The JPEG - uncorrupted file marker segment length error

Similar Questions

• Error message: could not complete your request because a jpeg marker segment length is too short

  I'm subscribed to CS 2015.  Because I was frustrated trying to learn Lightroom, I stepped back on uploading my photos in Bridge.  Trying to open photos in Photoshop, the subject error message suddenly appeared on one of the 43 000 files that I have on a disc hard Ext. WD.  I used my subscription of several months without any problems.  A google search for others with the same problem found several during the last years and the answer seems to boil down to "the files are corrupted" and not data solutions.  I was very upset.  Tried several times with the same error message.  Today, I tried again and the bingo-test - everything works beautifully.  I am relieved but worried it will happen again or that I did something to cause this error message.  I'm not a person tech so if anyone can give me an idea on this issue, I would be grateful.  I backup to another hard drive, but he was afraid to open CS2015 files are going to be corrupted.

  Since you got the error before, but not at the moment, it doesn't look like a fault on an intermittent basis by car.

• "Cannot find the locale data files. Please reinstall"error message in windows live mail

  My wife's computer keeps giving this error message when it tries to open all links in the emails. I tried everything I can think of without success. I even tried to re - install Windows 7, but the disc does an upgrade or a NEW installation so I can't FIX the o/s.

  Is someone know what is the problem and better yet, HOW to fix?

  Chris

  I finally solved it.

  The problem is that for some reason Google Chrome had corrupted, result links via Chrome (default program) do not. We reinstalled Chrome and it now works fine.

• I can´t download cloud creative, because a window that says error 204 appears, but I Don t know what file does not allow me to download the program or file is Miss

  I can´t download cloud creative, because a window that says error 204 appears, but I Don t know what file does not allow me to download the program or file is Miss

  Error 204 https://forums.adobe.com/thread/1492846

• How to unload the external .swf file when pass the other section?

  Hello

  The following code provided by Mr. kglad works very well to load an external .swf file on stage. Now, when I click on Contact (button), the file external .swf to disappear completely. How to encode on contact (button) to get by.

  Gallery.addEventListener (MouseEvent.CLICK, GalleryClick);

  function GalleryClick(e:Event):void {}

  If (currentClip! = Gallery_mc) {}

  currentClip.visible = false;

  Gallery_mc. Visible = true;

  currentClip = Gallery_mc ;}

  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, ClipLoaded);

  Loader.Load (new URLRequest ("Gallery.swf"));

  function ClipLoaded(e:Event):void {}

  Gallery_mc. AddChild (Loader);

  Loader.x = 0;

  Loader.y = 120;

  Loader.Width = 1000;

  Loader.Height = 700

  }}

  I tried the following code for Contact_btn unload the Gallery.swf file that launches an error message: 1120: access of undefined property loader.

  Contact.addEventListener (MouseEvent.CLICK, ContactClick);

  function ContactClick(e:Event):void {}

  If (currentClip! = Cotnact_mc) {}

  currentClip.visible = false;

  Cotnact_mc. Visible = true;

  currentClip = Cotnact_mc;

  Gallery_mc.removeChild (loader);}}

  unloadAndStop() is supported by flash player 10 or higher (fp 10 +).

  p.s. Please check the useful/correct, if there is.

• questions of text search with the encoding of file whlang.js

  I was wondering if anyone else runs into a problem where a javascript error prevents the search function in the work webhelp output. The production and research was working fine a few weeks, but has recently stopped working.
  
  I get the following error of each browser that I can try help:
  Online: 265
  Char: 18
  Error: Constant not terminated string
  Code: 0
  URL: < path > \WebHelp\whfbody.htm
  
  There is nothing wrong with this file, but looking into the .js files, he calls, I discovered that the whlang.js file contains a few errors. The first is that the termination (I think?) characters '; are on a separate line as the string constant:
  
  gaFtsStop [60] = 'over '.
  ";
  
  The second error is point 63 article has an unknown character in it instead of an 'o', as the browser is read as gaFts Stp instead of gaFts stop.
  
  When I corrected these errors, the search function works fine. The problem is, I don't know why RoboHelp is the production of this file with all these mistakes, and why it does now when it used to work perfectly. I can't find anything on the web or in the RoboHelp help on this, so I wonder if anyone has one) come on b) fixed and c) obtained RoboHelp to stop writing a file broken.
  
  Help, anyone?

  YBacon,

  Welcome to the forum.

  I saw the phenomenon of online split before, and Yes, it confuses the js code that uses it.

  The original whlang.js file is
  C:\Program Adobe RoboHelp 7\RoboHTML\Help\en_US

  or, if you do FlashHelp,
  Adobe RoboHelp 7\FlashHelp SDK\Help C:\Program

  First check in these files. My guess is that you will find nothing wrong.

  It is the default value for 'Stop' and 'Ignore' lists in .stp and .ign updated project files when you add words or phrases under the project settings > advanced.

  If the models are good, rename or delete the projectname.stp file in the project directory. HR must re-create a default version. Even if your examples are in the stop-list, maybe the projectname.ign file is involved.

  Harvey

• I can't save a picture of me as a photo account. It comes out there's an error in the recording of the jpeg file. It is in 'Downloads' and 'Documents' in the finder of my iMac 27 5 k. Can someone help me? Should I change extension or what?   Thank you

  I can't save a picture of me as a photo account. It comes out there's an error in the recording of the jpeg file. It is in 'Downloads' and 'Documents' in the finder of my iMac 27 5 k. Can someone help me? Should I change extension or what?   Thank you

  What program Adobe do you use that you have problems with? I can put your question in the help forum.

• In XP error message - unable to locate the RUNdll.exe file when trying to open Microsoft files.

  Original title: just had a fight with the virus 'Windows XP security 2011.

  I am running Windows XP Home Edition and managed to get rid of the virus, but now I can't open any microsoft file. that is, control or any downloaded files Ms. I get an error message that it can't locat the RUNdll.exe file. How to solve this?

  Thank you aleweeks

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.

  This isn't the answer.  ---> pay attention -------------------------------------------->

  It's time to mark the answer but:

  This "response" meets or exceeds the requirements of Microsoft Answers forum for an "automatic response":

  1. support the answer of engineer or a moderator that is impossible, probably not or will not solve the problem
  2. marked as the answer by a comrade moderator
  3 contains a link to one or more Microsoft KB articles
  4. no activity for 5-10 days

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 0 x 80070052 as it is impossible to create the directory or file

  I am copy photos in the photo gallery of a folder/tag for a scan of the disc.  I have a file of some 140 photos which does not copy.  Others have copies with no problems.   I created a folder with all the photos I want to copy.  When they begin the process, all go but those of this group in particular.  I get the above error message.  Please tell me what I would do, I succumbed to the last 1.5 hours to resolve myself.  Happy new year!!

  Kelly

  My next try to discover what was going on would be to check the location of the files. A folder root drive can contain as many files, (depending on the file system used, such as Fat32 or NTFS). I wouldn't count the number of files successfully in the root and see if you're on that, based on the constraints of the file system. When you click right a drive and properties, it shows the file in use for this drive system.

  Errors creating files or folders in the root directory:

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Do not open the JPEG files recovered...

  I have quick formatted my E drive. Then I restored data with software. But do not open the JPEG files recovered.

  The size of the file is the same. But when I try to open the error "invalid image". I tried almost all viewers but the problem is the same.

  How can I open these JPEG files...?

  Help, please...

  Thank you

  You can try the JPEG recovery tool, it might be useful. This is normally due to the change in the location of the file once you retrieve the data.

  http://www.hketech.com/JPEG-recovery

  CheersJ

• When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected

  When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected. How can I solve this problem? Thank you for your time, Shawn

  You may not have the correct permissions or own the medium on which you try to perform the backup.  Here are some instructions on how to give you the right permissions and Take Ownership (if necessary).

  To view your permissions, right-click on the file/folder/drive, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/. In this csse make sure grant you full permissions and check also advanced special permissions (including the inherited permissions) which can substitute for this entry to limit your rights by assembling as well.

  To resolve this problem with folders or drive, take possession of the records or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 0 x 80070052 cannot delete the folder or files

  Error code 0 x 80070052 has give me a lot of problems. Now I'm unable to delete files and folders.  I am running window 7.

  Hey Kay59,
  To start here is a patch to fix the folder settings and rights:
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/
  Then, I pulled a thread I think that will contain some great resource. You must take the time to read through and try the steps indicated by the Mark.Look through this thread and try some of these steps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/error-0x80070052-the-directory-or-file-cannot-be/89b2981b-B707-4C1E-9227-89ad139efe9e
  If you have any questions, return to this topic and explain what were your results. Be sure to include all the details that you can when you describe your results.
  Thanks for posting of Microsoft Answers! Good luck with the troubleshooting.

• Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

  Hi all

  This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

  6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

  However, I have not been successful transfer the file to the controller for the upgrade.

  I have tried everything I know:

  * transfer the file of different programs including tftp32d and solarwinds TFTP server

  * transfer the file of different applications such as FileZilla and FTPD FTP server

  * transfer the WCS web interface file

  * running a direct connection to the WLC with a static IP address on the interface

  * verified that there are no interfering firewalls with transfer

  * adjusted times waiting and pads as a result

  I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

  The transfer reachers about 97MB before it fails.

  Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

  I feel I forgot something...

  # #debug transfer all out #.

  * Did not write body

  * Only partial file received: 97086398 bytes

  * 23:55:26.248 Mar 06: ftp operation returns 23

  * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

  MSG = unknown error - refer to log

  * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

  O log)

  * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

  error - refer to log

  * 06 Mar 23:55:26.470: RESULT_CODE:12

  * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

  on

  * 23:55:26.577 Mar 06: finished remove

  % Error: Code of file transfer failed - unknown error - refer to log

  #############################################################

  Here's my output sysinfo sh.

  release of sysinfo #show # #.

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 6.0.196.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA,

  1.27

  Build Type....................................... DATA + WPS

  Name of the system... WCS_01

  Location of the system... G5

  Contact System...

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  IP Address....................................... 10.1.0.17

  Last Reset....................................... Software reset

  Time system... 0 days 0 h 53 min 10 dry

  Location of the time zone of the system...

  Base boot license current level...

  Current license type Boot... Permanent

  Next time you start level license... base

  Next Type of license to Boot... Permanent

  ###############################################################

  Any suggestions? Am I missing something?

  Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

  So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• corrupt attribute of the file record segment 117122

  During startup, I get an error message saying that the PC is removal of a corrupt file record segment attribute 117122. PC mentioned 3 steps of repair. He mentioned that some type of difficulty 128.680DD2F1 AND 128.7B89E8AO as well as a series of other numbers.

  I come back from a trip where I used 2 public networks. I have a virus checker - which may explain why the PC tries to repair itself.
  I'm afraid just because after this repair the computer will work fine until I have shut it off and restart again. Then the same thing happens. The repair takes about 20 minutes.
  Any ideas or suggestions?

  Hello

  Welcome to the Microsoft community.

  From the description of the problem, it seems that whenever you turn on your computer you get an error "PC deletes an attribute corrupted 117122 file record segment.

  Try these steps and see if it helps.

  Method 1:

  Perform a Startup Repair:
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  Run the System File Checker (SFC) scan and verify.

  File system (CFS) auditor analyzes and verifies the versions of all protected system files after you restart your computer

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  To disable automatic disk checking at the start of Windows through registry, go to the following registry key:

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

  In the right pane, double click BootExecute.

  The default value of the key is autocheck autochk *

  * means that each drive is checked for consistency. Just add /K:C to the end before*. /K switch will disable autocheck on C: drive at Windows startup. If the final value should look like this:

  / k: C to autocheck autochk *.

  If you want to add more drives, the key should look like this: (by disabling the drives C and D)

  / k: D / k: C autocheck autochk *.

  If you want to restore all default, just replace the key with the default i.e.

  autocheck autochk *.

   

  Please let us know the status of the issue after performing the above methods. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.