The maximum error ODI error threshold

Similar Questions

• "Filtering exceeds the maximum time" error in the crawl log

  A track log contained the following error. Is this error related to the Configuration of robot setting "Crawler Timeout (seconds) threshold? (Mine is set * 30 * seconds.)
  
  "Filtering exceeds the maximum time * 108 * seconds; killed process. dating status 1 without any error message.

  No, they are not related. Filtering is the process of conversion to the format (Word, PDF) documents into searchable text. If it exceeded the 108 seconds the process had almost certainly hanged, most likely indicating a corrupt file.

• NonLinearFitWithWeight do not erturn of error if exceeded the maximum number of iterations

  Hello

  It seems to me that the NonLinearFitWithWeight function does NOT return an error if the maximum number of iterations is reached without achieving a solution – unlike the description in the manual...

  Previously, I had reported a bug related to the NonLinearFitWithMaxIters function that has been fixed in CVI2009 (bug ID 183434). However, since this function nonlinearfitwithweight is new on CVI2009, there could well be a bug too...

  Wolfgang

  
  

• Deny access to my SkyDrive workbook error: "workbook is greater than the maximum size of workbook can be opened in the browser.

  Original title: deny access to my workbook to SkyDrive

  I have a workbook stored in SkyDrive that I share with several co-workers. We had no problem sharing the workbook for the last two weeks, but this morning, we are all getting an error message saying "Workbook is larger than the maximum size of workbook can be opened in the browser" and cannot access it at all. It's a very important workbook we need on a daily basis at work, then I would greatly appreciate any advice you could provide!

  Thank you
  Samantha

  Hello

  Because the problem is related to SkyDrive, I suggest you to report this problem in windows live support team.
  http://windowslivehelp.com/product.aspx?ProductID=6

• Error already have the maximum number of partitions, impossible to reclaim the unallocated disk space

  Original title: recovery disk unallocated space - please help

  I bought a lenovo z370 and it came with a partition of a disk c with 653 GB NTFS and d lenovo 30 GB drive and two other drives without names like d or e simply unamed with 200 MB of space and another with 14 GB of space... now to partition C drive more far I used the shrink option and shrunk 200 GB which now shows as unallocated space and when I try to create a new volume on it it says I already have the maximum number of partitions... What do I do now? How to restore this 200 GB of unallocated in my c drive space or do in another player... Please please help

  And see if I've followed the process this last link of how to re-partition my drive is what I did in the first place and because I got 4 partitions as I detailed it in the other answer, I have written that if I reduce my c drive, it becomes unallocated space, and even with the new volume Wizard does not become a player since I get an error message have already 4 partitions...

• Field in the data file exceeds the maximum length - CTL file error

  Hello

  I load data into the new system using the CTL file. But I get the error message 'field in the data file exceeds the maximum length "for few records, other records are processed successfully." " I checked the length of the error record in the extracted file, it is less than the length of the target table, VARCHAR2 (2000 bytes). Here is an example of error data,

  
  

  Hi Rebecca ~ I just talk to our Finance Department and they agreed that ABC payments can be allocated to the outstanding invoices, you can send all future invoices directly to me so that I could get paid on time. ~ hope it's okay ~ thank you ~ Terry ~.

  This error is caused because of the special characters in the string?

  Here is the ctl file that I use,

  OPTIONS (SKIP = 2)

  DOWNLOAD THE DATA

  CHARACTERSET WE8ISO8859P1

  INFILE '$FILE '.

  ADD

  IN THE TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC".

  WHEN (1)! = 'FOOTER ='

  FIELDS TERMINATED BY ' |'

  SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS)

  < nom_de_colonne >,

  < nom_de_colonne >,

  COMMENTS,

  < nom_de_colonne >,

  < nom_de_colonne >

  )

  Thanks in advance,

  Aditya

  Hello

  I suspect it's because of the construction in default length of character in sqldr data types - char (255) must take no notice of what the definition of the current table is by default.

  Try adding CHAR (2000), to your controlfile so you end up with something like this:

  OPTIONS (SKIP = 2)

  DOWNLOAD THE DATA

  CHARACTERSET WE8ISO8859P1

  INFILE '$FILE '.

  ADD

  IN THE TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC".

  WHEN (1)! = 'FOOTER ='

  FIELDS TERMINATED BY ' |'

  SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS)

  ,

  ,

  COMMENTS TANK (2000).

  ,

  )

  See you soon,.

  Harry

• When loading, error: field in the data file exceeds the maximum length

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Solaris: 11.2.0.3.0 - Production Version

  NLSRTL Version 11.2.0.3.0 - Production

  I am trying to load a table, small size (110 lines, 6 columns).  One of the columns, called NOTES is less error when I run the load.  That is to say that the size of the column exceeds the limit max.  As you can see here, the column of the table is equal to 4000 bytes)

  CREATE TABLE NRIS. NRN_REPORT_NOTES

  (

  Sys_guid() NOTES_CN VARCHAR2 (40 BYTE) DEFAULT is NOT NULL.

  REPORT_GROUP VARCHAR2 (100 BYTE) NOT NULL,

  POSTCODE VARCHAR2 (50 BYTE) NOT NULL,

  ROUND NUMBER (3) NOT NULL,

  VARCHAR2 (4000 BYTE) NOTES,

  LAST_UPDATE TIMESTAMP (6) WITH ZONE SCHEDULE systimestamp NOT NULL default

  )

  TABLESPACE USERS

  RESULT_CACHE (DEFAULT MODE)

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  80K INITIAL

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  DEFAULT FLASH_CACHE

  DEFAULT CELL_FLASH_CACHE

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  I did a little investigating, and it does not match.

  When I run

  Select max (lengthb (notes)) in NRIS. NRN_REPORT_NOTES

  I got a return of

  643

  .

  Which tells me that the larger size of this column is only 643 bytes.  But EACH insert is a failure.

  Here is the header of the file loader and first couple of inserts:

  DOWNLOAD THE DATA

  INFILE *.

  BADFILE '. / NRIS. NRN_REPORT_NOTES. BAD'

  DISCARDFILE '. / NRIS. NRN_REPORT_NOTES. DSC"

  ADD IN THE NRIS TABLE. NRN_REPORT_NOTES

  Fields ended by '; '. Eventually framed by ' |'

  (

  NOTES_CN,

  REPORT_GROUP,

  Zip code

  ALL ABOUT NULLIF (R = 'NULL'),

  NOTES,

  LAST_UPDATE TIMESTAMP WITH TIME ZONE ' MM/DD/YYYY HH24:MI:SS. FF9 TZR' NULLIF (LAST_UPDATE = 'NULL')

  )

  BEGINDATA

  | E2ACF256F01F46A7E0440003BA0F14C2; | | DEMOGRAPHIC DATA |; A01003; | 3 ; | demographic results show that 46% of visits are made by women.  Among racial and ethnic minorities, the most often encountered are native American (4%) and Hispanic / Latino (2%).  The breakdown by age shows that the Bitterroot has a relatively low of children under 16 (14%) proportion in the population of visit.  People over 60 represent about 22% of visits.   Most of the visitation comes from the region.  More than 85% of the visits come from people who live within 50 miles. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  | E2ACF256F02046A7E0440003BA0F14C2; | | DESCRIPTION OF THE VISIT; | | A01003; | 3 ; | most visits to the Bitterroot are relatively short.  More than half of the visits last less than 3 hours.  The median duration of visiting sites for the night is about 43 hours, or about 2 days.  The average Wilderness visit lasts only about 6 hours, although more than half of these visits are shorter than the duration of 3 hours.   Most of the visits come from people who are frequent visitors.  Over thirty percent are made by people who visit between 40 and 100 times a year.  Another 8% of visits from people who say they visit more than 100 times a year. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  | E2ACF256F02146A7E0440003BA0F14C2; | | ACTIVITIES |. A01003; | 3 ; | most often reported the main activity is hiking (42%), followed by alpine skiing (12%) and hunting (8%).  More than half of the report visits participating in the relaxation and the display landscape. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  Here's the full start of log loader, ending after the return of the first row.  (They ALL say the same error)

  SQL * Loader: Release 10.2.0.4.0 - Production Thu Aug 22 12:09:07 2013

  Copyright (c) 1982, 2007, Oracle.  All rights reserved.

  Control file: NRIS. NRN_REPORT_NOTES. CTL

  Data file: NRIS. NRN_REPORT_NOTES. CTL

  Bad File:. / NRIS. NRN_REPORT_NOTES. BAD

  Discard File:. / NRIS. NRN_REPORT_NOTES. DSC

  (Allow all releases)

  Number of loading: ALL

  Number of jump: 0

  Authorized errors: 50

  Link table: 64 lines, maximum of 256000 bytes

  Continuation of the debate: none is specified

  Path used: classics

  NRIS table. NRN_REPORT_NOTES, loaded from every logical record.

  Insert the option in effect for this table: APPEND

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  FIRST NOTES_CN *;  O (|) CHARACTER

  REPORT_GROUP NEXT *;  O (|) CHARACTER

  AREA CODE FOLLOWING *;  O (|) CHARACTER

  ROUND                                NEXT     *   ;  O (|) CHARACTER

  NULL if r = 0X4e554c4c ('NULL' character)

  NOTES                                NEXT     *   ;  O (|) CHARACTER

  LAST_UPDATE NEXT *;  O (|) DATETIME MM/DD/YYYY HH24:MI:SS. FF9 TZR

  NULL if LAST_UPDATE = 0X4e554c4c ('NULL' character)

  Sheet 1: Rejected - error in NRIS table. NRN_REPORT_NOTES, information ABOUT the column.

  Field in the data file exceeds the maximum length.

  I don't see why this should be failed.

  Hello

  the problem is bounded by default, char (255) data... Very useful, I know...

  you need two, IE sqlldr Hat data is longer than this.

  so change notes to notes char (4000) you control file and it should work.

  see you soon,

  Harry

• Error deploying VM - exceeds the maximum value to control

  Dear all,

  I am trying to deploy a virtual to a model windows 2008 x 64 computer in a cluster, but I got an error error exceeds the maximum for given control.

  I need to know is there any number of virtual machines that can be deployed from a model, is - that related to the Windows license?

  Thank you

  Regads,

  N M

  1 try to deploy the virtual computer with the mounting hardware for deployment.

  See the KB below:

  http://KB.VMware.com/kb/1016221

  Or try the below

  Workaround solution:

  1. Convert virtual machine model;
  2. Change the settings for virtual machine; (if you get an error here, you unsubscribe vm and save it (i.e) remove from inventory and add to the inventory).
  3. Choose a network suitable for model; remove the network card or see if you added vmxnet.
  4. Convert the virtual machine to the model;
  5. Try to deploy new virtual machine model to see if it works properly again;

  Allocation of points for the useful and correct answer by clicking on the sub tab

• OBIEE 11 g: error - exceeded configured the maximum number of authorized release

  Hi guys,.
  
  We are implementing the OOTB repository, after some reports of loading data show the following error msg. Can someone tell me where to change the limits?
  
  «Error loading of list "«display error»»»
  «"Exceeded the configured maximum number of allowed output prompts, sections, the lines or columns»» It must be because of the restriction on the number of records in a report"
  
  Thanks in advance

  Hello user,.

  Even I faced the same error and solved in the way below: -.

  Error: Exceeded the configured maximum number of guests allowed output, the sections, the lines of OBIEE 11 g.

  So to solve this problem, add the below tags mentioned in the instanceconfig.xml file that is located under

  \Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1

  http://bidevata.WordPress.com/2012/04/27/exceeded-configured-maximum-number-of-allowed-output-prompts-in-OBIEE-11g/

  Mark useful/correct.

  Thank you
  OBIEELearner.

• Snapshot error (.. is larger than the maximum size supported by the data store)

  Hello

  I have a standalone DL360G5 with local storage. I have about 1.1 TB of storage (free in storage 1 TB)

  I have a virtual machine that is configured with a provisioning (256 GB of storage) which is currently 14 GB. He should get a site off backup server.

  When you take a snapshot of the next error message.

  'File '.

  The error message doesn't make sense because it takes only 14 GB of storage, and since I'm more Quen free 1 TB of storage should not be any problem.

  Someone knows how to solve this problem or to get a work around for a snapshot?

  Thank you

  I think that you will need to reformat the data with a block size store. By default, the maximum is 256GB. Slim doesn't help here as a snapshot could grow beyond.

• Change the maximum size of the JVM heap to 1024 gives error

  Change the maximum size of the JVM heap to 1024 gives an error.

  Environment:

  CF9
  Windows 2003 R2 Sp2 operating systems
  XEON PROCESSOR
  RAM 2 GB

  After the installation of ColdFusion, one of the parameters that gets changed is:
  Server settings > Java and JVM > (MB) 1024 maximum JVM heap size
  ColdFusion Application service does not start with this setting. A file of errors is created in \ColdFusion9\runtime\bin\hs_err_pid1234.log (where 1234 number changes). The details of the log file are long so soon stick a sample.

  
  Arguments for the JAVA virtual machine are:
  Java.args =-Server-Xmx1024m - Dsun.io.useCanonCaches = false - XX: MaxPermSize = 192 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  The JVM max 1024 m is one of the commonly recommended changes. Why change the maximum FMV of 512 m prevents ColdFusion from running?

  It is indeed a strange problem. Something does not seem right/normal.

  I did some digging and found a blog entry potentially useful:

  http://iamgoat.com/post/804922016/ColdFusion-application-server-wont-start-after-Windows

  It looks just like your problem, but it is true, it offers a quite specific problem/solution, that may not apply.

  Here's another question: are you looking in the \runtime\logs directory? The log files it may show more information on the problem, maybe before or after the time that develop these logs of PID? They may be secondary to another primary problem. Search specifically for the OutOfMemory string in the log files.

  If that can't find anything, I would suggest another thought: consider changing the JAVA virtual machine. I see you are using 1.6_0_14. There are several points between it and the last _21 you can try.

  Finally, a thought more to consider: since this is the Hotspot compiler which reports the error (SH in hs_err_pidnnnn.log), it is possible that the addition of a switch to turn off Hotspot, just to go beyond that, could give a different error message with perhaps more information. In the following (or the CF admin, if we in Standard mode or server), try to add - Xint.

  Let us know if any help.

  /Charlie

  Providing CF troubleshooting services at carehart.org/consulting

  [email protected]

• trying to erase the ECC errors

  I have a server whose health LED is orange, and UCSM shows a F1237:
  Description: Health LED to the 7/1 displays error server. Reason: DDR4_P1_A1_ECC:Sensor threshold crossed. DDR4_P1_A2_ECC:sensor threshold crossed

  Last Transition for this anomaly is 2015-04-01

  There are apparently a few errors ECC for the POST in April, but in addition, there was only 1 ECC of error can be corrected in April and 1 ECC of error can be corrected in June (zero errors incorrigible never on this server).

  I: Yes

  1 together UCSM and chassis (7) newspapers UCS.

  2. takes note of the F1237,

  3 reset the counters for memory on A1 P1 and P1 A2 DIMM error from the correct window (--> equipment--> inventory--> memory--> DIMM A1 double click to open a small window click 'Restore errors of memory' click 'Yes' and then did the same thing for the DIMM A2 )

  4 deleted the newspaper of SALT on this blade

  5 reset the MMIC for this blade.

  After the reset MMIC, the rest light orange and the F1237 is always on the list of mistakes all the way up to the main frame on the material tab node.

  What seems really weird, is that the SALT of this blade says now the 4 entries below (the same entries he showed back in April so I erased the SALT and reset the MMIC), but these 4 entries have now date from the day on them, even if the last Transition for the F1237 show always also 2015-04-01 , and this blade has not restarted today. In addition, this blade has restarted last weekend and who appears in the SALT, but there is no ECC errors during POST that day here.

  Memory DDR4_P1_A1_ECC # 0 x 81 | DURING POST: Critical Upper - go high. Said. Reading 60250 > = error threshold 16000
  Memory DDR4_P1_A1_ECC # 0 x 81 | DURING POST: Non-recoverable Upper - go high. Said. Reading 60250 > = error threshold 60250
  Memory DDR4_P1_A2_ECC # 0 x 82 | DURING POST: Critical Upper - go high. Said. Reading 60250 > = error threshold 16000
  Memory DDR4_P1_A2_ECC # 0 x 82 | DURING POST: Non-recoverable Upper - go high. Said. Reading 60250 > = error threshold 60250

  How SALT is showing error MESSAGE with today's date, when the server has not yet been restarted today (and the last transition for the F1237 always shows a date of April)?

  Hey,.

  you even opened a case of TAC?

  County ECC seems to be high.

• Unable to Boot PeopleSoft area (PIA)-&gt; CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  As I start my custom domain name (HC92), I get the following:
  

  exec PSWATCHSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSWATCHSRV: process id = 1636... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2656... Has begun.

  exec PSAPPSRV '.\LOGS\stdout' EI '.\LOGS\stderr'[email protected] s PSAPPSRV d o: process id = 2644... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2832... Has begun.

  exec PSSAMSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSSAMSRV TESTSERV: process id = 2692... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2448... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 496... Has begun.

  exec PSANALYTICSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSANALYTICSRV TESTSERV: process id = 2964... Has begun.

  exec PSRENSRV o '.\LOGS\stdout"e".\LOGS\stderr"- A – d s PSRENSRV TESTSERV: process id 2356 =... Has begun.

  exec PSMONITORSRV EI o '.\LOGS\stdout' '.\LOGS\stderr' - A - ID - 54217 d TESTSERV s PSMONITORSRV: process id = 1056... Has begun.

  exec JSL o '.\LOGS\stdout"e".\LOGS\stderr"- A – n //PSOFT_PC:9000 m 5 - M7-I have 5-j ANY - x 40 s 10 - c 1000000 w JSH: failed.

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  tmshutdown - qy

  ==============ERROR!================

  Try to start met domain errors! See TUXEDO log for more details.

  ==============ERROR!================

  ----------------------------

  Domain LOG FILE

  ----------------------------

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 06:34.774] (0) attempt to Begin priming on domain HC92

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/2

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.056] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:46.134] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_2\

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:47.056] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2656 (0) [2015-01 - 13 T 17: 06:51.196] (0) server started

  
  

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/1

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.603] (3) detected time zone is Pacific SA Daylight saving time

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.665] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSAPPSRV_1\

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:51.837] (2) App Server host lag is DB + 0 0:00:00 (ORACLE PSHRDMO)

  PSAPPSRV.2644 (0) [2015-01 - 13 T 17: 06:52.415] (0) server started

  
  

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/101

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.728] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:52.790] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_101\

  PSSAMSRV.2832 (0) [2015-01 - 13 T 17: 06:53.087] (0) server started

  
  

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (0) PeopleTools version 8.54 (Windows) from. Tuxedo server is APPSRV 99/100

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.415] (3) detected time zone is Pacific SA Daylight saving time

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.493] (0) used Cache Directory: C:\PS _CFG_HOME\appserv\HC92\CACHE\PSSAMSRV_100\

  PSSAMSRV.2692 (0) [2015-01 - 13 T 17: 06:53.806] (0) server started

  
  

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.743] (0) st PeopleTools version 8.54 (Windows) arting . Tuxedo server is RENGRP 92/101

  PSRENSRV.2356 [2015-01 - 13 T 17: 06:56.759] (3) switch to the new log file * C:\PS_CFG_H OME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *

  
  

  PSADMIN.1088 (0) [2015-01 - 13 T 17: 07:13.698] (0) attempt to end HC92 field boot

  * C:\PS_CFG_HOME\appserv\HC92\LOGS\PSRENSRV_0113.LOG *.

  -Begin PSRENSRV boot-

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.273] (3) (NET.113): RenRequest customer service request succeeded

  PSRENSRV.2356 (0) [2015-01 - 13 T 17: 06:57.843] (3) (NET.113): RenRequest customer service request succeeded

  2356.2708 [2015-01 - 13 T 17: 07:02.075] (WARN) nsmain: off the server immediately asked

  ----------------------------

  SMOKING LOG FILE

  ----------------------------

  170634.PSOFT_PC! PSADMIN.1088: Start the start on domain HC92 attempt

  170639.PSOFT_PC! tmadmin.556.2400.-2: TMADMIN_CAT:1330: INFO: command: start - a

  170641.PSOFT_PC! tmboot.2392.2544.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170641.PSOFT_PC! tmboot.2392.2544.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170643.PSOFT_PC! BBL.2340.1680.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit, Patch level (none)

  170643.PSOFT_PC! BBL.2340.1680.0: LIBTUX_CAT:262: INFO: Standard master boot

  
  

  170645.PSOFT_PC! tmboot.1488.2464.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS201 0, 64-bit

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is to t to 120 seconds

  170645.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected

  
  

  170645.PSOFT_PC! PSWATCHSRV.1636.2816.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSWATCHSRV.1636.2816-2: LIBTUX_CAT:262: INFO: Standard main starting

  
  

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170645.PSOFT_PC! PSAPPSRV.2656.592.0: LIBTUX_CAT:262: INFO: Standard main starting

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170651.PSOFT_PC! PSAPPSRV.2644.2804.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170652.PSOFT_PC! PSSAMSRV.2832.2208.0: LIBTUX_CAT:262: INFO: main starti Standardng

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSSAMSRV.2692.2668.0: LIBTUX_CAT:262: INFO: main starti Standardng

  
  

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170653.PSOFT_PC! PSANALYTICSRV.2448.2180.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170654.PSOFT_PC! PSANALYTICSRV.496.2476.0: LIBTUX_CAT:262: INFO: Standard main stsurglace

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170655.PSOFT_PC! PSANALYTICSRV.2964.1536.0: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170656.PSOFT_PC! PSRENSRV.2356.2708.-2: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64-bit

  170656.PSOFT_PC! PSRENSRV.2356.2708-2: LIBTUX_CAT:262: INFO: key start Standarding

  
  

  170658.PSOFT_PC! PSMONITORSRV.1056.2212.-2: 13/01/2015: Tuxedo Version 12.1.3.0.0_VS2010, 64-bit

  170658.PSOFT_PC! PSMONITORSRV.1056.2212-2: LIBTUX_CAT:262: INFO: main s Standardtarting

  
  

  170658.PSOFT_PC! JSL.640.904.0: 13/01/2015: Version Tuxedo 12.1.3.0.0_VS2010, 64 -bit

  170658.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:262: INFO: Standard master boot

  170658.PSOFT_PC! JSL.640.904.0: INFO: version JOLT Jolt 12.1.1.0 Oracle Listener

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1568: "INFO: threshold of Compression is tot-1000000 '

  170659.PSOFT_PC! JSL.640.904.0: JOLT_CAT:1242: ' ERROR: Bad Internet type listning address provided: //PSOFT_PC:9000 '

  170659.PSOFT_PC! JSL.640.904.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  
  

  170659.PSOFT_PC! tmboot.1488.2464.-2: CMDTUX_CAT:825: ERROR: process to PSOFT JSL _Pc failed with / t tperrno (TPESYSTEM - internal system error)

  170659.PSOFT_PC! tmboot.1488.2464.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error met, launch the user error handler

  
  

  170710.PSOFT_PC! BBL.2340.1680.0: CMDTUX_CAT:26: INFO: The BBL out of system

  
  

  170713.PSOFT_PC! PSADMIN.1088End attempt to boot on domain HC92

  -------------------------------------------------------------

  SETTINGS FOR THE DOMAIN

  ------------------------------------------------------------

  ----------------------------------------------

  Menu quick access - configure area: HC92

  ----------------------------------------------

  Characteristic parameters

  ==========                                 ==========

  (1) pub/Sub servers: No. 17) DBNAME: [PSHRDMO]

  (Server 2) Quick: No. 18) DBTYPE: [ORACLE]

  (Query servers 3): No. 19) user name: [PS]

  ((4) shock: Yes 20) UserPswd: [PS]

  ((5) Jolt relay: No. 21) Networkid: [TESTSERV]

  ((6) WSL: No. 22) AddToPATH: [C:\app\psoft\product\11.2.0\dbhome_1\BIN]

  (PC 7 debugger): No. 23) ConnectID: [people]

  (Event notification 8): Yes 24) ConnectPswd: [people]

  [(Serveurs de 9) MCF: No. 25) DomainConnectPswd:]

  (10 assembler) Perf: No. 26) Port of WSL: [7000]

  ((11) Analytics servers: Yes 27) JSL Port: [9000]

  (Bridge 12) areas: No. 28) Port of JRAD: [9100]

  (13) the server events: No.

  Actions

  =========

  (14) load config as shown

  (15) custom configuration

  (16) the settings of the environment

  (h) aid for this menu

  (q) to return to the previous menu

  TIP: Enter 17 to change DBNAME, then 14 to load

  Enter the selection (1-28, h or q):

  --------------------------------------------------------------

  ENVIRONMENT SETTINGS

  --------------------------------------------------------------

  C:\Users\psoft > set

  ALLUSERSPROFILE = C:\programdata

  APPDATA = C:\Users\psoft\AppData\Roaming

  CommonProgramFiles = c: files

  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files

  CommonProgramW6432 = c: files

  COMPUTERNAME = PSOFT_PC

  ComSpec=C:\Windows\system32\cmd.exe

  FP_NO_HOST_CHECK = NO

  HOMEDRIVE = C:

  HOMEPATH = \Users\psoft

  JAVA_HOME = C:\Program Files\Java\jdk1.8.0_25

  JAVA_OPTS = "" - Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID = 1.0 - Xms32 m - Xmx64m " "

  LOCALAPPDATA = C:\Users\psoft\AppData\Local

  LOGONSERVER = \\PSOFT_PC

  NUMBER_OF_PROCESSORS = 2

  OS = Windows_NT

  Path = C:\Program Files\Java\jdk1.8.0_25\bin

  ; C:\app\psoft\product\11.2.0\dbhome_1\bin

  ; C:\app\psoft\product\11.2.0\dbhome_2\bin

  ; C:\Windows\System32; C:\Windows

  ; C:\windows\System32\Wbem

  ; C:\Windows\system32\WindowsPowerShell\v1.0\

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\bin

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin\server

  ; C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010\jre\bin

  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC

  PROCESSOR_ARCHITECTURE = AMD64

  PROCESSOR_IDENTIFIER = Intel64 family 6 model 58 Stepping 9 GenuineIntel

  PROCESSOR_LEVEL = 6

  PROCESSOR_REVISION = 3 a 09

  ProgramData = ProgramData

  ProgramFiles = c: Program Files

  ProgramFiles (x 86) = c: Program Files (x 86)

  ProgramW6432 = C:\Program Files

  PROMPT = $P$ G

  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  PS_APP_HOME = C:\HC9.2

  PS_CFG_HOME = C:\PS_CFG_HOME

  PS_HOME = C:\PT8.54

  PUBLIC = C:\Users\Public

  SESSION = Console

  SystemDrive = C:

  SystemRoot = C:\Windows

  TEMP = C:\Users\psoft\AppData\Local\Temp

  TMP = C:\Users\psoft\AppData\Local\Temp

  TUXDIR=C:\app\tuxedo\tuxedo12.1.3.0.0_VS2010

  USERDOMAIN = PSOFT_PC

  USERNAME = psoft

  USERPROFILE = C:\Users\psoft

  windir = C:\Windows

  windows_tracing_flags = 3

  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  _JAVA_OPTIONS =-Xmx512M

  Found this post:

  ISNAT_CAT:1242: ERROR: Bad Internet type of listening address

  "The problem has been resolved after that I changed my name from ZEMEROV_A to ZEMEROV computer.

  Hyphens are not allowed for regular internet names. The only Microsoft DNS server

  allows hyphens. Obviously TUXEDO checks the internal Web address syntax.

  But I don't know why my IP (10.57.70.246) has failed.

  In any case, the issue is resolved. Make sure that TUXEDO documentation recommends-

  When using the name of the server host you talk server. This is case and sensitive syntax. »

  Where as: I changed my host name of psoft_pc to psoftpc and I changed the same on TNSNAMES and everything worked without problems.

  I'll mark this issue is resolved.

  Thank you.

• The interface when the insertion error

  Hello world

  I have the script with several variables because I need to run several queries.

  I have a table with a primary key + a column for each variable within the scenario of ODI.

  The ODI process must be run once a month and create one record in this table each time.

  So, I've created an interface in the ODI scenario. I filled these variables destination data store. I have no other stores data as a source.

  I use IKM SQL command append.

  During the execution of this interface, I get the following error:

  In step Insert flow in I$ table I get: java.sql.SQLSyntaxErrorException: ORA-00928: lack of SELECT keyword

  The code in this step is:

  insert into

  NLANGAI.II_ORG_DATOS_ACTIVIDAD

  (

  )

  Select
  Of
  where
  	(1 = 1)

  I don't know how to solve this problem, or if it's the best way to do what I want.

  Thanks in advance

  Hello 956682,

  Your explanation is a bit confusing, I think you mixed "ODI scénario" with another ODI concept, maybe package or even project (although data warehouses are not stored at the project level). Could you use specific terms of ODI?

  I also suspect that you are working with ODI 11 g here.

  Why not use just an ODI procedure to load your table target that you don't have a real data source? I think that it is not a good idea to use an interface here because you would have to use a workaround to make it work.

  Kind regards

  JeromeFr

• Behance plugin fails to publish on WIP.  Returns the following error: "cannot download an update WIP on Behance: invalid permissions or request type.

  Behance plugin fails to publish on WIP in Lightroom 5.6.  Returns the following error: "cannot download an update WIP on Behance: invalid permissions or request type.  (I've also seen this question asked in the forums of Deutsche in January 2014 without answers)

  In settings of Behance Adobe Photoshop Lightroom is authorized to:

  • Revoke access
  • can act on your behalf to comment, follow users, discover and appreciate the projects
  • Allows access to read the flow of network activity
  • Able to read collections you have marked as private
  • Possibility to create, manipulate and remove your collections.
  • Able to read current work marked as private
  • Able to view, manipulate, and delete a work in progress on your behalf

  Does anyone have a solution?

  -System settings-

  Lightroom version: 5.6 [974614]

  Operating system: Windows 8.1 Business Edition

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.0 GHz

  Built-in memory: 16301,9 MB

  Real memory for Lightroom: 16301,9 MB

  Real memory used by Lightroom: 374.4 MB (2.2%)

  Virtual memory used by Lightroom: 346,3 MB

  Size of the memory cache: 224,4 MB

  Maximum thread count used by Camera Raw: 4

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 2560 x 1440

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Costco Photo Center

  (4) Facebook

  (5) Flickr

  (6) home Plugin Leica

  (7) attachment Plugin Nikon

  Config.LUA flags: None

  Map #1: Vendor: 8086

  Feature: 412

  Subsystem: 5b 01028

  Review: 6

  Video memory: 0

  Map #2: Seller: 10de

  Feature: 4

  Subsystem: 5b 01028

  Revision: a1

  Video memory: 7 c 1

  Map #3: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  CardID: 1042

  Direct2DEnabled: false

  GPUDevice: D3D

  MaxTexture2DSize: 8192

  OGLEnabled: true

  Renderer: Intel(r) HD Graphics 4600

  ShaderModel: 11.1

  Vendor: Intel

  VendorID: 32902

  Version: 8086:0412:5 b 01028:0006

  Behance Plugin for LR LR 5.6 authorized not