The mouse driver

Similar Questions

• The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

  I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

  Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

  However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

• 'The installer does a not install automatically the mouse driver.  This driver must be installed manually. »

  I just installed VMware Workstation 7.1.3 and when I upgraded VMware on a Windows 7 Ultimate x 64 guest tools, I received the following error message:

  The Setup program has not automatically install the mouse driver.  This driver must be installed manually.

  Everything seems to work fine and there is no problem, indicated in the Device Manager.  My mouse driver (i.e. the VMware pointing device) is v12.4.0.6 and is dated 17/11/2009.

  Someone else has encountered this and is there a solution for this?

  Note that VMware Tools installed in Windows Server 2008 R2 x 64 with no problems.

  Rob

  Microsoft install (MSI) is a strange thing, these problems occur.

  The best way to update the VMWare Tools is to delete (and all other Windows drivers too), then install the new version.

  There is no solution to your problem.

• "Universal scroll" and "Auto-scroll" function to the wheel button has been removed from the mouse driver?

  I can no longer select 'Universal scroll' or "Auto-scroll" as actions for the wheel button.

  Hello

  I would say contact Microsoft Hardware support support team. They should be able to help you.

  Check out the link:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Strange behavior of the mouse after installing the updated driver

  Hello

  Windows Update suggested that I update the mouse and/or the keyboard driver detection. I don't remember the exact message.

  Also, I find no trace of this update in the box "Installed updates". It seems that the driver updates are not included.

  Symptom: Periodically, the screen scrolls upward around 3 lines, even through I'm even not touching the mouse. It's like the wheel was scrolled beyond a tick.

  This has never happened before this update of detection has been installed.

  Windows 64-bit Enterprise, USB Intellimouse Optical 1.1

  How can I find the update has been installed? How can I remove it?

  Thanks - ankle

  Hi MaskedAnkle,

  Thank you for using Microsoft Windows forum.

  If you want to see the updated story to update try the following steps to check the update has been installed for programs.

  1. open the control panel (all items view), and click the Windows Update icon. (See screenshot below)

  2. click on the link to view update history. (See screenshot below)

  3. to view the details of a single Windows Update-

  (A) select and right-click on a Windows Update list, and then click details. (See screenshot below step 4)

  (B) click on close when finished. (See screenshot below)

  4. to copy the details of an update of Windows unique to Clipboard-

  (A) select and right-click on a Windows Update list, and then click details.

  NOTE: It will be the same details in step 3, but in a text format instead.

  (B) you can now copy the contents of the Clipboard (ctrl + V) in a program such as Notepad or WordPad.

  If you think that the problem occurred after the installation of the update of the driver, you can restore the mouse driver and check if that helps.

  Steps to roll back a driver:

  #Open Control Panel Windows Device Manager.

  Manager #In of devices, look for the device that you want to restore the driver.

  #After find the material you are roll back the driver, right click on the name or the icon of the device and click Properties.

  #In the properties of the device window, click the driver tab.

  #On tab driver, click on the button return to the previous version.

  Note: If the button return to the previous version is disabled, Windows 7 doesn't have a previous driver to roll back to then you will not be able to complete this process.

  #Click the button Yes to the question "Are you sure you want to restore the driver previously installed software?".

  We now find the driver already installed. You should see the button return to the previous version is disabled when the roll back is finished.

  #Click the close button at the bottom of the screen of the device properties.

  #Click Yes in the system settings change dialog box that says: "your hardware settings have changed. You must restart your computer for these changes to take effect. You want to restart your computer now? »

  If this message is hidden, the close window command panel might help. You will not be able to close the Device Manager.
  
  Note: you are according to the device driver roll back, it is possible that you will not need to restart your PC. If you
  do not see the message, consider the complete rear roller.

  #Your computer will now restart automatically.

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed

  You can also try the system restore if the problem persists,
  See: http://support.microsoft.com/kb/936212/

  Hope this has helped

  Kind regards
  Aziz Nadeem - Microsoft Support

• I deleted the driver for the mouse and the mouse and the keyboard has stopped working.

  I had installed an updated driver mouse and mouse keep locking up. The Windows troubleshooting information indicates that I have to erase the disc from the mouse, and then reinstall the new mouse driver. When I deleted the mouse driver, the mouse and the keyboard no longer works.

  The computer is running Windows XP with Service Pack 3.

  The computer is one that I built several years ago.

  I tried the things:

  1. I tried the ALT, left SHIFT + Number Lock which is indicated as mouse keyboard operation who has worked in the past.

  Well it does not either from the keyboard is dead.

  2. I tried PS2 Mouse and a keyboard.

  3. I tried a keyboard and a USB mouse. The system shows new hardware found and he wonder then click NEXT to load the driver. No mouse, no keyboard, so no click.

  4. I can't get into the bios, because I can't hit keys to vector in the bios during startup.

  5. I tried to load the Windows XP disk, but the startup routine ask me to hit any key to boot from the CD.

  I have no mouse or keyboard control and therefore cannot respond to any action required by the system.

  Does anyone know a way to solve this problem?

  Solution of my wife - buy a new computer.

  Have a better solution for this problem?

  Thank you

  Bill

  Always try a PS/2 keyboard.  Maybe your PC is not able to access the BIOS, because the keyboard is USB.

  What make / model of the keyboard / mouse "kit"?

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.

• By pressing the scroll wheel of the mouse does not open link in a new tab

  Since the upgrade to Version 38.0.1, this action no longer works. I can right-click and select a link to open it in a new tab, but pressing the mouse wheel is no longer works as a shortcut.

  Please correct or advise if there is a setting that I can shape to get this feature.

  Thank you.

  It is with the middle clicking a link on a web page or is not all click workplace?

  Is required to work Ctrl and left click to open the link in a new tab?

  Have you checked the settings in the mouse driver software to click on the scroll wheel?

• How to untie the mouse button (mouse4 or 5)? I don't want it works as a ' back ' button.

  I have my mouse thumb buttons. Most people call them mouse4 and mouse5. Currently, one of them works as a 'back' button in the browser. I use this button for something else in another program, and I want to disable this feature in firefox.

  Please advise me on how to disable this feature in firefox. Would be nice if you can customize these mouse shortcuts.

  Unfortunately, driver mouse tip generates keyboard shortcuts for Firefox for these extra buttons; Actually, Firefox does not handle more than 3 buttons.

  In case the mouse driver sends the BACKSPACE key, you can set Firefox to ignore this.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste back and make a pause so that the list is filtered

  (2) in the search box that appears above the list, type or paste the back and make a break while the list is filtered

  (3) double-click the browser.backspace_action preference and enter the desired value:

  • 0 = > return (default)
  • 1 = > previous page
  • 2 = > ignore (in fact, nothing other than 0 or 1 does nothing)

  OK to save the change. You are finished.

  Is it that help at all?

  Otherwise, is what?

• The mouse pointer went crazy on NB100

  Started a download on the iTunes store, came back 30 minutes later to find my mouse pointer jump erratically in the vertical direction. Had to disable the synaptics pointing device driver and plug a USB mouse. After having rebooted and restart the mouse driver seems to work for most still until today where it does the same thing.

  If anyone else has experienced this? I came to the conclusion that the touchpad and keyboard on this device are just very poor indeed.

  Hello

  I never had a problem with my touchpad. I have to say that everything is working properly and also an external mouse/keyboard.

  Anyway, in your case, I would try reinstalling the driver for the touchpad, or have you tried it already? You can directly download the driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also, you should also try to reinstall iTunes. Maybe it s causing this problem

• HP Elitebook Folio 9470 m: questions of W7 to W10 - SD card reader & mouse driver device nonfunctional system + Base + BIOS admin pwd

  Hello

  I just upgraded my HP Elitebook 9470 m from Windows 7 to Windows 10. I have the following problems:

  1. base system device driver is missing

  When in Device Manager, warning sign. Troubleshooting cannot find driver. HP Support Assistant or the other.

  Hardware ID are

  PCI\VEN_197B & DEV_2392 & SUBSYS_18DF103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_18DF103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  2. SD card reader not working not

  I installed the latest driver (in the HP Web page) see below.

  TITLE: Alcor Micro pilot smart card reader

  VERSION: 1.7.43.22

  SoftPaq NUMBER: SP71725

  REPLACESP71304, no

  ENTRY INTO FORCE: 29/07/2015

  CATEGORY: Driver - storage

  SD card reader does not respond when SD card in and causes Explorer to stop working. In addition, whenever I have input SD card, internet (wifi) seems to stop working

  3 mouse issues

  I installed the latest driver (in the HP Web page) see below.

  TITLE: Mouse Synaptics Driver
  VERSION: 19.0.12.0

  SoftPaq NUMBER: SP72041
  REPLACES: none, none
  ENTRY INTO FORCE: 23/07/2015
  CATEGORY: Driver - keyboard, mouse and input devices

  Left stick button behave strangely. When you click to open a new tab in Chrome, it opens several or a - maximizes the window.

  4 admin password of BIOS

  I tried to install the update from the following BIOS

  TITLE: HP Notebook System BIOS Update

  VERSION: F.62
  
  SoftPaq NUMBER: SP74061
  ENTRY INTO force: 31 October 2015
  CATEGORY: BIOS
  SSM SUPPORTED: YES

  SUPPORTED DEVICES: N/A

  However, it asks me the password of the BIOS, and I seem to have forgotten. Launching (F7) HP SpareKey, it turns out that my BIOS user has a SpareKey enabled, but the user admin does not work. I'm looking for the BIOS password to install the BIOS update?

  I read responses indicating 'Reset BIOS default', or unpower battery CMOS. However, I have a dual boot with Ubuntu which I fear breaking. And I can't afford that as this is the only perfect way to use my laptop (compared to W10).

  Any help is appreciated.

  Thank you

  David

  Hello:

  You need the driver for the base system device JMicron card reader.

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe

  This would be the only issue that I can help you.

  You need to contact HP technical support to get a sort of BIOS file they will send you to unlock the BIOS P / w.

  I forgot what they call it.  Explain the situation... you need to unlock/reset the BIOS password you forgot.

  There is a history tab of revision on the file of the mouse driver that displays the newer versions you may want to try...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167606_1#tab-history

• Suddenly, the cursor doesn't move and does not respond to the mouse

  Hello
  All of a sudden the cursor stops moving. He is unresponsive to the mouse!  Even to turn off the computer, the cursor is passed.
  Specifications: Windows XP Professional, Version 2002, Service Pack 3.
  My friends you will suggest a cure?
  Newcomer.

  Hello

  From your description, it seems that you have problems with your cursor

  Please answer the following questions so that I could help you more

  (1) have you made any recent hardware / software change on your computer?

  (2) do you have a parallel operating system installed?

  Method 1: Fix the problem

  If you use an optical mouse, check if light underneath is on. If not reconnect the mouse of the CPU and check again. Check if the connection is loose.

  If it is already on, go to the method 2

  Method 2: A software patch

  If your material is perfect, there could be a problem with the software.

  Open the control panel by using your keyboard.

  Open 'Mouse' and make sure that all parameters are correct and meet your needs. After making any changes, press enter or the key used to apply.

  Method 3: reinstall

  Check the computer mouse driver. Go to 'Control panel' and open the 'System '. Choose "Device driver tab" and arrow down to '' mouse. '' Look and see if the driver is installed. If there is a yellow icon, the mouse has a problem. Uninstall the mouse and restart the computer. Reinstall the mouse driver and restart the computer.

  If you still have problems or you want to help, feel free to reply to this message.

  Ashwin0

• How can I get the mouse on properties of the mouse wheel

  It was there at the same time, I can't scorrol upwards or downwards

  Hello

  1. don't you make changes to your computer before the problem?
  2. What is the serial number and model of the mouse?
  3 - is a General USB mouse or advanced mouse?

  Follow the steps mentioned below and check if the problem persists.

  Step 1:

  It is very likely that the mouse driver was not fully detected or compatible with windows 7.  If you have a mouse advanced, I would say that you go to the manufacturer's Web site to download the compatible driver for windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2:

  You mentioned the presence of the rims option, in this case, I would have you to perform a System Restore to the point your mouse was working normally.

• the mouse jumps too many spaces

  I have Vista Home Basic Edition computer 530 dell inspirn.   When I right click pass a space with my Wired dell mouse that he jumps 2 03 places.  This happens with maps, photos and Internet games. even if I try to increase the font size by using the sign to expand it.  He did for a while but deteriorate.  I checked for updates on the mouse driver and he said everything was working ok. the mouse is compatible mouse microsoft HID. someone at Dell told me that it was a software problem, but does not tell me how to fix it.  Please help me if you have any sugestions.

  Hello Shirley,

  When you say that you right-click and it moves boxes do mean it that the mouse seems to be clicking several times whenever you click it once?
  It may just be a bad mouse or key clings. Maybe it's time to buy a new mouse or try a different mouse, to see if there is also this question.
  -Rob

• The mouse is out of order at startup

  It takes about two minutes to move my mouse quickly in front of my computer responds.  How can I fix?

  Hi CEHorton,

  1 when was the last time it was working fine?

  2. what type of mouse you are using? Is it wireless or wired?

  Method 1

  This can sometimes happen if the mouse driver is out of date or is in need of an update.

  I would say Hat you visit download of mouse manufacturer's website and install the latest driver for the device and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also the Microsoft article below and try them the steps if you are using a wireless mouse.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is originally from the mouse does not respond.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.