The message store management
Hello
I have a Z3 Xperia and because a staged, I needed to recover was a very old message, sync all my messages on my phone. I normally have set to keep only last month. Expensive, so my internal storage is now hovering around the use of 70% and from time to time I receive notifications ' storage over 75%, move things. "
I looked but can not find (obvious) place where I can, ideally, specify the location of the message store. Be able to store on my SD card would be great and would serve as a convenient to start backup. If not, is there ay way to say to the Email app to just clear the local cache and return to my configuration setting: "last month". Clear data of application maybe would do that? I suspect that I would lose all the setings account too if I did. Maybe I should delete the account and recreate it. Yet once, not something I want.
Suggestions appreciated,
Andries
As Phy says, I'm afraid you can't change where the native email stores its data. But if you clear data for the application, all downloaded emails will be deleted and the account (as long as it is not an ActiveSync account).
But have you tried to simply decrease the amount of sync emails in the email app?
Tags: Sony Software
Similar Questions
-
Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.
original title: compaction of the database messages
Hi Kathy,
Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.
Mike
-
Help! I'm not a computer guru.
Today I noticed a new icon in my system tray and when I place my curson on it, I get the message: 'Windows manages the wireless adapter. Click here to use ProSet/Wireless. "(I have not clicked on the icon so I don't know what would happen if I did.) I recently downloaded Explorer 8 from the Microsoft site, but except that I have not changed anything with my computer. I have the NetGear wireless software on my computer, so I was surprised to see ProSet/Wireless. Also, the ProSet/Wireless will now appear in "programs". Is it possible that someone is hacking my computer wireless and succeeded in putting the ProSet software? On this subject, or is it something that is connected with Internet Explorer 8? Either way, I'm running Windows XP and have Norton 360 protection.
Thanks in advance for your comments.
What computer brand and model do you have?
What model Netgear wireless network card?
It is highly unlikely that anyone who has maliciously installed Intel Pro/Set on your computer (especially considering that he is even not manages your network card). Also, it is not related to IE 8. If I had to guess, I assume you have Windows Update configured to install updates "optional equipment" as well as "Critical" updates. If you do, change this setting.
Open the Device Manager (start > run > devmgmt.msc > OK), expand the "Network adapters" section by clicking on the +. What devices are listed under network adapters?
-
stop allows you to compact the message store
Whenever I use Windows Mail I get an offer to compact the message store. How can I stop this?
John Presland
I don't know why you don't want. Compact the database, and does not touch your messages. But... Tools | Options | Advanced | Hold button. Uncheck the box: "compact the database...". ».If you compact ever, sooner or later you will have problems. When you post this problem, you will get a response like that.Try to compact and repair the database with this tool. -
How to get rid of the message of Windows Mail wishing to compact the message store.
Original title: messsage compact store
How can I get rid of the box that appears whenever I go out from windows mail wishing to compact the message store?
You must let compact and then it ask again another 100 closures of Windows Mail. If you don't let not compact, the result will be that the database grows big and bigger and bigger and finally is corrupt and Windows Mail no longer works. In addition it will slow down Windows Mail because it becomes larger and slow down your system. So when he asks to be compacted let compact. It only takes a moment.
Steve
-
When I shut down windows I get a message about "compact the message store.
Whenever I close my email (windows mail), I gives me this message:
"Windows Mail can compact the message store. This can take up to a few minutes. »
I gives me two options: 'OK' or 'Cancel '.
I don't know what that means... and it becomes an annoyance. I have a lot of messages in my mail (which I think is the reason for the message), but I moved most of them into folders. What exactly is "compact the message store" and what it will do to my ability to access messages.
Thank you
The database must be corrected at any time and remove the wasted space. So, after each 100 closures that you get invited to compact the database, which performs this function. Because messages are stored separately from the database, it has no effect on the messages themselves. But you need allow the database to be compacted, so that it corrects the offsets and other errors. Otherwise WinMail may not work properly, so let this compact when it prompts you. You can also manually compact with my Windows Mail Utility (www.oehelp.com/WMUtil/) to solve the problems of database, but that will not change the behavior of WinMail invites you after each 100 closures.
You should always back up your messages frequently, as your hard disk may fail, and you will lose all of them. See www.oehelp.com/backup.aspx#wm
Steve
-
I recently started getting the following message when I start Windows Mail:
The message store has been damaged by an external application to Windows Mail. Windows Mail has been able to successfully recover from this corruption. (0 x 000000000) there are also twop messages in my Inbox "not found" and I can't delete them.
However no identoify not the application Windows and McAfee does not detect any virus.
Try to compact and repair the database.
-
I'M pass my mailbox mailbox busy and get their percentage, but I always get this message box "Compact the Massage store"... but nothing to tell me HOW it will be repeated. A bit like sign with a doc to read I think...?
What does Windows DO when he "compact the message store? Do I lose all the messages? Is he blind?
A value of any help, thanks EvieJD
Hello
The messages are really a database and compaction it just removes the white space
assigned to messages that have been previously deleted. The process does not remove all
other messages. Compaction of the database allows safer and less likely
to suffer from corruption.Some information here:
Message when you wake a computer Windows Vista from sleep or when you
Restart the computer: "Windows Mail can compact the message store.
http://support.Microsoft.com/kb/936092I hope this helps.
-
Windows Mail & Windows Live Mail does not start, could not open the message store
Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.
Hello
1. did you of recent changes to the system before the show?
I suggest you to follow the methods mentioned below and check if it helps.
Method 1: Troubleshoot Windows Mail
Follow the link below and troubleshoot Windows Mail and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
Method 2:
(a) open the windows Explorer.
(b) make a right click on the user C: folder, click Properties.
(c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.
(d) apply to all subfolders.
(e) let run its course.
Method 3:
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
(a) go to Start, type regedit in the search box.
(b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.
(c) right-click and choose export to back it up.
(d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.
(e) then try to start Windows mail.
Also, I suggest you to send your application in the Windows Live Solution Center for better support.
http://windowslivehelp.com/solutions.aspx?ProductID=15It will be useful.
-
Synchronization in the messaging queue manager
Hi all
I have a program of Messaging Manager similar to the model for measuring continuously and logging (CML) queued. Events on the front panel creating a message from queue UI"who receives the interface user Messenger Handler. The Messenger user interface handler then sends a message to queue data"to my vi data loop. (It is similar to the acquisition loop in the model of the CMA).
The loop of data vi is intended to read messages sent priority from the interface user Messenger Handler, such as start, stop, terminate. When he reads the startup message, he enters with the case of boot and continually performs a task once every milliseconds X. When sending a priority stop message, it should immediately cease to perform the tasks.
I think it should involve the data loop continuously sending messages to perform the task. In this way the priority message could easily slide forward and stops the process. Is that a correct implementation? If so, how can ensure me that the task is done at the right time?
Thank you!
Just to restate what Bob says...
The time-out period is as your source of synchronization. So, if no message has been received within the given time (negative expectations are infinite wait), then the queue returns the default value for the type of data (e.g. empty string to a string data type) and the release of "Timedout?" is set to TRUE. You can detect this and perform any action you want your intervaled rate.
The beauty of this Setup is that if something happened to you can handle immediately.
-
BlackBerry Smartphones how extend the number of rings before the message store?
'Help' was told go to: options - work - General settings - expand - number of rings, but I don't even have a working under options section... 9000 "BOLD"
Hi Welcome to the Forum and rubber boots
Just ring your service provider and ask them to increase the number of rings up.
It will be useful,
David
-
The unit always offline after message store to dismount/mount
Hello:
A customer recently had a problem where a disc filled and caused the message stores to disassemble. The unit entered into failsafe and queue of messages in the folder UnityMTA. Once the stores have been mounted again, never reconnected unit or resync would, until it has been restarted.
I can easily reproduce the problem by disassembly of the store and reassembling it. The unit never recovers. Sounds strange and it seems that it should return back once the store comes back online. ??
Unity 4.0 (3)
Exchange 2003
We get 4 events in the application log, as follows:
************************
Event type: WARNING
Event source: CiscoUnity_Notifier
Event category: run
Event ID: 1008
Date: 15/02/2005
Time: 22:58:29
User: n/a
Computer: UNIT-1
Description:
Received message 9 on NotifyQ for the user event
CN = jsabutis, cn = containers, or = HU_ADM, o = NMHU, which is not monitored. No Indication or
notifications will occur for this user. To correct, perform a resynchronization of all
MailUsers with UTIM: go to the properties of your integration tab and press on the
Resync button.
************************
Event type: error
Event source: CiscoUnity_MALEx
Event category: error
Event ID: 30003
Date: 15/02/2005
Time: 23:03:04
User: n/a
Computer: UNIT-1
Description:
An attempt to access the Bank of mailboxes Exchange primary by AvUMRSyncSvr via
MAPI failed. The MAPI subsystem returns the following error: the attempt of
Open a session on the Microsoft Exchange Server computer is not...
************************
Event type: error
Event source: CiscoUnity_MALEx
Event category: error
Event ID: 30012
Date: 15/02/2005
Time: 23:03:04
User: n/a
Computer: UNIT-1
Description:
One has occurred which prevents the Exchange managed by AvUMRSyncSvr via MAPI access.
It is generally an indication of problems with the unit configuration, Exchange,
or the MAPI subsystem.
Check that the unit service accounts are granted the correct permissions and
There are no problems with the installation. The SysCheck utility can help
diagnose the problem.
************************
Event type: error
Event source: CiscoUnity_Doh
Event category: error
Event ID: 32013
Date: 15/02/2005
Time: 23:03:04
User: n/a
Computer: UNIT-1
Description:
DOH connection failed due to the error of logon component of e-mail: 8004052eH
************************
I hope someone can explain this behavior.
Thank you
Vance
Is it fair that the messages are left to the UMR and subscribers are still able to connect? Or the connections of the subscriber fail too after Exchange is back online? If only the UMR, a restart of the UMR service restore service?
Looks like you see CSCed51091. It is corrected in SR1 3,0000 and 4.0 (4).
Thank you
Keith
-
On outlook express, I get the following error message "the message could not sent because the server rejected the sender's e-mail address. How can I eliminate this problem, please?
I can find no trace messages claim are waiting for shipment.Unsent Mail file, do you mean the Outbox? Check: File | Work offline and in: reviews | Layout: uncheck the preview pane and delete the messages. Otherwise, delete the Outbox.dbx file in the message store.
-
Corrupted Windows mail message store
When I open Windows mail a popup will appear indicating that the message store was damaged by a source outside of windows but no antivirus can detect a problem and it makes me lose all my files stored. Some used to recover, but recently, they have just disappeared. What's up with that?
Hello
You can rebuild the Windows mail store and check.
This method will help you rebuild the message store. By rebuilding the message store, only the messages that have no errors cannot be loaded and delete messages that contain errors.
To remove the Windows Mail message store file and then rebuild, follow these steps.
Step 1: Search for the message store
Find the folder that contains your personal message store. The message store is usually located in:
hard disk\Users\user\AppData\Local\Microsoft\Windows Mail
If it is not located there, you can find its location through Windows Mail. Follow these steps.
1. in Windows Mail, click Tools, then Options.
2. in the Options dialog box, click the Advanced tab, and then click the Maintenance button.
3. in the Maintenance dialog box, click the store folder button.
4. in the location dialog box to store, right click on your personal message store is located in the following folder, and then click Select all.
5. right click on your personal message store is located in the following folder, and then click on copy.
6. click on cancel or close to close all dialog boxes.
7. Click Start, right click on the search box and then click on paste to paste the your personal message store location in the box to start the search.
8. press ENTER. The folder that contains your personal message store opens.
Reference:
Messages may be stuck in the Outbox when you use Windows Mail on a computer that is running Windows Vista
http://support.Microsoft.com/kb/941090 -
I get to see all the messages that I deleted in my "Deleted items" folder and when I try to delete the message in this folder I get an error message 'some items in the folder "Deleted items" can not be deleted.' an error has occurred. Also when I try to delete my Inbox it won't move message from 'deleted items '. Any suggestions?
This is probably due to a mismatch between what is in the message store and which think that the database is in the message store. Try to compact and repair the database and see if that fixes the problem. See www.oehelp.com/WMUtil/
Steve
Maybe you are looking for
-
Toshiba Portege Z30 - A - Accupoint does not work
Hey there! I had a problem with the Accupoint, he moved alone, so I disabled it.But the problem is that I have also disabled the two buttons above the key. A is it possible to repair the Acupoint or disable without disabling the buttons? I have a Tos
-
Equium A100-027: unable to connect to D - LINK 514 router via WiFi with Vista
I HAVE PROBLEM WITH MY TOSHIBA EQUIUM A100-027 MOBILE TO CONNECT THE ROUTER D-LINK 514. I HAVE WINDOWS VISTA ON MY LAPOP. I can't get the laptop to connect to my network using its internal wireless card. He's going to detect it but when I click on co
-
Hello, I would ask how to divide the data to plot. According to the attachment, I want to split each data flow of n ° 1, stream n ° 2,..., n ° 1 of pressure, pressure No.2... to plot individually in the graph. I tried to use set, but it came out only
-
I've been having problems with my computer, I continue to send error reports, but apparently, no one throws a look at them at the other end, because I keep having the same problems. Is there really someone in Microsoft who take a look at the reports
-
I have a network home, consisting of an XP SP2 machine connected to a WRT54G Router and a MacBook, wireless connection. I have excellent signal strength and can connect to the internet without any problem, but rates of transfer between the two machin