The interface when the insertion error

Similar Questions

• ignore the insert errors in a merge statement?

  Hi all
  
  I wonder if it is possible, somehow, to ignore the failings of the insert statement in a merge statement of bulk? The error encountered is the violation of a primary key. What is happening is that the different transactions share the same plsql procedure. Therefore, it could happen that different transactions will try to insert two rows with the same primary key.
  
  MERGE INTO table
  Using the collection
  WE (table.id = collection.id)
  WHEN MATCHED THEN
  UPDATE...
  WHEN NOT MATCHED THEN
  INSERT...-> it may fail for duplicates here
  
  The only solution would be to use 'updated massive day + bulk insert (ignore errors)' instead of a merger in bulk?
  
  Any help is very appreciated,
  WF

  What about using [DML Error Logging | http://www.oracle-base.com/articles/10g/DmlErrorLogging_10gR2.php#merge]?

• Insert the CK error | CKM | Check constraint is not picked up by ODI11g

  I'm trying to hit a stage in CKM 'insert error CK' and it is always checked "run" and there is not so other condition in the code

  I've created an interface that has activated the Frother and target constraint check (no constraint check in ODI datastore)

  Now how should be my designed interface for my "insert error CK' step executed?

  Sorry, I wrote too fast on this one, I'm not sure of the Oracle RKM's check of reverse engineering constraints. It may be only PKs, FKs and constraints not null.

  CHECK in ODI constraints are called "Conditions". You can add it by expanding your data store in the left pane and right-click on the constraints:

  

  Kind regards

  JeromeFr

• When I insert a CD of the application, I get the error message - 'windows cannot access the specified device, path or file. You may not have access to the item. I tried pretty much everything including a new CDROM and loading on safe mode.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Mefrombigd,

  1. it happens with all types of CD?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. you receive the error message when you insert the CD into the CD drive?

  Method 1

  Check if you can access the contents of the CD using Windows Explorer application.

  (a) click the start menu, and then double-click computer.

  (b) make a right click on the CD drive, click Open.

  (c) check if you can access it.

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't activate Windows 7, when I insert the product note key, which is an error 0xC004F063 problem code. What do I do?

  I can't activate Windows 7, when I insert the product note key, which is an error 0xC004F063 problem code. What do I do?

  Boost telephone:

  Activate Windows 7 manually:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. Select the telephone activation option and brace yourself for a real person.

  This is the Forum for Windows Update.

  You will get the best help for any problem of activation in Windows 7 install, upgrade and activate Forum. the link below:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads>

  UTC/GMT is 23:41 Friday, January 20, 2012

• How can I get rid of the error code 0 x 80010108 when you insert the SD card

  My SD card is good and I can access images using my computer to start up. I can also see my saved photo gallary pictures. What I can't do, is when I insert the SD card and select images I get the above error message. Help.

  I would say that you have two choices,

  Photo Gallery of windows open before inserting the sd card,

  Then click on import, then insert the sd card.

  Or you can click on the Start button and click computer.

  Insert the sd card,

  He appears as a removable disk that you can right click and click Open,

  Then manually, copy and paste the files in a folder or an existing one,

  Do not use auto play close the dialog box or use the Windows Explorer instead.

  Oops, that's three choice :)

• Error Msg When you insert the disc to the software for a printer

  I get the same error msg when trying to install a lexmar x 2670.  «E: / is not a valid Win 32 application.» Last week, I tried to install a new HP printer and kept getting "%1 is not a valid Win 32 application."  How can I fix it?

  Hi BarbWat,

  Which version of windows vista you are running on the computer? What type of system (32-bit or 64-bit)?

  This problem may be caused by one of the options below.

  1. the package is corrupt, missing, or bad.

  2. the software is not designed for your version of Windows.

  I suggest you try the following steps:

  Step 1: The Setup file may be damaged or missing, check that the CD is clean.

  Step 2: If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  You can manually download the Lexmark software, please click here

  Make sure you download the correct version (32-bit or 64-bit) for your computer.

  If the problem persists, you can check with Lexmark.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  To check if your computer is 32-bit or 64-bit, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  You can follow the same steps to solve the problem of HP printer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• When I insert the camera memory card into the SD/MMC slot, nothing transfers

  Original title: camera to computer Trouble

  When I insert the camera memory card into the slot SD/MMC, no transfers.  Do I need to connect the camera too?  If so, why?  Thank you.

  Hi Paula Sommers,.

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  ·         What is the brand and model of the computer?

  ·         Did you try to connect to the memory card on another computer and check if it works?

  ·         You get the error message?

  ·         Memory card not detected on the computer?

  ·         You use any application to transfer files from a memory card?

  ·         Were there any changes made on the computer before the show?

  I suggest you to follow the steps in this article and check if it helps:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• Nothing happens when I insert a San disk in the drive

  Original title: JONANDERSON_703
  When I insert the San disk in the drive, nothing happens.

  Hi JOHNANDERSON_703,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like your San drive is not getting recognized in Windows Vista.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?

  2 is the issue limited only when connecting San drive?

  3 is the another USB device works fine?

  4. do you get any error message or connection error code car san?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  My drive does not appear in Windows Explorer: http://support.microsoft.com/kb/330140

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• computer says please insert a disc when I insert the dvd

  computer says please insert a disc when I insert the dvds:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• When I insert a memory card to upload photos or whatever when windows opens, it opens the card very well, after I delete and insert the other, there are no drivers or anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: help

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Ideas: help

  =========================================
  When you insert the second memory card and nothing happens...
  try to go to start / computer and see if your drive is
  recognized as one or more hard drives. You might see
  something like:

  Removable disk (e :))
  Removable drive (g)
  Removable disk (h :))

  One of these drive letters will connect on your memory card and if
  you right-click and choose explore, you should be able to see the
  Directory of the card and upload your photos.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Close an interface based on the CRC errors

  We have 4510 with double 10 gig links to 6509.  When one of our interfaces begins to accumulate the crc errors its impact on latency and availability of our users behind the 4510.  Either the interface err - disable or manually stop us it and the other link 10 gig is unlocked by spanning tree and the traffic starts to flow as usual.  Is it possible to use the EEM to detect these errors and entry of the crc and stop the interface?

  I'm looking at the below as resolution:

  Te5/1 trap to bypass authorization event manager applet

  "event TenGigabitEthernet5/1 setting input_errors_crc entry-op name interface entry-val 0 entry value output-comb type or output-gt exit-val 0 exit value type op - the exit time 5000 output-event-polling interval of the true 100 maxrun 10000.

  action 1 cli command "configures terminal.

  Action 2, command cli "te5/1 interface.

  Action 3 cli command "shutdown".

  An EEM applet will work for you, but the way you have it designed could not do what you want.  Try this:

  authorization of monitor_te51 event handler applet work around

  event interface name TenGigabitEthernet5/1 setting input_errors_crc entry-op gt entry-val 0 increment type entry exit-val 0 out of operation eq output-type increment

  command action 1.0 cli 'enable '.

  Action 2.0 cli command "config t.

  Action 3.0, command cli "int DUREE5/1.

  action 4.0 'closed' cli command