the installation program does not PowerPoint.en-us\PowerPointMUI.msi.

Similar Questions

• shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

  When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

  Hello

  Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

  Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

  Shlomi

• Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

  An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

  After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

  A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

  The installation program does not run.

  At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

  HP after reclamation / question without help until today.

  Dieter Jansen

  Hello

  I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

  For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  I am trying to install the 2007 Office Suite on a computer windows vista laptop.  In the middle of the installation the following code appears:

  The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  What should I do to complete the installation.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Officejet Pro L7590 - cannot scan - the installation program does not scan Betacam

  I have a HP Officejet Pro L7590 all-in-one connected to my iMac OS X Lion 10.7.4 running, and I can't Scan functionality.

  When I set up the device, it does not recognize that there analysis ability, if I try to scan from the Preferences/Print & Scan window there is no option to do so.

  Also, the HP utility displays no information on digitization.

  When I try to run Scan Manager device HP HP Scan Pro application opens then immediately crashes.

  I tried to reinstall the HP software, but it makes no difference.

  Scanning has worked in the past with the same printer, but not since I installed Lion.

  Suggestions welcome! Thank you very much

  Hello

  The application of HP Scan Pro for Mac OS X 10.4 and 10.5, so it seems you are using older software which are not provided for Lion.

  Please remove completely any HP software installed using the scrubber tool:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  To avoid any problems due to the use of the software, be sure to repair disk permissions before you reconfigure the printer:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Go into System Preferences > print & Scan

  Click on the sign more and select your printer.

  The latest version of the software for your operating system will be downloaded automatically.

  If the software download fails for any reason, download and install the latest drivers 2.9 HP printer:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg

  Now add the printer by following the steps above.

  Below you can find what scan methods can be used with Lion OS x:

  http://support.HP.com/us-en/document/c01910186

  Kind regards

  Shlomi

• The installation program does not start

  I have a copy of Photoshop 7 I used on a previous 64 bit system that recently crashed. When I try and install it on the new system (core i7, 32 GB ram, ssd hd) the Setup program does nothing. I see running in the process, but nothing shows up on the screen. I also tried running it as an administrator with the same effect. Any ideas on how to fix it?

  You can use ps cs2, error: Activation of the unavailable server. CS2, Acrobat 7, pass a hearing 3

• The installation program does not house or apps

  I installed my OS to 10.8.5, and now the installer of creative cloud does not house or apps.

  Hi Erin,.

  Please uninstall CC Office and install again:

  1. go in Applications/Utilities/Adobe Installers and uninstall Creative Cloud desktop

  2. go to Applications/Utilities and search Adobe Application manage the file and move it to the trash.

  3. run the CC cleaning tool and search for any trace of AAM. If necessary withdraw:http://www.adobe.com/support/contact/cscleanertool.html

  4. go to Libraray/Application Support/Adobe/OOBE and rename to OOBE.old

  5. download and install the CC Office since the indicated link:https://creative.adobe.com/products/creative-cloud

  Please let us know if it worked.

  Kind regards

  Baudier

• Why the 2011 State reg Highway parameters are incorrect and to run the installation program - does not work

  Highway 2011 inserted from the original disc. Indicates that the registry files have been copied incorrectly and that the installation must be executed again from the original source.

  Disc reinserted after repair, yet no different, remove program and reinsert and the message reappears. The program was OK when it is used first on 24/10/11

  and the fault appeared later that no other programs have been added since. Thank you

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  Also, try to contact the highway help and support site and check if it helps.

  http://www.Microsoft.com/UK/Autoroute/support.aspx

• How do we install updates when the installation program does not work

  Whenever I try to install the updates, I get to the page 'Please read the license terms' and 'Next' is not available.

  I've been in contact with Microsoft about this before, and an engineer has spent half of the day sorting - and it is still the same!

  Help, please!

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• Reinstalling windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd.

  Setup cannot copy files?

  I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.

  migregdb.ex_
  icwconn1.ex_
  ICWCONN2.ex_
  INETWIZ.ex_
  icwhelp.dl_
  icwutil.dl_
  icwrmind.ex_
  ICWDL.dl_
  icwx25a. COURIER
  icwx25b. COURIER
  icwx25c. COURIER
  ICWIP. COURIER
  Phone.ic_
  Phone.ve_
  State.ic_
  MSICW.is_
  MSN.is_
  support.ic_
  Msobshel.ht_
  ISIGNUP.ex_
  icwtutor.ex_
  icwres.dl_
  trialoc.dl_
  Oobeinfo.in_
  Oemlogo.gi_
  Mouse.ht_
  ISP.ht_
  Oempriv.ht_

  I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?

  JOEY

  To the file copy stage of the registry would be game.  It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.

  John

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• tried to install creative cloud but the installation file does not work.

  tried to install creative cloud but the installation file does not work.

  the installation window is suddenly turned off.

  What can I do?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

  I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

  Is the serial number a 24 digit code?

  It is best to contact the Support from Adobe and check with the serial number once:

  "Click the button still needing help, and then select the Chat option:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_account-settings _stillNeedHelp

• How can I fix - Error1321: the installation program has not sufficient privileges to modify the file C:\Program Files (x86)\Adobe\Reader11.0\Readerwow_helper.exe.

  I am trying to download Adobe Reader free software and I get the message Error1321: the installation program has not sufficient privileges to modify the file C:\Program Files (x86)\Adobe\Reader11.0\Readerwow_helper.exe. I don't know how to solve this problem.

  Koncar, salvation

  
  

  Please try the steps mentioned below.

  (1) download the Adobe Reader.msi of ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/

  (2) run the. MSI for player and when you get the error, click Retry and installation would be hollow.

  
  

  Thank you

  Vikrantt Singh