The installation fails, how to fix?

Similar Questions

• Remove VMware completely when the installer fails - HOW?

  I had VMware Workstation 8 works fine on a 64-Bit machine of Windows 7.

  I bought 9 Workstation and tried to install it, and he says that he should uninstall version 8.

  Well, it failed.  Now, I can not install ANY version, version 7, 8 or 9, all versions.

  The installer is apparently unable to deal with an error to uninstall an earlier version. Why?

  [at this point, Monday, December 17, 2012, it is all fixed with VMware technical phone support. It involves several

  steps and a key was to use the utility Fixit from microsoft from here: http://support.Microsoft.com/kb/2438651/en-us

  and 1308 VMware knowledge base article http://KB.VMware.com/kb/1308 .

  Microsoft fixit scanner not found VMware, but she showed 'unknown' (or other?) and VMware

  technical support took the key to the article above of 1308

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6} HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

  Paste in the registry key when asked by the fixit utility

  {0D94F75A-0EA6-4951-B3AF-B145FA9E05C6}

  Who noted a mistake and fixed it.

  My options are:

  1 reinstall the Windows operating system and start from scratch (which will take a few days to catch up with installed programs).

  NOTE: DON'T DO THIS WITH THE SUPPORT OF VMWARE

  2. remove all vestiges of the previous installations of VMware so I can install without being told that the installer has found another version.

  NOTE: THIS WAS DONE BY THE TECHNOLOGY WITH THE HELP OF THEIR CONTROL PROGRAM REMOTE

  ------------------------------------------------------------------------------

  They have the option "/ clean" on the installer, which does not work, but it must do what he pretended to do so, remove all previous keys and elements.

  What a VMware solution that fixed what well Setup obviously cannot fix. It should prepare my computer so it will NOT report versions of VMware if I can install two versions 7, 8, or 9.

  -------------------------------------------------------------------------------------------

  With the help of VMware support, they were able to completely remove VMware and install VMware 9. I'm going to

  to try to writeup that they did, but the solution took about 30 minutes and many find and remove the

  Directories of VMware.

  I now have version 9 installed and it works fine.

  Post edited by: jeff92677 - TO EXPLAIN THAT THE PROBLEM IS SOLVED, AND THANKS to VMWARE for THE SOLUTION

  This feature was introduced in WS 7.
  Since then WS installers often think that older versions is present - and this happens even on systems that has never ever been before WS.

  On the issue of the port... This is normal. Most of the time it does not configure the port correctly during a first installation.
  You have installed Skype? -Make sure that remove you it temporarily.
  Then stop vmware - pass manually - change the
  C:\Documents and Settings\All Users\Application Data\VMware\hostd\proxy.xml
  -use an equivalent path for win7 of course - so that it uses the port you want.

  445

  Then restart vmware - pass and it works hopefully

• I entered incorrect information during the installation. How to fix it.

  During the installation of windows xp pro, I was asked my name, then the name of the computer (don't remember if it was a part of the whole upward to the network or whateer domain).  Now there are files under my documents that are appointed;

  Administrator (it is fine).

  All users (it is fine).

  All Users.Windows (where it comes from and how do I get rid of it).

  Default user (it is fine).

  My name (it is fine).

  My name of Name.Computer (again, where it come from and how do I get rid of it)

  I install XP on systems of the House several times that I can remember, but I never encountered this problem.  I tried to delete the folders and it is said that they are system files and cannot be deleted.  I guess I could reinstall windows and go through the hassle of revalidation and explain to MS that it is the same computer, but I would avoid it if I could.

  Thank you

  Nathan

  The directories "Users.Windows" and "Name.Computername" are examples of directories that are created after a corrupted profile.  When a new user (for example, "MyName") is created, then you will find a "Myname" folder in "Documents and Settings".  If the profile "Myname" is damaged, Windows will create a new profile "MyName.Computername" and start to using them, leaving the old profile.  You can get the date in your profile corrupted by using one of the following methods:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  If you have the data recovered from the corrupted profile and you want to delete the damaged profile, and then you must do the following:
  Right click on "My Computer"-> properties-> Advanced (Tab)-> "Settings" (in the user profile Section)
  Then you should be able to select the profile that you want to get rid of and press 'delete '.
  Note that if you have both 'MyName' and 'MyName.Computername' writings, the "myname" is without doubt the deceased profile and "MyName.Computername" is probably the active profile... Make sure that you remove the right pair.

  HTH,
  JW

• The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

  Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

  HI Pauld48784098,

  It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

  In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

  Best,

  Del

• Z210 Workstation: EFI Image Restore failed - how to fix?

  Some time previously, I installed a Win 7 64 bit OS to my Workstation Z210 manually using a MS. installation disc Then after a few other software installs and the mandatory and quite large OS updates that occur over time, I recently created a System Image on my USB HDD. I did not worth creating a startup of system repair disc, as I already had one from another system to Win7.

  Now under the prepairing to sell this system, I thought I would try to restore the image of HP using HP Z210 recent system recovery disks. Unfortunately, just like a few years ago, the process failed with an unknown error after reboot.

  No problem, I thought, since I got my Image from the previous system MS Win7

  I tried my old boot system repair disc and I could see that MS Win7 system previous Image (represented by an EFI image) on my USB HDD. Unfortunately the image could not retrieve specifically, it failed with the message:

  Windows cannot restore a system image on a computer with a different firmware. The system image was created on an EFI computer and this computer is using the BIOS.

  So I checked this disc repair system and as suspected, it has only \boot and \sources directory and the file "bootmg" while MS Win7 install disk has the directories boot, /efi and /sources (amoungst a couple more) and the files 'bootmgr' and 'bootmgr.efi. Obviously MS decided that a system repair disc only has BIOS to start creating an installation on a system BIOS. Why MS would create such a frustrating limitation that I don't know

  OK, simple solution would be to install Win7 MS EFI boot disc. So, insert my MS Win 7 installation disc in the DVD drive, restart and press F9, select source of boot EFI "hp CDDVDW SH-216AL" and press ENTER, the first message "press any key to boot from the CD or DVD... ». (This process should start the EFI to the installation DVD). Then the popup "Install windows" appears then I selects the appropriate time/currency area, click NEXT and select REPAIR...

  Sounds simple, but it's a clumsy, such process designed by MS and I always get an error. Specifically, I get the following message:

  This version of system recovery options is not compatible with the version of windows that you want to repair. Try to use a recovery disc that is compatible with this version.

  Thinking that there is some inconsistancy somewhere, I wipe the HARD drive (deleted then recreated the raid volume) and try again, but all I get is the message first or second start EFI or BIOS feature...

  Don't know what type of volume (MBR or GPT) the raid creation process creates and if this has something to do with the problem

  Anyone know what may be the problem and how to fix it?

  Well, it seems that somewhere between the use of the HP system recovery discs and or the key CTRL-I raid removal volume and recreation, I'm probably done with a MBR partition on my HARD drive. And it seems that den of the system doesn't seem to like the MBR with basic images EFI partitions

  I solved the problem by EFI boot my drive MS Win7 install via F9 Boot Manager and start the installation process. Once the HARD drive has been formatted and files began to be copied on the HARD drive I had the power to force button shuts down the system. Then I still started EFI MS Win7 disk install via F9 and as previously made my way to the REPAIR option where I could see my system on the USB HDD Image. However, this time, he took the image and proceeded to again restore MS Win7 created the partition on the raid volume that I had created earlier.

  Not really "QED", but rather a roundabout process fix MS poorly designed the system recovery process...

  Frankly, the system repair disc must always have independent MRD/EFI startup options of the system it is created from. And repair of the system should ignore the partition types when you crush the HARD complete with a picture disc. In addition, the boot disk message «press any key to boot from the CD or DVD...» "Please indicate an EFI or MBR before you start word. Anything less just adds to the confusion and having to jump through hoops to get around this madness is just silly

• The installation failed. PC broke down, installation in a new

  My pc broke down and I am trying to install Adobe Illustrator CS5, I bought a few years ago and the installation fails. What can be the reason? The serial number is accepted, but is it possible that it only works in a pc? What to do when the brokes down pc, you lose the license? Thanks in advance for your help.

  CD-ROM or by download does not matter.  Follow my instructions to get through the issue of the cat, but, unfortunately, there is no chat/phone support available from Adobe for older products to offer activation resets - and I hear that they are reluctant to that as well.

  The first link below can be identical to the one you mention, maybe not.  I'm adding one for bear.

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• The iphone needs to cool down before using the flash? How to fix?

  The iphone needs to cool down before using the flash? How to fix?

  Try to close the application or restart the phone camera. See ol-down-before-you-can-use-the-flash/ http://leimobile.com/ios-4-3-camera-bug-flash-is-disabled-the-iphone-needs-to-co.

  TT2

• My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this

  My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this

  You will need to have the device examined by an Apple store or Apple authorized service provider.  He may ask you to replace your device.

• After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture. What could be the problem and how to fix?

  After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture.  What could be the problem and how to fix?

  Hello

  Looks like a loose connector or a short circuit in the video cable. Check with a real
  store computer (one that works on computers cell phones internal ASUStek) or ASUStek
  Support, their documentation and online in their forums.

  Not a maintainable question by the user.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this?

  Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this? I am writing an essay and I know I misspelled words it contains, but the red line will not work. What should I do about it?

  Hi Brittany,

  You use Microsoft Word?

  If you use Microsoft Word, you can post your request in the Forum Office for assistance.

  Microsoft Office Forum

• Code 80070005 that I tried to install a update for my HP w1907 wide LCD monitor since I got this computer last year, but the installation fails every day.

  I tried to install a udate for my HP w1907 LCD's wide screen since I got this computer last year, but the installation fails every day.

  Thanks for the clarification, jackfrompa. If the monitor works to your satisfaction, then I see no reason to update his driver unless there is a Security problem with the current driver.
  I can't find info list of video drivers of HP being a security risk.
  Is the latest driver display on the site of HP for Vista Premium 32 bit for the HP w1907 19 inch Widescreen LCD Monitor

  Version: 2.00 Rev a.
  October 16, 2008

  There is also a driver for LCD 19 inch HP w1907 screen available for Vista which was released in October 2008 with the same Version, but I don't know if it is the same driver for the HP w1907 19 inch Widescreen LCD Monitor.

  If it helps, here are the steps from HP for a monitor driver installation in Windows 98, Me, XP and Vista .
  MowGreen Services consumer safety update

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  It will be useful.

• can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  Your keyboard is set to french. To resolve this problem, look at the right hand of the bar at the bottom and you will see a keyboard. Click on it and press U.S..
  I hope this helps.