The ideapad 100 pixel line.

Similar Questions

• Dead on the Ideapad Z570 pixel

  3 butterflies have elapsed since I bought a new Ideapad Z570. A week ago I noticed a black dot near the Windows Start button. I tried to wipe it with a cloth, but he was always there, discovered it's a dead pixel. I called Lenovo support, send some pictures and they have confirmed that this is a dead pixel and to guarantee it must be 3 dead pixels. They also told me that if I want my screen has changed, I have to pay 160 euros aroud. I don't think it's ok only after 3 months of use, a laptop should have this kind of problems and I am very disappointed with the response, I received service of Lenovo. After I paid 700 euros for the laptop around to pay another 160 for a display. I've owned computers portable to other brands but never had any problems. Now I have to wait and hope that more than 2 pixels would die?

  Sorry to hear that, but there is nothing that you/we can do about it. warranty does not cover replacement if you have less than 3 dead pixels.

• Lenovo Ideapad 100 is compatible with Windows 10?

  Lenovo Ideapad 100 is compatible with Windows 10? I plan on upgrading... but I'm afraid that my laptop will be broken if I have improved. Thank you for the answers.

  Hello titan123, welcome to the forums.

  Yes the IdeaPad 100 systems are compatible with Windows 10, some models are on sale with 10 Windows preinstalled. pls see the PSREF to your model; http://PSREF.Lenovo.com/

  Drivers are also available on the support site for the download; http://support.Lenovo.com/us/en

• additional 100 pixels on each side, why?

  I searched and read the forums, but I guess I don't understand the reason for the extra 100 pixels.

  When I'm in design mode and I pin an object at x = 20 to '0' I expect it to be 20 pixels from the edge of the browser. But it is not (see table)

  But when pinning an object at x = - 80 it is 20 pixels from the edge of the browser. (see attachment)

  The reason why I ask you this, when I design my site on graph with pixel position paper that I have to use mathematics to change my drawing as Muse puts an extra 100 pixels on both sides of the document. I know its simple just subtract but why. If I put it at 960 pixels wide it shows 1160 in creation and mess up my placement mode. Why is it necessary to put the extra 100 pixels.

  I found this in the forum, but the explanation seems to me that you will see a horizontal scrolling earlier because of the extra 100 pixels.

  "

  So what that means.

  If your page is 960 pixels wide with 0 margins / padding 0.

  • You won't get a scroll bar when you make your browser 960 pixels wide.
  • If the width of the browser is more broad then 960 pixels, you will see your browser settings complete (in the example above - grey)
  • If the width of the browser is more small then 960 pixels, you will see a horizontal scroll bar.

  If your page is 960 pixels wide with margins 0 / 100 pixel padding.

  • You won't get a scroll bar when you make your browser width 1160 pixels wide (960 for page) + 100 padding left + padding 100 right
  • If the width of the browser is wider then 1190 pixels, you will see the settings of your browser fill (color / image - no matter what you put in it)
  • If the width of the browser is smaller pixels then 1190, you will see a horizontal scroll bar.

  "

  

  Thank you for your help and explanation. I'm afraid that my knowledge of Muse of work method is relatively new to me, only after using it for a year and 20 years of work in Dreamweaver and code editors may interfere with the way in which I use Muse.

  Just to clarify, I have setup my new site with zero padding and margins to zero , with the centered content. So when I opened my master page, I see a margin of 100px on the left and the right, as in my screenshot. Is it okay to Muse?

  I told my new site to be of a minimum width of 960px and you'll notice the second screenshot, some margin guides and leaders from -100px and continue until 1160px, an addition of 200px on my page 960px I specified earlier to have zero padding and margins to zero .

  I apologize if I'm being obtuse, but this seems very different from any traditional method of work.

  Kind regards

  Pete

  

• Lenovo Ideapad 100: Removing the battery

  Hello, I have problems with my removing the battery. As my title says, I have a Lenovo ideapad 100, and I'm supposed to send it off for repairs. For my problem, I need to take out the battery because it is not part of the problem; However, I can't get out. I've read here to take off the base, but in trying to do this, it seems he breaks the internal clamps keep attached. I don't want to keep these break just to pay for them to be repaired afterwards. Is there an easier way to take this base off?

  Those who may be generic instructions. In the case of your machine, you can contact the Service to confirm, but my feeling is that it does not apply to batteries regarded as cards.

  Kind regards.

• Lenovo IdeaPad 100-15IBD keyboard and the touchpad does not

  I bought a Lenovo IdeaPad 100-15IBD a few days ago, and after a series of problems that I managed to fix, I woke up this morning to find that my keyboard and the touchpad do not work. Last night (about 9 hours ago) it was working fine. Anyone has an idea how can I fix?

  Problem solved. It was because of the abdriver for keyboard and mouse I have installed from the official website of lenovo, I don't know how or why, but when I uninstalled it, it started working again.

• IdeaPad 100 s-11IBY problems after installing the update of Windows 10 anniversary (aka version 1607)

  Yesterday, my 11IBY-100 s installed update 10 birthday Windows (aka Windows 10 Version 1607). Now, it has multiple problems and is unusable.

  1. the keyboard (Yes, the built-in keyboard) does not work. None of the keys (letters, numbers, 'actions' as BACKSPACE) work not at all. If I plug in a USB wireless keyboard, it works fine. So maybe there is a problem with the device driver for the built-in keyboard with the update of the anniversary. The keyboard works perfectly until Windows Update installed upgrading birthday.

  2. the trackpad is not working. If I plug in a USB wireless mouse, it works fine. So maybe there is a problem with the device driver for the trackpad with the update of the anniversary. The trackpad has worked very well until Windows Update installed upgrading birthday.

  3. the Kingston 32 GB microSD card plugged into the microSD port is not recognized by the file Explorer. If I plug the 32GB Kingston microSD card in a USB microSD card reader and plug the card reader into a USB port, microSD storage is recognized in the file Explorer, so the microSD itself is fine. So maybe there is a problem with the device driver for the port microSD with the update of the anniversary. The microSD port works great and the micro SD card has been recognized in the file Explorer until Windows Update installed upgrading birthday.

  4. There is no audio data, Windows now indicates that no audio hardware is installed. So maybe there is a problem with the device drivers for the builtin microphone and the built-in speaker with the update of the anniversary. They worked fine until Windows Update installed upgrading birthday.

  I tried to do a RESET, but unfortunately although the reset worked, it resets Windows 10 Version 1607 (aka anniversary update) not an earlier version of Windows 10 and I still have all the problems above. Far as I can see, the Windows settings now say there is no history of update and no previous version of Windows, so I can't use any method of recovery which is available on the PC itself to go to an earlier version of Windows.

  Please can someone advise how to reset my PC (and where I can get the 32-bit Windows 10 appropriate ISO file or other) Windows 10 Version 1511 (i.e. before the update of the anniversary)?

  Or, Alternatively, device drivers are valid for Windows 10 Version 1607 for builtin keyboard, trackpad, port, microSD, microphone and speaker available somewhere? I can't see on the Lenovo Web site.

  Ron

  On the Lenovo site, in "Drivers and software" for this unit, there was a "Chipset" called driver «Intel platform driver for Windows 10 (32 bit) - Ideapad 100 s-11IBY» I downloaded and installed, then after being invited, rebooted the device. I am pleased to announce that

  the keyboard now works

  (b) the trackpad works now

  (c) the microSD card is now recognized by the file Explorer

  (d) the audio now works

  Ron

• I tried to adjust my police going into the choice of pixel and now it's so small that I can not yet return to

  I followed the instructions online and reset the pixels the wrong way and now the police is so tiny that I can't even see fit.
  I tried to reinstall firefox, but it does not work

  You can edit the prefs.js file in the profile folder of Firefox with a text editor such as Notepad and remove the line with the layout.css.devPixelsPerPx pref or change the value 1.0

  • user_pref ("layout.css.devPixelsPerPx", "1.0");
  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

  The "Application Data" in XP/Win2K folder and the folder "AppData" in Windows Vista, Windows 7 and later versions are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  Alternatively, you can create a file user.js and place the above posted user_pref() line in the user.js file and start Firefox once to reset the pref.

  • http://KB.mozillazine.org/user.js_file
  • http://KB.mozillazine.org/Editing_configuration

  After you have done this and have restarted and closed Firefox, you can remove the user.js file because otherwise you cannot make changes to this pref that will last.

• IdeaPad 100 bricks through Windows update [solved]

  I got a 100 s the Ideapad Lenovo about three weeks. Can I have solved the problem of the SPACEBAR that some of them have folding bar PIN under this contact is therefore preferable, but he now has a more serious problem. The update failed to 10 Windows version 1511 a brick machine, probably something to do with how it doesn't have space to perform the update. Apparently she could never have enough space, even if completely wiped out personal data.

  The BIOS of the laptop, or at least mine, seems almost completely disabled. I saw some people install a Linux distribution with a degree of success which would require to be able to boot from a USB device. I was unable to boot from a USB key. I'm about to try to boot from a USB DVD drive, but I suspect that it will be blocked too. It seems very strange that these laptops have a BIOS in various States of ease of use.

  Useful options in the BIOS appear to be blocked - the arrow keys can not pass by them. Is it possible to Flash the BIOS to get a unlocked? Lenovo seems to have prevented people in computer science to put things right that likely their service centers will eventually have to do in the very near future.

  Is there a procedure arcane that I can use to completely enable this BIOS? Or the GET to all the less back the ability to boot from a USB DVD drive? Reinstall Windows from a DVD would be quite simple then. (Is there no matter what reason it is 32-bit Windows? Can an iso 64-bit being used and still active if reinstall from scratch?)

  I have my receipt from the Bank, John Lewis to the United Kingdom, but I'm not too happy about sending a machine with personal, connected data in Bank etc. stuff, as I don't know if the machine can be débriquée without destroying what currently remains on the laptop. It seems unlikely, but if there is a way I can fix the problem, I would have preferred that.

  Any help is appreciated. Thank you.

  Everything is perfect now, the chipset driver Intel Lenovo web page for this model being the missing piece. I made a few changes to my posts here for others to reference later. 17 GB free on main disk too which is quite an improvement.

• Extract the first line containing "critical" or "E-Stop" of the last avalanche of line

  Hi all

  I'm watching some test systems by analyzing their audit files.

  In this case, the platform generates several line 100 files in a specific folder. The code below is to find the last file and extract the contents of the last line of the last file.

  

  Unfortunately, when an error occurs, the main software generates not only one entry, but an avalanche of lines [not a specific quantity of them, depending on how much the alarms are resolved] and I'm now ideas of how I could identify and the contents of the first line containing "Criticism" or "E-Stop" to exit from this avalanche [line avalanche started 22.27].

  As an example, the above program is extract the yellow line, while I need information from the blue line.

  

  Any idea on how I can do this?

  See you soon,.

  You can add this snippet to the top of your existing code.  I changed the indicator table to a table so I could highlight the line.

  

• my photos should be 100 pixels wide, 100 pixels height and file size not more than 15kb

  photos must be of pixels of width 100 height 100 pixels and the file size no more than 15kb

  photos must be of pixels of width 100 height 100 pixels and the file size no more than 15kb

  ============================
  I suggest that make you copies of your
  photos for this task... you certainly do not
  these very small versions to crush desire
  (replace) your original files.

  Windows Live Photo Gallery-
  How to resize pictures:

  First... If the pictures must be square...
  You can crop the photo by clicking on... Difficulty.
  Crop the Photo / square / apply.

  Right-click one or more selected inches...
  Choose... "Resize" in the menu...
  Choose a size... * Custom / 100 *...
  Navigate to a folder in which to save in...
  On the left, click on the button "resize and save"...

  (I suggest that you save it resized)
  photos to a new folder to prevent
  (replacement) by replacing the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to calculate the top 100 in analytical report of obiee 11g?

  Hello

  I am creting report Analytics obiee 11g.

  I plug 5 columns, balance, status of the loan, district loantype.

  I want to display the data from the highest of 5 columns in the analytical report...

  For this report, I would like to add customized lines...

  My requiremt, I want to show the top 100 sales, the total amount outstanding

  and I want to add personal calculation as (total of balances / top 100 outstanding balance) * 100

  Please help me,

  I tried, I don't get.

  Please help me, how calculate these?...

  Thank you and best regards,

  A.Kavya

  Hello Kayva,

  First of all, must be defined, the grade you want, ask yourself, if you want to rank by period, branch etc, so you must use "RANK (according TO SIZE).

  I made a sample with the similar columns you use, please give.

  I've done 4 criteria using 'UNION' (not 'UNION ALL', not 'INTERSTECT', 'LESS'):

  

  And my results are:

  

  Check it out:

  1st test:-J' have the sum 187 157 538.57 as the sum of the top 10 projects, the Company (Empresa) and period (Mesanodocum)

  2dont criteria: -check the second line "SumaTotalProyectos" which is the sum total of society in Ene-2015 (January 2015) for all projects. Who is 211 249 318,42

  3 criteria:-check the 187 157 538.57 which is the sum of the top 10 projects

  4 criteria: -which is the percentage of it, 187 157 538.57 / 211 249 318,42 = 88.60%

  How can you put?

  1. allows you to check the criteria 1: the sum of the top 10 projects

  

  Check the filter of RANK

  

  2 to check the 2 criteria: total sum of society

  

  

  3 to check the 3 criteria: ranking of the sum

  

  

  4 to ensure criteria 4: percentage

  

  

  Note:

  As you can see I have two projects "columns", I need to get the sum of ranking, for example, you must do a ranking by branch and get the same, has twice this column to your criteria and after it allowed you to exclude.

  

  Kind regards

• Transform the data in the column marked in lines

  I've already implemented Tom Kytes solution for dynamic / variant in the list that is found here and on his own works very well when passing a variable.  I'm trying to use it to decode several rows in a table.  Each row has a column of delimited data and I want to turn these data delimited by lines.

  Here is the configuration.

  create table data_source

  (upload_id number not null,

  data_source_id integer not null,

  sources varchar2 (50).

  ERROR_MESSAGE varchar2 (100)

  );

  insert into data_source (upload_id, data_source_id, sources) values (1, 1, 'a');

  insert into data_source (upload_id, data_source_id, sources) values (1,2, 'A:B:C:X');

  insert into data_source (upload_id, data_source_id, sources) values (1, 3, 'c');

  insert into data_source (upload_id, data_source_id, sources) values (1, 4, 'B');

  insert into data_source (upload_id, data_source_id, sources) values (1.5, 'Y');

  create the table data_source_lookup

  (varchar2 (10) sources non-null)

  ;

  insert into data_source_lookup (sources) values('A');

  insert into data_source_lookup (sources) values('B');

  insert into data_source_lookup (sources) values('C');

  My goal is to update the table data_source for lines where there is an invalid data source, in the example above that would be 2 and 5 lines.  I can do this individually using the in_list solution:

  Select * from table (in_list ('A:B:C:X',' :'))))

  If column_value not in (select data_source_lookup sources)

  Returns 'X' as expected.

  What I am struggling with is a method to make it through all the lines for a given loading ID:

  Update data_source

  ERROR_MESSAGE = "Source of data" is not a valid value

  where upload_id = 1 and...

  I tried to create a join cross- like this:

  Select ds.data_source_id, ds.sources, x.column_value

  DS data_source cross join (select column_value in the table (in_list (ds.sources,' :'))) x)))

  but as you can imagine passing in the function ds.sources has failed, returning "ORA-00904:"DS".» "SOURCES": invalid identifier.

  I'm sure I can solve this problem in a loop, but that seems inefficient.  Anyone know of a method by which I can pass the content of the column to the table function (in_list ()) for each line?

  For someone else it may call a function table in several lines, here's what I came with.  First of all, I changed my data to test a bit to add some very incorrect values.

  setting a day from sources set data_source = 'A:B:C:X:Y' where data_source_id = 1;

  This query will not return a list of lines that contain invalid values, including their wrong value:

  Select the rowid, sources, column_value

  de)

  Select the rowid, data_source sources)

  x cross table junction (utils.in_list (x.sources,' :'))))

  where column_value is not null

  and not exists (select null from data_source_lookup l where l.sources = column_value)

  AABk3MAAjAAAKd8AAA A:B:C:X:Y X

  AABk3MAAjAAAKd8AAA A:B:C:X:Y Y

  AABk3MAAjAAAKd8AAB A:B:C:X X

  AABk3MAAjAAAKd8AAE Y Y

  With this work, I can then modify cela a little bit to turn it back in a delimited list bad values that I can put in the error column.

  Update data_source x 2

  ERROR_MESSAGE = value

  (by selecting bad_value in)

  Select RID, "Invalid Data Source - ' |" listagg(column_value,':') within the Group (column_value control) bad_value

  de)

  Select the rowid RID, data_source sources)

  x cross table junction (utils.in_list (x.sources,' :'))))

  where column_value is not null

  and not exists (select null from data_source_lookup l where l.sources = column_value)

  (Group of RID) where rid = x 2 .rowid)

  where x 2 .upload_id = 1

  and x2.rowid in (select RID)

  de)

  Select the rowid RID, data_source sources)

  x cross table junction (utils.in_list (x.sources,' :'))))

  where column_value is not null

  and not exists (select null from data_source_lookup l where l.sources = column_value))

  ;

  It works well, and I find myself with:

  Error sources

  Source of invalid data in A:B:C:X:Y - x: y

  Invalid Data Source - X A:B:C:X

  C

  B

  Valid source of data Y - Y

• Why pictures matter the size in pixels wrong?

  I have an image which is 700px, and when I import it comes to 160px to 100%? I have to jump up to about 300% so he could adapt my page layout? I triple check the size of pixels in Photoshop. InDesign give me rabies!

  If you design for screen and that you don't want your images scale when you place them, save them to 72 dpi.

• Change the shape of pixels in illustrator

  Hello!

  I was wondering if someone might be able to give me some advice on how to change the shape of the pixels in an image to a form of pixel custom in illustrator.

  Thanks in advance.

  Wittyhearts,

  You asked:

  Is there anyway that I might be able to do without having to repaint each of hearts?

  Yes, if you don't mind that the filling is pixel based.

  Jacob steps to create a grid of heart on top of your image.

  Ensure that each heart is the size of the "pixel" expanded. (If you do this enlargement in Photoshop, use the closest neighbor to get hard edges for each "pixel").

  Make sure that the hearts grid is aligned with the large image pixel grid.

  Fill the black heart. Select them all and group together them.

  Select the heart and the picture below, then click the mask in the transparency Panel. Check the Invert mask option.

  This should be the result (I added black background).

  

  I just thought that it would be even better to convert the First image of a mosaic of vector: menu object > create object mosaic...

  Then create the grid of heart and make a mask.

  When you go to object > flatten transparency and all of the Raster/vector slider to 100, you will get the colorful vector-shaped heart