted above, has all the files that are located on drive C with the exception of office. When I go to disk management the recovery volume shows the drive letter D. So delete it or not? Must drive D materials reproduce what's on drive C as described. Delete "D" drive Mgmt will create problems?

  Thanks for yoour help

  @OPAMA, welcome to the forum.

  The D: partition is only recovery files.  There should be no other data on it.  However, that said, if you did the recovery media when you bought the computer and are positive that it works, you can delete the D: partition.  Normally I leave just to be sure.  Is the best solution to your problem, check which drive is when you save the data.  In addition, you can remove all the data that are the same as on the C: drive.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Envy 17-k270: upgrade of Windows 10 - error c1900101-30018

  Hello

  I tried upgrading my laptop for Windows 10 several times and I get the following error message: c1900101-30018 and FIRST_BOOT SYSPREP. I tried to update through windows update and through the USB with no success so far. My last option will be to do a clean install of windows 10. I wonder if I will come through the same mistake by doing this.

  Has anyone done a windows upgrade installation clean 10? Has anyone found a solution or workaround above?

  Any help is very appreciated!

  Thank you

  I'm from Mexico, I had the same error code.

  Solved it by uninstalling tune up utilities and antivirus, update now Windows 10 without problem, using the official application "media creation tool" from microsoft to install via USB, now Windows 10 is running and active

  http://www.Microsoft.com/en-us/software-download/Windows10

• ENVY 700-327c: need Power Supply amperage on + line 12V

  I want to install a discreet graphics card in my new DESIRE c 700-327, who has a power of 300 W.  I need to know the available amps on the + line of 12V of power supply of the stock so that I could either one) choose a power card that works with the original, or b) improve nutrition.  Anyone know if the upgrade of the power supply will void the warranty?

  When in doubt, try the simplest thing first - look!  On the side of the PSU contained the information I wanted, unlike the HP PSU on my units of office earlier.  + 12Va - 12A line and + 12Vb line - 16A.  Don't know what line feeds the PCI-E slot, but neither is sufficient for the card I want to add.  Even my old EVGA Nvidia-powered card requires 18A on the + 12V line when it is matched witn an i7-4770.

• HP envy 700-210xt 8.1 windows update windows PC bsod crash

  I've been running my desire 700-210xt with Win 8.1 almost without fail until about a week ago. Windows Update tried to install an update that caused my PC go into a bootloop. I was unable to perform a recovery of windows, startup repair, refresh, repair installation, no matter what. I ended up reinstalling Win 8.1 from scratch. I went another 2-3 days or more without a problem, has received another but Windows Update, once again I have this exactly the problem. You guys have all problems like this? I'm not sure what update is causing this issue but plan to reinstall again... And suppose that disable updates until I can resolve what is the cause. Any ideas?

  I was actually able to fix my problem with this command from within the recovery console cmd

  DISM / image: C: \ / cleanup-image /revertpendingactions

  found a similar problem in this thread which lead to know what to do.  So well done to this guy... however.  After connection back and check the available updates I came across KB2930275, an update... which, after googling, it was, causing problems just like that on Windows Pro 8.1 specifically.  For now I'm good but shaped I'd share this update might be avoided.

  http://www.justinphillips.co/General/fix-Windows-8-1-update-reboot-loop

• HP ENVY 15-k253ca: lower HP ENVY 15-k253ca upgrade to Windows 7

  Downgraded to Windows 7 default Windows 8.1. In the BIOS enabled Legacy Support, Secure Boot option is disabled, then selected the drive internal CD/DVD-Rom as boot option.

  Does anyone know the number of brand and part of the controller wireless LAN? As I tried "Realtek RTL8723BE/RTL8188EE 80211 b/g/n Wireless LAN Driver" at HP, did not work.

  Hello:

  According to the list of parts for your laptop, it has a WLAN11AC + BT4 1 x 1 USB + PCle HMC MOW.

  http://PartSurfer.HP.com/search.aspx?SearchText=J9K76UA

  Part number tells me that it is an Intel Dual Band WIRELESS-AC 3160, for which you can get the drivers wireless and bluetooth below...

  This package provides the driver to support the Intel 7260/3160 Wireless LAN card in the laptop models running a supported operating system.

  File name: sp69038.exe

  This package contains the installation package driver for the Bluetooth of Intel in the laptop models running a supported operating system.
  
  NOTE: so that this package to install correctly, the previous package should be removed (as appropriate) before running this update of the driver.

  File name: sp69039.exe