The KB3174060 applies to Windows 8 RTM?

Similar Questions

• Network disconnects the Tecra M7 using Windows 7 RTM

  I tested Windows 7 since the first versions beta and finally got my driver's license for RTM, but one thing still does not work on the Tecra M7:

  Network connectivity is lost repeatedly during the use of the ethernet adapter integrated Intel Pro/1000 PL.
  Installing latest drivers (06/05/2009,9.13.12.0), everything is put in place, but the DNS appear to be lost.

  Repeatable after putting the computer to sleep and prolonged sleep and wake up - irreproducibly randomly while connected.
  ipconfig/release, ipconfig / renew does the trick then - pull the plug and put it back is NOT.

  Somtimes, ipconfig doesn't solve the problem for a few minutes - in this case, only a reboot help

  I have two machines, same model, both show the same problem - tested various networks (managed, public/private, 10Base-T/100Base-TX).

  Anyone have any idea?

  Hello

  After wake up sleep or hibernation mode, you mean the network disconnects automatically?

  I think that it is a software problem
  I remember that Vista and first BONE had the similar problem
  Usually, the update driver and Windows update helped but since Win7 is not official on the market, you will have to wait for official updates and patches

  PS: have you noticed the same thing using the OS preinstalled Toshiba?
  Your BIOS is up to date?

• When you access microsoft technical support, I get a message that the article applies to windows vista and head to the support of windows xp. However, I have installed professional vista

  Microsoft support see my installed OS windows XP. When, in fact, I have Vista for businesses. So that when I click on an article I get a message that the article does not apply to me and that I should see windows xp support

  If you don't mind, double check what Windows do you really.

  If you do not have Vista... Start > computer > toolbar, System Properties > what does say under Windows edition?

  t-4-2

• Cannot delete the bluetooth device in Windows 8 RTM (running on MacBook Pro)

  My office uses Macs but allows employees to use BootCamp to run both environments. I was able to add a pair of headphones bluetooth without problem, but now can't remove them in order to re-pair.

  The event viewer shows:
  Withdrawal of the device node 'BTHENUM\Dev_001816064C73\a & 383f14a7 & 0 & BluetoothDevice_001816064C73' failed with error code 0 x 80070490.

  I've never seen that happen before, and can only find references error code 0 x 80070490 Windows Update problems.

  Ran sfc/scannow, but came back clean. Any ideas/suggestions?

  The same thing happened to me when I tried to remove a bluetooth mouse, so that I can add another.

  I tried the above solution presented by Angela T., as he made a lot of sense, but which still has not worked for me and the old mouse maintained reappear.

  The problem I encountered was that I was using the Bluetooth devices icon in the box 'Notifications' from the background toolbar on the desktop (i.e. the lower right part of the screen where things like time, volume, etc., are displayed).
  For some reason, try to remove the mouse open bluetooth devices window through this icon is mess up every time.

  I managed to make it work in the pop-up toolbar that appears when you place your cursor in the lower right of your screen and clicking on 'settings' (the icon that looks like a gear) and then by clicking on "change pc settings" at the bottom.  This brought me to the 'Pc settings' window where I could add and remove devices.  Now when I tried to delete the old mouse and add the new to here, it worked perfectly fine.

  Crazy, I know, but it fixed the problem for me.

• If I installed windows 8 rtm company I can install windows 8 pro at the end of the assessment?

  at the end of windows 8 rtm company can I install windows 8 pro and keep files and programs?

  Hello

  You should be able to keep files and settings, but you may need to
  reinstall your programs.

  To make sure you get check correct information in the TechNet Forums where Windows 8
  Enterprise Edition is supported.

  TechNet - Windows 8 IT Pro
  http://social.technet.Microsoft.com/forums/en/category/w8itpro

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is this version of the Windows 8 RTM or Windows 9 Alpha?

  (9200.16384.WIN8_RTM.120725 - 1247) is this build windows 8 RTM or windows 9 alpha?

  I'm rather puzzled by your question. Even a quick analysis of the designation of building answers the question. Note that, while it is expected that Windows 8 versions will go to manufacturing and MS partners soon, it is not available to end consumers yet. Places where it could be considered to be available are not good sources and involve various risks. In my view, it is better to stick to the version official candidate/preview until you can get the files of good quality of good sources.

  Good luck.

  Tom Ferguson

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• Software that has a compatibility with the windows operating system 8, applies to windows 8.1system automatically?

  I just want to know when you buy a software that has a compatibility with the operating system windows 8, applies to windows 8.1system automatically?

  Former title: compatibility

  Yes, he does.  Windows 8.1 is compatible with Windows 8.0.  In fact, it can run almost all programs built for 7, Vista and XP as well.

• 4 "other unknown devices" in Device Manager. Windows 7 RTM 64 dv7 1450

  Just bought a computer HP dv7-1450 laptop with AMD Turion X 2 64 processors. Installed Windows 7 RTM 64 and everything seems to work except there are 4 unknown "other devices" listed in Device Manager. The 4 devices are:

  -System base unit (x 3)

  -Unknown Device (x 1)

  I have no idea what are these devices. I tried looking for drivers for chipset on the AMD and HP Web site without result. But I do not know if these are the associated chipsets. One of the devices would be the disk fall sensor hard (it does not appear in the device no matter where Manager)?

  Unfortunately on the HP site, there are not many downloads of drivers available for the 64-bit (Vista). I know that Windows 7 64 drivers won't be available until in October, but if there are not any available Vista drivers either, I expect to see all the drivers for Windows 7?

  The most important thing for me is just to know what are these "other devices" 4 and get the drivers installed.

  Thanks in advance!

  ProtectSmart Hard Drive Protection here

• Driver missing in Windows 7 RTM TX2000 coprocessor

  I installed Windows 7 RTM on my HP TX2000 and everything went well, except for a missing 'coprocessor' driver. I did a little research and found several posts that seem to indicate that I need to install one of the Vista 64 drivers manually. I downloaded, extracted, then tried each sets pilot but Device Manager reports it found no compatible driver.

  Is there a new driver for Windows 7? Is there another driver, I can use?

  I finally found the missing driver by a link in another post here.

• No sound on Portege R500 using Windows 7 RTM

  Hi all

  I have the problem of sound with Windows 7 RTM. No sound playback, the microphone works very well and the control panel > hardware and sound > Realtek HD Audio Manager detects whenever a microphone or headset is (UN) plugged.

  Any driver I install and no matter as the playback source (sound system, Media Player, Winamp and others), there is no playback of the sound on the speakers or the headphones. The last I installed Realtek R2.31 is.

  I start to wonder if what happens to be fixed, after all, Windows 7 is to go gold and there is no solution for this problem.

  Hello Paulo

  If you see this section of Win7 you will find a lot of comments but a general message is: Win7 is not published official and drivers Toshiba doesn't offer WIN7 at the moment. When the Win7's official published Toshiba will start Win7 support, and I hope that your Portege will also build.

  This means that Toshiba will offer drivers Win7 on Toshiba download page. These drivers will be tested and it should work properly. Now on US Toshiba support page you can download some drivers Win7 BETA (untested). If you want to check under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

• Re: NB200 - how to get PPV works on Windows 7 RTM?

  If someone finds a way to install the latest version of util_tvap_TC00169400B and the FN & F8 works could they possibly place an update.

  I have successfully installed Windows 7 RTM, with the disk monitoring HARD & Bluetooth all working correctly, but the majority of special FN keys do not work as the parameters without wire volume, brightness, & put into hibernation work.

  Hello

  I think that at the moment you can't do anything. Windows 7 is not released yet and also no drivers or utilities. You must understand that you need to wait a few more weeks because after the release of Windows 7 tools and drivers must be pre-tested.

  If some Vista drivers or tools work on Windows 7 it s nice, but if not you can do nothing.

  Here also a thread similar to this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162103

  Welcome them

• Satellite L350-262 touchpad stopped after the latest updates of windows

  Hi all

  Last Friday, when closing close to 11 updates have been applied to Windows 7 (32 bit). When I got to the top of the laptop this morning the touchpad has stopped working and I had to plug in an external mouse.

  So far I tried to download the driver from the site of Toshiba, uninstalling the driver, reboot and then reinstall the driver and it did not work.

  Not yet opted for a restoration of the system, before I try that someone else had this problem?

  Any ideas on how to cure?

  Thank you

  Are you sure it is not disabled?
  Check the FN + F9 key combination

• Yoga 2 Pro - sleep setting missing after upgrade to Windows 10 RTM

  Here's another interesting event. I use sleep mode all the time, that's what happens "when I close the lid. After upgrade Windows 8.1 for Windows 10 RTM, "standby mode" is not found. "when I close the lid" and related parameters in power management have an empty selection, sleep does not appear in the drop-down list of choices. It seems revenue to "Put to sleep" by default. By reading the other Windows 10 forums I know sleep is supported in Windows 10, how can I get that back? I tried to download and install the latest driver for power management (as dated 17/07/2015, I think) but I get the message that "you already have a newer version of the driver installed", I cancelled out of the facility. Are there newer drivers planned for soon? I can shoot with Microsoft Basic Display Driver (3200 x 1800 only, see my other ad in the forum), although I used a different resolution in Windows 8.1 and hibernate instead of mode 'sleep', but I hope that these features will work soon. Thank you, Bob

  * Sleep is back * after having solved my problem of graphics driver. Fixed. See the thread «driver Intel HD graphics on Yoga 2 Pro fail after...» "for more details. Cheers, Bob

• Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Thank you
  Tony

  Original title: windows server 2008 key

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.