the name of the unknown parameter 'diagnostic_dest' during the upgrade to 11 g R1
Hellothe upgrade with the wizard of 10.2.0.4 on Win 2003 to 11 g R1 UPDATE and I got the following:
ORA-01034: ORACLE not available
ID de processus : 0
LRM-00101: unknown parameter name 'diagnostic_dest'
ORA-01078: failure in processing system parameters
Any idea?Thanks before.
Does the init.ora (for 10g House) used at the start, this database contain this setting? This parameter is only valid in 11g.
Tags: Database
Similar Questions
-
name of the unknown parameter 'ENCRYPTION '.
Hi all
I did a dmp file expdp for a table containing coulums encrypted.
But when I tried to use the ENCRYPTION setting to enable the encryption of the data in the dump file sets the command pormpt gives this error:
name of the unknown parameter 'ENCRYPTION '.
My Version of DB: 10.2.1.0.1This parameter cannot be used in DB 10 g?
You can do that in 10G as far as I KNOW...
I tried 10 does not work...
-
Hello
I use the latest version of iTunes and 160 GB iPod Classic. I create playlist and drag and drop the files there, he begins to synchronize the songs (update files to iPod, copy) but after a few songs, it gives me this error:
iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)
After clicking 'ok' on the error message, it shows that the iPod got synced up that song (for example songs 2456) but when I try to delete, for example, each piece in the last playlist so I can send all has couse again once I know not where is the last song, it freezes. I can't even click on safely remove the lower right, it does nothing. When I unplug the iPod and reconnect, it shows that the iPod memory is for example 10 gb full couse songs that got synced up to the error, but it shows them as "other". If I wait a few minutes, it automatically deletes and it for example shows 900 MB is full with others. If I wait for each selection to sync, which always occurs within a song at random, but the rest of the songs that I've waited sync appears as usual. But if I try to send new songs, the same error apears after 3-10 songs constantly. But after that I get the error again, the same thing happens in the freezing point. If I restore the iPod and you try to send the songs again he again Gets a thousands of songs, the process repeats...
I restored my iPod, I did on this topic of error checking. I use no bitrate convertion. Yes, I tried sending the same files after restoring the iPod, no error. Any ideas?
Thank you!I just use CopyTrans Manager to it. Everything went well.
-
Original title: OEM Windows XP Home SP3 update XP Pro
Here is a compilation of the messages from another forum regarding
My problem:
---------------------------------------------------------------I'm trying to upgrade a Windows XP Home Sp3 OEM system to
Windows XP Pro. (There are a few Pro features
that are not available in the House I now need: (1) the files offline and
(2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
I don't want a clean install, but an upgrade. I bought a Windows XP Pro
Upgrade CD on Ebay that was Windows XP Pro
Gold (v2002). I'm sure that's true for the following reasons:It has been listed as an upgrade, but the CD is not labeled "Upgrade".
It seems very authentic with all Microsoft holography.
He came in the standard package of Windows XP (without box),
and it was sealed.
The name of volume for the CD is WXPFPP_EN. The Internet,.
It is the retail of Windows XP Pro RTM (gold)!Here are things I tried initially.
(1) I tried to upgrade to Pro from the purchased CD. It is immediately
has refused to upgrade indicating the upgrade OS (Pro) is older than the
installed OS (home)...(2) I read about "slipstreaming". "Slipstreaming" allows to integrate
a service pack with an earlier version of the operating system. I created a
upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
Autostreamer later, but it made no difference) from the purchased CD
and a file containing SP3.After you burn the CD and start the upgrade
(Windows installation), the upgrade process
product through "information collection."
"Dynamic update" and "Preparation of Installation" with
no problems. My computer restarted and returned to
"Installation preparation". A progress bar called 'Progress '.
quickly filled to about 90% and the hanging system
at that time there for about 15 minutes.
Then, I got the following error message:Setup cannot set the required Windows XP configuration
information. This indicates an internal Setup error.This is where I am stuck. I had to leave the installation at this point.
My drive is starts raining and I had to restore a backup.(3) just for the heck of it, I formatted my hard drive and
reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
I immediately used my XP CD slipstreamed Pro to try one
upgrade to XP Pro and IT WORKED! I need to find out why the
properly clean XP Home OS upgraded to XP Pro but my pre-existing
(with the files users, drivers, etc..) XP Home OS does not level
successfully to XP Pro.
-------------------------------------------------------------Another post:
Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
I continue with installation of all the essential and the add-on
pilots (essentially all my original version). Then, I
set up a network connection and firewall. With this configuration,.
I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
success (even if the upgrade not configured my graphics
card properly). I guess my current problem is either the registry,
the WINDOWS, some user file or parameter file.
---------------------------------------------------------------Another post:
I made a file and the backup of the folder C:\Windows folder
on my system that is pre-existing (OEM XP Home Sp3). I also did a
separate the backup the State of the 'system' on my pre-existing system.
These are added my full image backup of her pre-existing
system a month ago.I did a backup image of my system (minimum fees OEM XP Home
SP3 with all the original installed drivers over a network configured
connection and a firewall configured). This system will upgrade
XP Pro with XP Pro SP3 slipstreamed CD successfully.Experiment 1:
I've restored my minimum system. I then restored the C:/Windows folder
and the State of the pre-existing system backup system. A startup
has managed (with a minor irritant). I had to activate Windows.
Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
at the same place during the upgrade and gave the same error as before:Setup cannot set the required configuration information Windows XP.
This indicates an internal Setup error.Experiment 2:
I've restored my minimum system. I then restored the system state only
the backup of the pre-existing system. After startup I was asked to
activate Windows, but answer Yes to the question would be to disconnect me
the system. I couldn't get connected to try the XP Pro upgrade.Experience 3:
I've restored my minimum system. I then restored only the C:/Windows
the backup of the pre-existing system folder. Once again, as in experiment 1,
the upgrade failed at the same place with the same error message.----------------------------------------------------------------
Before the experiment 3, I hoped that 3 experience would succeed so I
could conclude that I had a registry problem. I'm not sure now.
I don't know what to try next. Take the minimum system and reinstalling
my files of the user is not an option that my hard drive has over 200 GB of
programs! If I restore all files and folders of my pre-existing
I would still have backup to restore a system state the reliable (read the registry).
---------------------------------------------------------------------Sorry for the length! If anyone has any ideas I would appreciate your responses.
Thank you
Hello
This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.
For more information, see this link:
Error message: Setup cannot set the required Windows XP Configuration information
Hope the helps of information.
-
Hi all
I am getting error while importing using impdp, below help appreciated
Thank youparallel = 4 TABLE_EXISTS_ACTION=TRUNCATE CONTENT=DATA_ONLY dumpfile = DWHUSER_1:DWHUSERA1.dmp LOGFILE=test.log tables=Test.WAREHOUSE_DATES query=\"WHERE trunc\(WAREHOUSE_EXTRACT_DATE\)\>=\'31-DEC-10\'\" error LRM-00101: unknown parameter name 'trunc(WAREHOUSE_EXTRACT_DATE)\>' LRM-00113: error when processing file 'test.par'
user9356823 wrote:
Hi allI am getting error while importing using impdp, below help appreciated
parallel = 4 TABLE_EXISTS_ACTION=TRUNCATE CONTENT=DATA_ONLY dumpfile = DWHUSER_1:DWHUSERA1.dmp LOGFILE=test.log tables=Test.WAREHOUSE_DATES query=\"WHERE trunc\(WAREHOUSE_EXTRACT_DATE\)\>=\'31-DEC-10\'\" error LRM-00101: unknown parameter name 'trunc(WAREHOUSE_EXTRACT_DATE)\>' LRM-00113: error when processing file 'test.par'
Thank you
You don't need to 'escape' for what any character at the breast of parfile
-
LRM-00101: unknown parameter name
Hello
I am trying to set up standby in my test environment. I had problems with the log_archive_dest definition.
SQL > startup mount pfile = orcl.ora
LRM-00101: name of the unknown parameter 'rental '.
LRM-00101: name of the unknown parameter 'VALID_FOR '.
LRM-00101: name of the unknown parameter 'VALID_FOR '.
ORA-01078: failure in the treatment of system settings
This is part of my init.ora:
-bash-3, $00 archive_dest orcl.ora grep
*. Log_archive_dest_1 = 'location = / U01/oradata/ORCL/log VALID_FOR = (ALL_LOGFILES, ALL_ROLES) db_unique_name = orcl'
* .log_archive_dest_2 = "service = stan LGWR ASYNC VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE) db_unique_name = stan'"
* .log_archive_dest_state_1 = enable
* .log_archive_dest_state_2 = enable
Where is the error? What should I change to database startup?
Kind regards
Krystian* .job_queue_processes = 10
* .log_archive_config ='DG_CONFIG = (ORCL, Stan)
*. Log_archive_dest_1 = 'location = / U01/oradata/ORCL/log VALID_FOR = (ALL_LOGFILES, ALL_ROLES) db_unique_name = orcl'You have the problem here:
* .log_archive_config ='DG_CONFIG = (ORCL, Stan)
close this line with the support, and it will work!
Checked it?
Published by: aychin on July 7, 2009 04:24
-
Why firefox fails during the upgrade?
I have been using FF for several years. Three or 4 times during the process to upgrade FF loses open tabs and only load with a single tab (it's all right I can reopen). So, I waited for the next version 'stable' and then tried again until this successful.
I am running 19.0.2. The problem is that the upgrade creates two title bars (good name? At the top of the brower... which shows the title of the current page) and just generally looks like if effed-up top and icons are stripped, etc..
I searched: can someone direct me to the help page which addresses this problem.
Thank you!
SP3 for Windows XP, 2 GB of RamHello
Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.
(If you use it, switch to the default theme).
- You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
Once you get the pop-up, simply select "" boot mode safe. "
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. It might help others who have the same problem.
Thank you.
-
Authorization request during the upgrade of the application.
Hello
I have the problem with the permission of the application.
When I install the application, I get the message of trust application, but when I upgrade the application, I don't get the message of trust application but get the message "this application of [application name] has asked an http connection [link URL]" with checkboxes.
These permission prompts appear 7 times in my application for different URLS.
Why the permission is changed during the upgrade and how to avoid these prompts for permission?
What you see is what I see too. Updates seem to "revoke" the application permissions.
To work around this problem, I recommend to start the application, that it has the required permissions. The permissionsApiDemo is a good example of how to do this. If the application has lost permissions, then you must prompt the user for you give the appropriate permissions - new PermissionsApiDemo is a good example,
Don't forget that you can actually loose permissions in other ways, for example the user permissions of your application in editing parameters. If it pays check every time.
-
Hi all
DB: 11.2.0.3.0
EBS:12.1.3
O / s: Ss73erpintq01 SunOS 5.10 Generic_148888-05 sun4v sparc SUNW, SPARC-Enterprise-T5220
exisitng version java Apps pane:
Java $-version
Java version "1.6.0_51".
Java (TM) SE Runtime Environment (build 1.6.0_51 - b31)
Java hotspot Server VM (build 20, 51 - b02, mixed mode)
ORACLE_HOME--> /t001/test1/apps/tech_st/10.1.2
Le patch 4377566 is already used in the system. After the upgrade to jre 1.7.0.45, when to raise forms, he throws the error: too low Jinitiator 1.1.8.2
Could you get it someone please let me know what is the cause of this problem and the solution I have for the time being back to 1.6.0.51 and able to open forms.
output:
./txkSetPlugin.sh 17045
/T001/Test1/apps/apps_st/appl/FND/12.0.0/binFrom script to upgrade the interoperability...
Send log output to file:
/T001/Test1/inst/apps/test1_hostname/logs/txkSetPlugin.log
Using the context file:
/ T001/test1/inst/Apps/test1_hostname/Appl/admin/test1_hostname. XML
The APPLSYS file using:
/T001/Test1/apps/apps_st/appl/APPStest1_hostname.env
Enter the password for the database user, Oracle [APPS] applications: sysq01appsThe use of /t001/test1/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java to run java programs
Getting values of parameter of J2SE...
Copy oaj2se.exe to html dir...
Copying /t001/test1/apps/apps_st/comn/webapps/oacore/util/jinitiator/j2se17045.exe to t001/test1/apps/apps_st/comn/webapps/oacore/html/oaj2se.exe...
Back up the Application context file...
/ T001/test1/inst/Apps/test1_hostname/Appl/admin/test1_hostname. XML to /t001/test1/inst/apps/test1_hostname/appl/admin/test1_hostname.xml.prej2se17045
APPSWEB file /t001/test1/inst/apps/test1_hostname/ora/10.1.2/forms/server/appsweb.cfg usingSave the appsweb file...
Backup of /t001/test1/inst/apps/test1_hostname/ora/10.1.2/forms/server/appsweb.cfg to /t001/test1/inst/apps/test1_hostname/ora/10.1.2/forms/server/appsweb.cfg.prej2se17045
Updating with new settings of J2SE XML context file...
Update plugin J2SE jdk
J2SE mimetype to 1.7.0_45 update
J2SE Classid to CAFEEFAC-0017-0000-0045-ABCDEFFEDCBA updateThe log file for this session is located in the: /t001/test1/inst/apps/test1_hostname/admin/log/11040625/adconfig.log
AutoConfig is to configure the application environment...
AutoConfig will consider custom templates if it is present.
Location CONFIG_HOME by: / t001/test1/inst/apps/test1_hostname
Classpath: /t001/test1/apps/apps_st/comn/java/lib/appsborg2.zip:/t001/test1/apps/apps_st/comn/java/classesUsing the context file: /t001/test1/inst/apps/test1_hostname/appl/admin/test1_hostname.xml
Value of context management will now update the context file
Updating the file context... COMPLETED
Attempt to download file context and patterns of database... COMPLETED
Set up templates of all the summits of product...
Configuration AD_TOP... COMPLETED
Configuration FND_TOP... COMPLETED
Configuration ICX_TOP... COMPLETED
Configuration MSC_TOP... COMPLETED
Configuration IEO_TOP... COMPLETED
Configuration BIS_TOP... COMPLETED
Configuration AMS_TOP... COMPLETED
Configuration CCT_TOP... COMPLETED
Configuration WSH_TOP... COMPLETED
Configuration CLN_TOP... COMPLETED
Configuration OKE_TOP... COMPLETED
Configuration OKL_TOP... COMPLETED
Configuration OKS_TOP... COMPLETED
Configuration CSF_TOP... COMPLETED
Configuration IGS_TOP... COMPLETED
Configuration IBY_TOP... COMPLETED
Configuration JTF_TOP... COMPLETED
Configuration MWA_TOP... COMPLETED
Configuration CN_TOP... COMPLETED
Configuration CSI_TOP... COMPLETED
Configuration WIP_TOP... COMPLETED
Configuration CSE_TOP... COMPLETED
Configuration EAM_TOP... COMPLETED
Configuration FTE_TOP... COMPLETED
Configuration ONT_TOP... COMPLETED
Configuration AR_TOP... COMPLETED
Configuration AHL_TOP... COMPLETED
Configuration OZF_TOP... COMPLETED
Configuration IES_TOP... COMPLETED
Configuration CSD_TOP... COMPLETED
Configuration IGC_TOP... COMPLETEDAutoConfig completed successfully.
Fact
you have mail in/var/mail / / applmgr
[applmgr:hostname:test1 t001/test1/apps/apps_st/appl/fnd/12.0.0/bin]
$ grep-i COFFEE $CONTEXT_FILE
< sun_clsid oa_var = "s_sun_clsid" > CAFEEFAC-0017-0000-0045-ABCDEFFEDCBA < / sun_clsid >
< jinit_clsid oa_var = "s_jinit_clsid" > CAFEEFAC-0016-0000-0007-ABCDEFFEDCBA < / jinit_clsid >Thanks for your time,
Kind regards
Hi Hussein.
I tried and got the fix for the error - Jinitiator 1.1.8.2 too low during the upgrade to jre 1.7.0.45
Difficulty:
Set the following value in the setting of the jre 1.7.0.45 Panel-> icon of 32 bit java-> java-> view (tab)
-Djava.vendor = "Sun Microsystems Inc."
Later, I was able to access the Forms/applications in a new browser.
Thank you
-
Hi Experts,
I've recently upgraded to oracle 11.2.0.1, using DBUA, 10g 10.2.0.4.
While the upgrade progress there are few popup warning messgae appeared and said: there where some invlid identifier and animals like that.
Given that I was not able to joint the screenshot, I write just the warning message which has emerged over the upgradation.
Note: when about 40% of the progression that I started to have a popup of warning with the following messages.
Popup1: ORA-01422: exact fetch returns more than number of lines
Popup2: ORA-00904: "S". "" TARGET_GUID ": invalid identifier
Popup3: ORA-04063: package body "SYSMAN MGMT_PAF_UTL: error".
ORA-06508: PL/SQL: called program unit is not found
Popup4: ORA-06550: line 5, column 39
PLS-00302: component 'JOB_TYPE_ID' must be name
.
.
.
Popup-N
Note: update has been completed successfully and exhausts with any issues.but I'm worred about the impact of the pop-up window which appeared during the upgrade.
Please let me know which will cause serious problems anywhere a moment later.
Thanks in advance
Kind regards
SalaiHello
This error seems responsible for the company. Check the log of alert for possible errors.
Hope that these errors should not create problems.
Kind regards
A H E E R X -
Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
Tried running firefox.exe Pei but error message:XML parsing error: the undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line 18, column 1:
"< dialog < =" "^ =" "p =" "> < / dialogue >Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.
Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)
-
What should I stop time machine during the upgrade at El Captian?
Do I have to stop the machine in time during the upgrade to El captain?
N °
Make sure that your Mac meets the requirements > update of OS X El Capitan
-
Failure during the upgrade to El captain
Hello
Trier just to run the El captain of my Mac Book Pro late 2008, 500GB, 4 GB upgrade Yosemity.
After several attempts, I have to capitulate.
The Message is that the absence during the installation and the options are retry and save the log file.
Before the upgrade, it worked very well with all the problems.
Have been looking for solutions and I do not know if the recovery online could help me!
I don't have a lot of work put in Photo I am very interested with a recovey that saves my work...
(Yes, I was to stupid to do a backup before the upgrade)
Any chance of recovering the contents of my HD
Allan continues
This could be a missing file that had not resulted in anything until an update. I had to save and clean install the operating system. I had a similar problem and take mine to the Apple Store to be fixed, it turns out was a broken HD support, who can apparently cause this problem. You must back up either with Time Machine or external plug your hard drive to another computer and copy the files you want to save. (TimeCapsule is easier), then take it in to be looked at, they can run Diagnostics on the Apple Store.
See you soon,.
Adam
-
Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?
You chose the option in iTunes to download the firmware first and install it in a second time after that?
-
Protection of the projects during the upgrade of the Lion in Yosemite
Hello world! Does anyone know how to protect themselves from projects during the upgrade of the Lion to the operating system of Yosemite? I heard shops of the horror of people the upgrade of an operating system to another and then having to rebuild their projects in the new operating system and I want to avoid if I can. If there is no way to do so, any ideas on the record of ongoing projects would be greatly appreciated. I have been turned off of this update forever and you have to do as soon as POSSIBLE. I'm currently under OS X 10.9.5 and FCPX 10.1.4. Thank you!
10.9.5 are Mavericks. Could indicate you these horror stories? They may contain information that is largely obsolete. You want to check any third-party software and plugins to make sure they are compatible with the latest operating system.
Maybe you are looking for
-
How to recover HP Recovery Manager after replacing a new hard drive
Recently I have lots of BSOD saying Bad_System_Configuration_Info and I ran a boot hp test and my hard drive failed the short DST test, so I looked online and it says that this means that my hard drive has failed. IM planning to buy a new hard drive.
-
Happy face of Smartphones blackBerry icon
Suddenly, a Happy Face wearing the number 1 appears on my screen. -What this means and how can I remove it? Thank you.
-
find a driver 4 a brother HL 2040 laser printer
I have a new SONY laptop and need to connect your phone to the above. Help.
-
Hi allI have a sample of data and I have provided the scripts below.create the table test_data(deptcode varchar2 (10), hid number, number of applevel, approver_employee varchar2 (10))Insert into test_datavalues ('051 ', 1,1,'1487 ');Insert into test_
-
Creating cloud works only on mac
I have a new plan of cloud creative and downloaded lightroom, but it's not the full program and it does not work. I have no explanation for this problem, if someone can give a help? Thank you very much