name of the unknown parameter 'ENCRYPTION '.

Hi all
I did a dmp file expdp for a table containing coulums encrypted.
But when I tried to use the ENCRYPTION setting to enable the encryption of the data in the dump file sets the command pormpt gives this error:
name of the unknown parameter 'ENCRYPTION '.

My Version of DB: 10.2.1.0.1

This parameter cannot be used in DB 10 g?

You can do that in 10G as far as I KNOW...

I tried 10 does not work...

Tags: Database

Similar Questions

  • the name of the unknown parameter 'diagnostic_dest' during the upgrade to 11 g R1

    Hello
    the upgrade with the wizard of 10.2.0.4 on Win 2003 to 11 g R1 UPDATE and I got the following:
    ORA-01034: ORACLE not available
ID de processus : 0
LRM-00101: unknown parameter name 'diagnostic_dest'
ORA-01078: failure in processing system parameters
    Any idea?
    Thanks before.

    Does the init.ora (for 10g House) used at the start, this database contain this setting? This parameter is only valid in 11g.

  • Smartphones blackBerry how to retrieve the user name for the email parameter?

    Hi, I need to change my e-mail settings. I tried to do, but he asks my username. I remember my password but not my user name. is there a way you can get it back?

    In this case, the person that you talked was misinformed. You have no free method to contact RIM. The full support of the RIM starts with the carriers. If they can't solve it, they are supposed to degenerate into RIM. But you can't go around them and get rim directly. So, call them climbing back and demand.

    Good luck!

  • LRM-00101: unknown parameter name

    Hello
    I am trying to set up standby in my test environment. I had problems with the log_archive_dest definition.

    SQL > startup mount pfile = orcl.ora
    LRM-00101: name of the unknown parameter 'rental '.
    LRM-00101: name of the unknown parameter 'VALID_FOR '.
    LRM-00101: name of the unknown parameter 'VALID_FOR '.
    ORA-01078: failure in the treatment of system settings

    This is part of my init.ora:
    -bash-3, $00 archive_dest orcl.ora grep
    *. Log_archive_dest_1 = 'location = / U01/oradata/ORCL/log VALID_FOR = (ALL_LOGFILES, ALL_ROLES) db_unique_name = orcl'
    * .log_archive_dest_2 = "service = stan LGWR ASYNC VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE) db_unique_name = stan'"
    * .log_archive_dest_state_1 = enable
    * .log_archive_dest_state_2 = enable

    Where is the error? What should I change to database startup?

    Kind regards
    Krystian

    * .job_queue_processes = 10
    * .log_archive_config ='DG_CONFIG = (ORCL, Stan)
    *. Log_archive_dest_1 = 'location = / U01/oradata/ORCL/log VALID_FOR = (ALL_LOGFILES, ALL_ROLES) db_unique_name = orcl'

    You have the problem here:

    * .log_archive_config ='DG_CONFIG = (ORCL, Stan)

    close this line with the support, and it will work!

    Checked it?

    Published by: aychin on July 7, 2009 04:24

  • LRM-00101: unknown parameter name ' trunc (WAREHOUSE_EXTRACT_DATE)------> ' in EMR.

    Hi all

    I am getting error while importing using impdp, below help appreciated
    parallel = 4
TABLE_EXISTS_ACTION=TRUNCATE
CONTENT=DATA_ONLY
dumpfile = DWHUSER_1:DWHUSERA1.dmp
LOGFILE=test.log
tables=Test.WAREHOUSE_DATES
query=\"WHERE trunc\(WAREHOUSE_EXTRACT_DATE\)\>=\'31-DEC-10\'\"

error 

LRM-00101: unknown parameter name 'trunc(WAREHOUSE_EXTRACT_DATE)\>'
LRM-00113: error when processing file 'test.par'
    Thank you

    user9356823 wrote:
    Hi all

    I am getting error while importing using impdp, below help appreciated

    parallel = 4
TABLE_EXISTS_ACTION=TRUNCATE
CONTENT=DATA_ONLY
dumpfile = DWHUSER_1:DWHUSERA1.dmp
LOGFILE=test.log
tables=Test.WAREHOUSE_DATES
query=\"WHERE trunc\(WAREHOUSE_EXTRACT_DATE\)\>=\'31-DEC-10\'\"

error 

LRM-00101: unknown parameter name 'trunc(WAREHOUSE_EXTRACT_DATE)\>'
LRM-00113: error when processing file 'test.par'

    Thank you

    You don't need to 'escape' for what any character at the breast of parfile

  • Unknown channel or name of the repeated feature - settings MAX IVI

    Hi all

    I have problems with the creation of a pilot application based on IVI. I use Agilent N6700B PowerSupply simply configure and output voltage via GPIB with LV2009 (and Win7). The main issue is with the name of the 'channel' I need to specify in the application. Could someone please confirm ChannelName should I use and if the MAX settings are correct? I have attached all necessary files.

    When I run my application I get following "IviDCPwr IVI Converter.vi error error message

    The primary error: unknown channel (Hex 0xBFFA0020) or
    name of the feature repeated.

    Complete calling chain:      IVI IviDCPwr
    Error Converter.vi IviDCPwr
    Configure the output Range.vi GPIB.vi"

    Any help is very appreciated

    Kind regards

    PK

    Hi, PKI,

    The correct physical name for the channel is '1' and it was filled for you by the driver under the advanced > Instrument Driver Software Module (see MAX1.jpg). You can name your virtual channel name well you want under the pilot Sessions > section virtual names, but the physical name must always be 1 as specified in the driver (MAX2.jpg). In your application, make sure that you use exactly the same name for the virtual channel as recorded in MAX.

  • iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)

    Hello
    I use the latest version of iTunes and 160 GB iPod Classic. I create playlist and drag and drop the files there, he begins to synchronize the songs (update files to iPod, copy) but after a few songs, it gives me this error:
    iTunes could not copy (name of the song) to the iPod (ipod name) because an unknown error occurred (-50)
    After clicking 'ok' on the error message, it shows that the iPod got synced up that song (for example songs 2456) but when I try to delete, for example, each piece in the last playlist so I can send all has couse again once I know not where is the last song, it freezes. I can't even click on safely remove the lower right, it does nothing. When I unplug the iPod and reconnect, it shows that the iPod memory is for example 10 gb full couse songs that got synced up to the error, but it shows them as "other". If I wait a few minutes, it automatically deletes and it for example shows 900 MB is full with others. If I wait for each selection to sync, which always occurs within a song at random, but the rest of the songs that I've waited sync appears as usual. But if I try to send new songs, the same error apears after 3-10 songs constantly. But after that I get the error again, the same thing happens in the freezing point. If I restore the iPod and you try to send the songs again he again Gets a thousands of songs, the process repeats...
    I restored my iPod, I did on this topic of error checking. I use no bitrate convertion. Yes, I tried sending the same files after restoring the iPod, no error. Any ideas?
    Thank you!

    I just use CopyTrans Manager to it. Everything went well.

  • How to get the name and number of the procedure parameter list or a function?

    I stated the procedure described in the package

    If I want to get the number and the name of the parameter list, so how do I it

    I don't have I her name with the package.

    create or replace package demoApp is

    PROCEDURE insert_data (p_fname IN VARCHAR2,

    p_lname IN VARCHAR2,

    p_address IN VARCHAR2,

    p_cellno IN VARCHAR2,

    p_email IN varchar2);

    end demoApp;

    create or replace package demoApp body is

    PROCEDURE insert_data (p_fname IN VARCHAR2,

    p_lname IN VARCHAR2,

    p_address IN VARCHAR2,

    p_cellno IN VARCHAR2,

    p_email IN varchar2) IS

    EmpID number;

    BEGIN

    Select nvl (max (emp1.empid), 0) + 1 in EMP1 empid;

    INSERT INTO VALUES EMP1 (empid, p_fname, p_lname, p_address, p_cellno, p_email);

    EXCEPTION

    WHILE OTHERS THEN

    raise_application_error (-20001,' insert the problem ' |) SQLERRM);

    END;

    end demoApp;

    -----------------

    I want to get the name of the parameter and the number of use of stroredrprocedure ""demoApp.insert_data " "

    Select *.

    of all_arguments

    where package_name = 'DEMOAPP.

    and object_name = 'INSERT_DATA.

  • ERROR: The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

    Hello

    I am writing a script to create the new VM (base clone of a virtual machine) in a specific folder.

    When you run the script, I get an error:

    The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

    Some research led me to a post of 2011, which describes the same error. The only thing is, I can find no trace of open connection and then a more...

    What I tried:

    I run the script on the server for vSphere, so I closed the open vSphere client.

    closing ('disconnect-viserver") all existing connections in the first line of the script-> an error because no connection is open.

    In several places in the script, add the following lines:

    ECHO ' - '.

    $DefaultVIServers <-as noted in the post of 2011

    ECHO ' - '.

    This shows that no connection is open until I do the "connect-viserver", subsequently, apparently, that a connection is established.

    the results and the (current) script are found in the files to attach.

    I also found an error on the "set-PowerCLIConfiguration that I can't explain.

    One last question... Is there a possibility to have the new virtual machine created through 3 hosts? the first on the first host, the second on the second, the third on the third, the fourth back on the first host,... and so on?

    Any help would be appreciated.

    Thank you.

    Johan

    Of course, you can provide the full path, for example see my post of folder by Path .

  • Why the file name of the file as an attachment with Annotations "attach a file" (trombone) become unknown when the observations are published?

    Our company recently purchased Adobe Acrobat Pro XI intended to be used for shared electronic reviews.  We use the send for shared review in Adobe Acrobat Pro XI, and all the comment tools work as expectedexcept the trombone in Annotations.

    When a Word or Excel or Image (png, jpeg) file is attached using the trombone of Annotations, the initiator may initially see and open. But once feedback is enabled and the review file is closed, the file 'Name' becomes 'Unknown' (even if the Description is the correct file name and extension).  Change information are unknown, such as size and compressed size.

    When the control file is then reopened, even the initiator cannot open the file, although:

    • The location of the file is marked with the paper clip in the document.
    • The file name is displayed in the list of comments with the name of the initiator.
    • In the list of attachments (the paper clip under the thumbnails and bookmarks), the name appears as unknown, shows the file name Description, update is unknown, the size is unknown and compressed size is unknown.


    The file name cannot be published, although the Description file can be.

    We have followed the procedure described in the tutorials but may not know how to resolve this situation.  As this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please leave out the basics because we are new users.

    We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI is a Windows platform.  Can someone please give us some advice how to get this function runs as described?

    The bug is fixed in the latest Adobe Acrobat Pro XI 11.0.09 update (update: in Acrobat Pro, go to help-> Check for Updates...).

    -Rohit Sharma

  • Name of the listener and the LOCAL_LISTENER parameter

    Version: 11.2.0.2
    OPERATING SYSTEM: AIX

    We have five DBs 11.2 running on a server. A listener 11.2 (on the default port) serves all these five DBs. The name of the listener is
    LSNRJK11G 
    But when I connect to one of these DBs and interrogate the parameter LOCAL_LISTENER, the value appears as
    listener_<dbname>
    For example, if I connect to a database named facdb, I get the below
    SQL> show parameter local_listener

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
local_listener                       string      listener_facdb
    Why is the name of the listener that is different here?
    When I asked my colleague who set this up, he said when he tried with the name real listener to help
    alter system set local_listener = 'lsnrjk11g' scope = both;
    There has been a mistake. He does not remember that it was the error

    Published by: Kavanagh on December 15, 2011 12:16 AM

    Check your tnsnames.ora file, there will be an entry like

    listener_facdb =
 (ADDRESS_LIST =
   (ADDRESS = (PROTOCOL=TCP) (HOST= danube103) (PORT=31415))
 )

    When you create a listener on a non-default port, PMON should be able to register the database with this listener services.
    PMON used tnsentry method of naming for this. PMON will seek in the tnsnames.ora file for the value he finds in LOCAL_LISTENER.
    If it does not find this entry in the tnsnames.ora file, it will throw error.

    Alternatively, you can simply use

    alter system set local_listener='(ADDRESS = (PROTOCOL=TCP) (HOST= danube103) (PORT=31415))' scope = both;

    But it is not very readable. Is it?

  • Name of the table as parameter of function

    Hi all

    can someone help me with the below question...

    I have a function like this:

    * create or replace *.
    * the 'IL_SUM_AVG_FN' function return number is *.

    * the cursor c1 is *.
    * Select sum_avg_val value *.
    * from wel_10_tab *.
    * where type = '1'; **
    * number of v_sum; **
    * number of v_count; **
    * BEGIN *.
    * v_sum: = 0; **
    * v_count: = 0; **
    * for i looped c1 *.
    * if v_count = 0 then *.
    * v_sum: = i.value; *
    * other *.
    * v_sum: = abs (i.value + v_sum); **
    * end if; **
    * v_count: = v_count + 1; **
    * end of loop; **
    * return v_sum; **
    * END; **


    now my requirement is like... I want to pass a value as a parameter to the function... say I'll or11 10 or 12
    then he should change the table name in the cursor according to the parameter.i.e
    If the setting is 10, it should be: select sum_avg_val value in wel_10_tab where type = '1';
    If the setting is 11 it should be: select sum_avg_val value in wel_11_tab where type = '1';
    If the parameter is 12, you must: select sum_avg_val value in wel_12_tab where type = '1';

    parameter only has these three possible values...
    How to get there?
    Help, please...

    Sybrand already showed you how to manage the setting if you look at its code.

    You need the dynamic sql statements because you can't pass the names of tables in pl/sql standard.
    His example has dynamic sql.

    So now you must only adapt to your needs.

    Default you may have a separate slider for each table name and choose the cursor based on the name of the table that is passed.

    Those are your only 2 realistic options at this stage.

  • Display of a user name, but the sending in the value of the parameter username

    Hello

    I have a parameter named User and I need the column of user names from the drop-down list, but I need to send the value of username corrsponding to my settings. Please let me know if there is a way for this publisher of BI in.

    Thank you
    DY

    When you create a list of values for the parameter, your sql should have two columns in the select statement:

    Select user_name as name, user_id ID
    from table_name

    Name appears but user_id is returned. -Change the sql as required.

    Create the User_ID parameter (let's say it's ID), then use the created list.

    In your datamodel, you can filter by User_ID as: select * from table where user_id =: User_ID

    Hope that helps.
    Bipuser

  • ORA-01504: name of the 'DEV1' database does not match parameter db_name "PROD1".

    Hi, all.

    This is my first time cloning of a database. Recovery finished, but gave me the following error message. All parameters in the pfile file are on 'DEV1 '. I think that the db_name "PROD1" parameter exists in the control file and causes this error. The control file is under ASM.

    How can I change the setting in the control file and raise the cloned database 'DEV1 '? Also, how can I avoid this problem next time I make a clone?

    Thanks in advance!


    Oracle 10g Release 2 under RHEL5

    Database cloning using RMAN Duplicate > ORA-01504: "DEV1" database name does not match "PROD1" db_name parameter
    ASMCMD> ls
control01.ctl
current.275.729098001
    archive log filename=/u001/dbsvr/dev1/1_131706_653848580.dbf recid=59 stamp=741953991
media recovery complete, elapsed time: 00:09:31
*Finished recover at 01-FEB-11*
contents of Memory Script:
{
   shutdown clone;
   startup clone nomount ;
}
executing Memory Script

database dismounted
Oracle instance shut down

connected to auxiliary database (not started)
Oracle instance started

Total System Global Area     725614592 bytes

Fixed Size                     2075592 bytes
Variable Size                448791608 bytes
Database Buffers             268435456 bytes
Redo Buffers                   6311936 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DEV1" RESETLOGS ARCHIVELOG
  MAXLOGFILES     50
  MAXLOGMEMBERS      5
  MAXDATAFILES      100
  MAXINSTANCES     1
  MAXLOGHISTORY     5445
 LOGFILE
  GROUP  1 '+DATA3/dev1/datafile/redo01.log' SIZE 100 M ,
  GROUP  2 '+DATA3/dev1/datafile/redo02.log' SIZE 100 M ,
  GROUP  3 '+DATA3/dev1/datafile/redo03.log' SIZE 100 M
 DATAFILE
  '+DATA3/dev1/datafile/system01.dbf'
 CHARACTER SET WE8ISO8859P1

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/01/2011 10:30:17
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'

RMAN>
RMAN> **end-of-file**

RMAN>

    db_name parameter and database name must match. There is an incorrect db_name parameter in your target pfile database file!
    Best: there should not be any db_name parameter at all.

    Note: the name of the database is also in the controlfile.

    -----------
    Sybrand Bakker
    Senior Oracle DBA

  • RTF &lt;? call the name of the model?: &gt; the parameter syntax

    All, Hy

    Can I use <? : name of the model? > syntax to define a model inside my rtf. It works fine when I call with <? call the name of the model?: >

    But I want to send a parameter in the model, what is the syntax (not in xsl)?

    the doc does not explain the syntax of the parameters:

    Model call
    Use this element to call a model named to be inserted or applied to the current
    model. For example, use this feature to return a table several times.
    The XSL syntax: < xsl: Call-template name = "name" >
    BI Publisher Tag: <? call the name of the model?: >


    Thank you for your answers

    TBW version: 10.1.3.4.1

    Syntax for definition of model will be like



    ..
    Designated by the setting $param1 here
    ..

    and you can call it as




    Check out the blog below for an example
    http://blogs.Oracle.com/XmlPublisher/2006/04/more_subtemplates.html

Maybe you are looking for