the launch of evil a statement select twice

Similar Questions

• Execute a statement select twice in one sitting, what is happening in the PGA?

  Hi guys,.
  
  Oracle 10g.
  I was just asked while executing a select twice in one sitting, what is happening in the PGA?
  I know that oracle does not need to analyze this statement because of the LMS "library cache", and perhaps not necessary to perform the work of IO because BMG "cache db pads" oracle, but is the first fetch result set cached in the PGA, so that it could be directly returned to the user without doing anything to the LMS?
  I'm not familiar with the details of the structure of the memory in Oracle, that contain exactly PGA?
  
  Thank you very much!

  The results would be extracted once again, not cached. By default.

  However, in 11g, you can try using the CLIENT_RESULT_CACHE (which should work with a sqlplus Oracle client).
  See http://download.oracle.com/docs/cd/E11882_01/server.112/e16638/memory.htm#PFGRF961

  Hemant K Collette

• First PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears.

  Install the 30 day trial version, but first PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears. How to fix?

  Hello

  Go to c: program files * 86:common: adobe: sl hide, rename the cache sl

  Go to c: program data: adobe: store sl: rename the store sl sl old store.

  Right click on first pro and run as admin.

  Thank you

  Arjun

• Statement Select from EPS to a database of the PMDB P6

  I'm looking for a SELECT statement select nodes EPS to a database of P6 PMDB, something to the effect of:
  
  SELECT proj_id
  OF PROJWBS
  WHERE wbs_id In (SELECT parent_wbs_id FROM projwbs WHERE proj_node_flag = 'Y')
  
  This method fails if the EPS has no projects assigned to it yet. What would be best is to find a distinction between a project and a BPA in the project table. Someone has a better method for construction the following select statement?
  
  Tom

  / * Returns the nodes EPS * /.
  SELECT
  wbs_short_name AS 'EPS ID',
  wbs_name AS 'EPS name'
  OF PROJWBS T
  WHERE T.proj_node_flag = 'Y '.
  AND T.proj_id IN
  (SELECT V.proj_id
  PROJECT V
  WHERE V.project_flag = 'n')

• How to store the output of a statement select * statement in a file?

  How to store the output of a statement select * / statement of dsc in a file?

  As user sys:

  CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
  /
  GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
  /
  

  As myuser:

  CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                       ,p_dir IN VARCHAR2
                                       ,p_header_file IN VARCHAR2
                                       ,p_data_file IN VARCHAR2 := NULL) IS
    v_finaltxt  VARCHAR2(4000);
    v_v_val     VARCHAR2(4000);
    v_n_val     NUMBER;
    v_d_val     DATE;
    v_ret       NUMBER;
    c           NUMBER;
    d           NUMBER;
    col_cnt     INTEGER;
    f           BOOLEAN;
    rec_tab     DBMS_SQL.DESC_TAB;
    col_num     NUMBER;
    v_fh        UTL_FILE.FILE_TYPE;
    v_samefile  BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    d := DBMS_SQL.EXECUTE(c);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
        WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
        WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      END CASE;
    END LOOP;
    -- This part outputs the HEADER
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
    FOR j in 1..col_cnt
    LOOP
      v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
    END LOOP;
    --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
    IF NOT v_samefile THEN
      UTL_FILE.FCLOSE(v_fh);
    END IF;
    --
    -- This part outputs the DATA
    IF NOT v_samefile THEN
      v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
    END IF;
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT WHEN v_ret = 0;
      v_finaltxt := NULL;
      FOR j in 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
          WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                      v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
          WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                      v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
          WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                      v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
        ELSE
          v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        END CASE;
      END LOOP;
    --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
      UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
    END LOOP;
    UTL_FILE.FCLOSE(v_fh);
    DBMS_SQL.CLOSE_CURSOR(c);
  END;
  

  This allows the header line and the data to write into files separate if necessary.

  for example

  SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
  
  PL/SQL procedure successfully completed.
  

  Output.txt file contains:

  empno,ename,job,mgr,hiredate,sal,comm,deptno
  7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
  7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
  7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
  7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
  7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
  7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
  7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
  7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
  7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
  7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
  7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
  7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
  7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
  7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10
  

  The procedure allows for the header and the data to separate files if necessary. Just by specifying the file name "header" will put the header and the data in a single file.

• Create the update with joint statement / select

  OK, so here is the real project far East:
  
  Update (select oci.identifier_type
  vhb.offender_id_display
  oci.comment_text
  vhb.offender_book_id
  oci.offender_book_id
  of OIC, HBV v_header_block offender_case_identifiers
  where
  OCI.offender_book_id = vhb.offender_book_id
  and vhb.offender_id_display =: ppid
  and oci.case_id <>: Pärn
  and oci.identifier_type = 'ARN')
  Set offender_case_identifiers.identifier_type = 'ARN2;
  
  below to get accurate data I need to change (checked work):
  
  (select oci.identifier_type
  vhb.offender_id_display
  oci.comment_text
  vhb.offender_book_id
  oci.offender_book_id
  of OIC, HBV v_header_block offender_case_identifiers
  where
  OCI.offender_book_id = vhb.offender_book_id
  and vhb.offender_id_display =: ppid
  and oci.case_id <>: Pärn
  and oci.identifier_type = 'ARN')
  
  So Im trying in the 1st example to change the column above oci.identifier_type = "ARN2", but I get the following error: "ORA-0904: 'OFFENDER_CASE_IDENTIFIERS'. '. "IDENTIFIER_TYPE": invalid identifier.
  
  Published by: 969659 on November 6, 2012 09:53

  msullyguy wrote:
  Initially, to display data before, I run:

  Select *
  from offender_case_identifiers oci
  where offender_book_id = :pobi
  and oci.identifier_type like '%ARN%';
  

  and it returns:

  OFFENDER_BOOK_ID     IDENTIFIER_TYPE COMMENT_TEXT CASE_ID
  * 1 035 481 * DNA * 01554156 * 1 713 565
  * 1 035 481 * DNA * 01554156 * 1 713 566
  * 1 035 481 * DNA * 01554369 * 1 714 912
  * 1 035 481 * DNA * 01554369 * 1 714 913

  After executing your script suggested:

  update offender_case_identifiers ociq
  set Identifier_type = 'ARN2'
  where ociq.offender_book_id in
  (select offender_book_id from v_header_block
  where offender_id_display = :ppid)
  and ociq.case_id != :parn
  AND ociq.identifier_type = 'ARN'
  

  and using the +: ppid = 0000421337 + and +: parn = 01554156 + it changes all identifier_type in "ARN2 '... Here is the result:

  OFFENDER_BOOK_ID     IDENTIFIER_TYPE COMMENT_TEXT CASE_ID
  * 1 035 481 * ARN2 * 01554156 * 1 713 565
  * 1 035 481 * ARN2 * 01554156 * 1 713 566
  * 1 035 481 * ARN2 * 01554369 * 1 714 912
  * 1 035 481 * ARN2 * 01554369 * 1 714 913

  I need to change only the identifier_type in "ARN2" on records that do not have the same value as the entry: Pärn

  I think that we are on the right track, but still can not wrap my head around the solution... once again, I thank you all for the continued support.

  What you have here, so it seems that 01554156 is the comment_text, not the case_id. change what I wrote to

  and ociq.comment_text != :parn
  

• Use the table of numbers as "item select to compare.

  Greetings,

  I'm curious to know how to use an array of numbers as value in the tab select edit ideally my "case" would execute an expression "Contains(Locals.arrayofnumbers,0)."

  Basic principle:

  1 Labview VI launches with ListBox containing all tests (multiple selections enabled)

  OUTPUT is an array of I32.

  2 I32 table is attributed to Locals.arrayofnumbers

  3 Locals.arrayofnumbers is used with the element select 'compare '.

  4. each CASE has the statement... "next" Contains(Locals.arrayofnumbers,#)

  * each case would have 1 sequence to run *.

  Currently TS throws an error prompt indicating that the Select step expected number, that is the table of numbers.

  I already found a solution quick and pretty clean by instituiting just a condition prior to each sequence and captured to eliminate flow control all together. But I prefer not to use prerequisites for global flow control if possible and use controls to rate as expected.

  I have used TS help, but don't quite give me what I needed. Maybe I didn't use the correct search string. The forum here, is the same. I'm sure that the answer may be there, but maybe I'm using the wrong search string.

  Thanks in advance for any help.

  To SUM UP: User selects (via LabVIEW listbox) 1 - n tests to be run (output table I32). I32 table is used for the selection of the case by evaluating "contains (Local.arrayofnumbers, 0).

  Kind regards

  chazzzmd78

  Honestly, a Select System / box is the wrong choice for what you do.  I'd go with the prerequisite options.  It reduces the number of steps of TestStand.

  In your case you just to see whether something exists or not in a table.  Ideally, you will use the Select operations / box when you have 1 selected option of many.  I suppose you're a loop around the case select so that you can run all the tests so that your code looks something like this:

  For N (N is the number of tests they have selected)

  Select Locals.ArrayOfNumbers

  Briefcase (Locals.ArrayOfNumbers, 1).

  Run test 1

  Briefcase (Locals.ArrayOfNumbers, 2)

  Run the test 2

  Select close

  Closing loop

  If you want to use the Select option / box correctly I would like this:

  Item ForEach in Locals.ArrayOfNumbers (assign the item being Locals.i)

  Select Locals.i

  Case 1

  Run test 1

  Case 2

  Run the test 2

  Select close

  Close ForEach

  I hope that makes more sense.  If you have any questions let me know.

  Kind regards

• Why is the launch of Acrobat Pro XI on new computer Windows 8 does not?

  I installed the version of Acrobat Pro XI initially purchased in 2012 (and installed on a laptop XP) on my new computer Windows 8. Installation was successful; However, at the launch of the application to open an existing document or create a new document, a window opens asking for an update of the serial number and asking to choose from one of the products on the drop-down list, then by entering the serial number.  The message on top, says "Serial number not a product not qualifying."  Well, on the one hand, Acrobat Pro XI is not on the list, so I can't select it.  Only Acrobat Standard XI and others appear.

  So, what should I do to be able to open this software on my new computer?   Thanks for any clarification.   Tried the cat, but after 30 minutes of waiting, I gave up.

  The key may be the statement "eligible product. Apparently you have an upgrade version and the application is for the SN of the previous version of Acrobat. Must be at least 9 AA.

• Firefox is no longer in the first 5 seconds after the launch plan

  I am running Win7 with all the latest updates and Firefox 13.0.1. After I run Firefox, a few seconds later (it varies), the Firefox window is no longer in the foreground. It's as if I clicked on another window or wall-paper, and the Firefox window is no longer selected. It becomes embarrassing when I launch Firefox, click a bookmark to blog and try to scroll down with my mouse wheel. All of a sudden, it stops scrolling because the window is no longer in the first plan/selected, and I have to click on the Firefox window back to the foreground. Note that if I open other windows, the Firefox window always remains above these windows. But the window of Firefox itself is not the selected object.

  I finally found the plugin that asks that question for me. The plug-in, I confirmed my system is 'Shockwave Flash 11.3.300.268', which is the most recent available now. Deactivating a plugin solves the problem for me. I hope an update of Adobe will respond to that.

• Pinwheel 10-20 seconds on the launch of each application

  Since upgrading my Macbook Pro at El Capitan I had a problem where launch apps cause a 10-20 seconds of reel. Oddly, the application seems to start immediately (i.e. clicking on Safari immediately brings up the Safari window) but when demand becomes inadmissible and non-interactive with reel spinning for an average of 15 seconds.

  I ran repair disk such as suggested by some other items with no improvement. I used the console to collect newspapers while it happened between a launch system and Safari preferences and the only common element between the two seems to be the message, repeated three times.

  2016-03-07 12:00:04.102 PM apsd [81]: could not send activation record to com.apple.ManagedClient.enroll service

  2016-03-07 12:00:13.051 PM System Preferences [492]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:13.051 PM System Preferences [492]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:13.052 PM System Preferences [492]: failed to SecTaskLoadEntitlements error = 22

  from 12:00:04.102 to 12:00:13.052 (about 9 seconds) System Preferences was not on the screen and available. After the last SecTaskLoadEntitlements has no error to the 12:00:13.052 that the Preferences window

  Similarly at the launch of Safari

  2016-03-07 12:00:31.068 PM Safari [497]: KeychainGetICDPStatus: key :-25300

  2016-03-07 12:00:31.068 PM Safari [497]: KeychainGetICDPStatus: status: power off

  2016-03-07 12:00:31.095 PM Safari [497]: KeychainGetICDPStatus: key :-25300

  2016-03-07 12:00:31.095 PM Safari [497]: KeychainGetICDPStatus: status: power off

  2016-03-07 12:00:31.414 PM EET [275]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:34.082 PM configd [56]: inet_set_autoaddr (1, 1) failed, busy resource (16)

  2016-03-07 12:00:47.418 PM Safari [497]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:47.418 PM Safari [497]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:47.418 PM Safari [497]: failed to SecTaskLoadEntitlements error = 22

  The Safari window appeared almost immediately by clicking on the application icon. However, when the window pops up about 12:00:34 that the wheel seems to do the Safari window says plue, until that last SecTaskLoadEntitlements has no error is recorded in 12:00:47.418 (13 seconds)

  This happens on the launch of EACH application on the Macbook, iTunes, Safari, Mail, preferences system, AppStore... everything...

  Here's an example to launch app store where I paid VERY very attention to this journal entry begins and stop the roulette

  2016-03-07 12:13:37.069 PM App Store [524]: unknown class FRToolbar in the path /System/Library/PrivateFrameworks/StoreUI.framework/Resources/Base.lproj/FRStor eViewController.nib Interface Builder file.

  2016-03-07 12:13:37.880 PM EET [275]: failed to SecTaskLoadEntitlements error = 22

  PINWHEEL begins immediately after the connection of the above error *.

  2016-03-07 12:13:53.181 PM App Store [524]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:13:53.181 PM App Store [524]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:13:53.181 PM App Store [524]: failed to SecTaskLoadEntitlements error = 22

  REEL stops immediately after connecting the three errors above, that all appear at once in the console *.

  I have no idea what happened to SecTaskLoadEntitlements, but clearly it is originally a kind of performance problem because this is the message that surround each reel application console.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

  When the recovery menu appears, select disk utility, and then press the continue button. After loading disk utility select it

  indented Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• How to avoid the launch of Labview VI when he invokes in Teststand environment?

  Hi, friends.

  I am a student of teststand. I wrote a few screws by Labview. Now, I want to invoke in teststand environment.

  But when I run the sequence. LabVIEW automatically launches.

  How to avoid the launch of Labview when I run the sequence?

  Thank you.

  LabVIEW programs require a runtime engine. Under the TestStand configuration drop-down, select adapters. You can change the LabVIEW adapter to select the runtime rather than the development system.

  This should prevent the main screen of LabVIEW to appear, but you will not be able to change your LabVIEW VIs while they run of TestStand using the runtime engine.

• Half-life 2 says failed to load the Launcher DLL specified module could not be found

  Failed to load the Launcher DLL:

  the specified module could not be found

  Hi Madoo17,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error message?

  2. it worked before?

  3 did you changes to the computer before the show?

  Perform the steps:

  Method 1:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Step 1:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 2: Use the (SFC) System File Checker tool.

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information helps. Please reply back with the State so that we can help you.

• HP Officejet Pro 6830: Get the printer and the message "the printer into an error state" will not be printed

  Just received this printer refurbished HP 2 weeks ago to replace the one who had a problem with printhead.  Printing worked initially, but now I get the message "the printer into an error state" when I try to print.  The screen at the front of the printer automatically turns off as well, as he is extinguished.

  Hi @M45,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print because the printer is in an error state. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to do a hard reset to see if that will solve the problem.

  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  3. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).

  If there's an error message displayed in the menu on the front panel, before the display of the printer turns off?

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Click here to update the firmware of the printer with a USB connection.

  If you have completed all the above steps and your product still has a problem, service the product.

  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this helps. Please respond if you have any questions. I wish you a nice day!

• Join the results of a case statement

  Hello everyone;

  I can't with a query where I use a case statement to create a new column and attempt to reach an additional table on the resulting column.  I am fairly new to this and learn by trial and error, so if you think that it looks a little ugly or ineffective, I won't be offended.  It is used on my interface based on the web of companies, while I am not able to answer some basic questions such as the version of db.

  My need to use the case statement is the result of some strange methods and somewhat contradictory in order to link the product subcodes (sku, fcsku, fnsku), to a product code parent (ProdID).  In this case, the inventory is stored in the first table with one of the few types of premises SKUs, however the dimensional data only links to the ProdID.  I'm trying to instruction box allows to send the parent a second table (ProdID) code if the sku is there, or a third table if it is found on this table.  The main reason (in this case) I have to this ProdID is I can join the dimensional data of a fourth table.

  My current query:

  SELECT / * + USE_HASH (dbin, sku, xProdID, msr) * /.

  dbin.snapshot_date, dbin.bin_id, dbin. ISBN,

  CASE WHEN sku. ProdID IS NULL THEN xProdID.ITEM_AUTHORITY_ID

  Of ANOTHER sku. ProdID

  END ProdIDMaster,

  dbin. OWNER, dbin. QUANTITY, dbin. CONTAINER_ID,

  MSR. HEIGHT, msr. WIDTH, msr. LENGTH, msr. WEIGHT, msr. DIMENSIONAL_UOM, msr. WEIGHT_UOM,

  MSR. HEIGHT * msr. WIDTH * msr. LENGTH as a Volume

  OF D_BIN_ITEMS dbin

  SKU of LEFT JOIN O_FCSKUS ON dbin. ISBN = sku. FCSKU

  LEFT JOIN (SELECT * FROM D_FNSKU_ProdID_MAP)

  WHERE REGION_ID = 1

  AND SNAPSHOT_DAY = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')) xProdID

  ON dbin. ISBN = xProdID.FULFILLMENT_NETWORK_SKU

  LEFT JOIN (SELECT * FROM D_MP_ProdID_PKG_MEASUREMENTS)

  WHERE REGION_ID = 1 AND MARKETPLACE_ID = 1 AND PACKAGE_TYPE_ID = 1) msr

  ON ProdIDMaster = msr. ProdID

  WHERE dbin. WAREHOUSE_ID = "PHL5."

  AND dbin. Snapshot_date = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')

  AND dbin.bin_id like '% P-1-R '.

  ORDER BY dbin.bin_id;

  The error I receive:

  Statement 1 is invalid. ORA-00904: "ProdIDMaster": invalid identifier

  ProdIDMaster appears only in two places, an alias for the case statement, as well as a side of the join statement.  If I simply change the alias name, it has no effect, so I can only assume the question is how I refer to results of the case statement. I also tried to reach the word 'CASE', which returned "1 statement is not valid. "ORA-00904:"The MATTER": invalid identifier.

  Any help or advice would be greatly appreciated.

  Post edited by: 8ea4344e-80ea-44e7-b8ac-d482be7245a7 I made a mistake when I posted the code.  The ProdID_ID shown in the join should have been ProdIDMaster.  I need to change this due to the fact that the name of the column used (which is what I based my alias on) may have been considered confidential information. All the other columns names remained unchanged.

  Hello

  8ea4344e-80EA-44e7-B8AC-d482be7245a7 wrote:

  Hello everyone;

  I can't with a query where I use a case statement to create a new column and attempt to reach an additional table on the resulting column.  I am fairly new to this and learn by trial and error, so if you think that it looks a little ugly or ineffective, I won't be offended.  It is used on my interface based on the web of companies, while I am not able to answer some basic questions such as the version of db.

  My need to use the case statement is the result of some strange methods and somewhat contradictory in order to link the product subcodes (sku, fcsku, fnsku), to a product code parent (ProdID).  In this case, the inventory is stored in the first table with one of the few types of premises SKUs, however the dimensional data only links to the ProdID.  I'm trying to instruction box allows to send the parent a second table (ProdID) code if the sku is there, or a third table if it is found on this table.  The main reason (in this case) I have to this ProdID is I can join the dimensional data of a fourth table.

  My current query:

  SELECT / * + USE_HASH (dbin, sku, xProdID, msr) * /.

  dbin.snapshot_date, dbin.bin_id, dbin. ISBN,

  CASE WHEN sku. ProdID IS NULL THEN xProdID.ITEM_AUTHORITY_ID

  Of ANOTHER sku. ProdID

  END ProdIDMaster,

  dbin. OWNER, dbin. QUANTITY, dbin. CONTAINER_ID,

  MSR. HEIGHT, msr. WIDTH, msr. LENGTH, msr. WEIGHT, msr. DIMENSIONAL_UOM, msr. WEIGHT_UOM,

  MSR. HEIGHT * msr. WIDTH * msr. LENGTH as a Volume

  OF D_BIN_ITEMS dbin

  SKU of LEFT JOIN O_FCSKUS ON dbin. ISBN = sku. FCSKU

  LEFT JOIN (SELECT * FROM D_FNSKU_ProdID_MAP)

  WHERE REGION_ID = 1

  AND SNAPSHOT_DAY = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')) xProdID

  ON dbin. ISBN = xProdID.FULFILLMENT_NETWORK_SKU

  LEFT JOIN (SELECT * FROM D_MP_ProdID_PKG_MEASUREMENTS)

  WHERE REGION_ID = 1 AND MARKETPLACE_ID = 1 AND PACKAGE_TYPE_ID = 1) msr

  ON ProdIDid_ID = msr. ProdID

  WHERE dbin. WAREHOUSE_ID = "PHL5."

  AND dbin. Snapshot_date = TO_DATE('{RUN_DATE_YYYY/MM/DD}','YYYY/MM/DD')

  AND dbin.bin_id like '% P-1-R '.

  ORDER BY dbin.bin_id;

  The error I receive:

  Statement 1 is invalid. ORA-00904: "ProdIDMaster": invalid identifier

  ProdIDMaster appears only in two places, an alias for the case statement, as well as a side of the join statement.  If I simply change the alias name, it has no effect, so I can only assume the question is how I refer to results of the case statement. I also tried to reach the word 'CASE', which returned "1 statement is not valid. "ORA-00904:"The MATTER": invalid identifier.

  Any help or advice would be greatly appreciated.

  Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.

  Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).  Use "SELECT * VERSION of $ v;" to get it.

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

  When you define an alias for column (such as PriodIDMaster) in the SELECT a query clause, you can use the alias in the ORDER byclause in this request, but this is the only place in this same query, where you can use it.  If you want to use anywhere, like in a join condition, then calculate the new column in a subquery; then you can use it anywhere you want in a Super request.

  I see expression BOX (not the same as a declarationBOX) where when ProdIDMaster is defined, but I do not see where it is used.  Are you sure that you posted the code that is causing the problem?

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.