The passage of clips to the timeline?

Similar Questions

• Slide the 2nd clip in the timeline removes audio

  When I drag a clip in the timeline to a new project, it fits perfectly. When I drag a clip in the timeline in this same project, will move in the video, but no audio signal is included.

  I have not had this problem before, thought my videos are from the same camera: Panasonic AVCHD. But I could make a mistake somewhere in the workflow as it is the first major project, I am in train from the passage of Final Cut Pro. I have copied my raw images to an external HD, created a new project and then choose file > import. I pointed out in the record of the raw images and a few seconds, it has imported everything. (In FCP, I'm used to it converting the images into a Quicktime format, but first seems happy to work with AVCHD).

  The original film is more than an hour long, so the camera has divided it in 4.29 GB of files. Will all PLAY in the window of project very well, so I know the audio is there, but when I drag them in the timeline, the audio is not allowed to go with her.

  I have even a clip exported and it re-imported as a QT file. NO other clips cannot be added to the timeline with their audio intact.

  I am grateful for ideas or suggestions!

  Mark

  You probably forgot to patch source track.

  

• All clips in the timeline are now displayed as a long clip

  It's weird. I opened a project I was working on today, and the timeline was empty. I then added the clip "synchronized" one in order to recreate it. Instead of the clip new gross being added to the now empty timeline, the entire project has reappeared. But all change them points, transitions, etc. disappeared. It renders correctly but, for example, when I got the text at the end in, there is no text, or fade out. Basically nothing. There as if final cut imported the finished exported file, I did yesterday. When I click on the large file in the timeline panel and go to the video properties section it says: location-(several files). But there is nothing to reveal in finder. I also tried to load a backup yesterday with exactly the same result. In the clip basically there is no way to go back and turn effects or change anything as it is rendered completely. Also, I made, and it has not been turned in a compound clip.

  IT seems that you used the opening according to the timeline and under the direction of your whole movie in the container clip of sync.

• Adding clip at a specific time on the timeline

  This seems to be a very simple task, but I'm pulling my hair out trying to understand this.

  When you put the clips in the timeline, imovie, they automatically move at the end of the previous element, all the way to the left of the timeline. Is it possible that you can move a clip at a specific point in the timeline, say, 01:30, but a gap of no content between 0 and 01:30? I have an audio track at the moment and I try to sync the audio clips, but I take pieces out one at a time and don't want any film from start to finish crafts. There MUST be a way to put videos where I want, at the top of the audio without having to move and attach it to the previous item. I want to just place them where I want to, at some point, and they have to stay there.

  I updated my software and iMovie version (I'm on a macbook pro).

  No, you can only leave spaces between clips in the main FCP timeline.  However if you put a (probably black) background in the iMovie timeline and extend to the duration of the video, then you can put top clips whenever you like and it will display when you play the movie (picture in picture).

  Geoff.

• iMovie 10.1.2 adjust the size of the clip in the timeline

  When I move a clip in the timeline, the size is reduced to a point where I can't move titles correctly.  I tried the setting of the slider, but it does not affect the components of the package.

  Hi, David,.

  You use the scroll bar that you get when you click the gear in the top middle of your screen.  This bar only works on clips in the clips pane, not in the time line.

  The slider beside the button settings in the middle right side of your screen expands the time line so that the clips in it are spread out more.

  Also, if you click on the settings button, a dialog box appears that contains a scroll bar to adjust the size of the clip in the timeline.

  Hope this helps,

  -Rich

• Can cut is no longer clips of media to drag in the timeline of the movie

  Once I have download media, and I create a movie in iMovie, I am no longer able to highlight the small clips of media uploaded to slide on the timeline of the movie.  I did this for years with ease, but now when I upload media (let's say it's a 90 minute video), when I touch the clip it highlights the whole thing instead of letting me choose that it contains.  Any help would be great!

  Yes, there was a change in the last update to iMovie.  The default is now to choose the full clip.  To select a part of a clip in an event that you have pressed the 'r' key while you move the cursor over the area you want to select.  An alternative is to position the cursor at the beginning of the selection and press 'i' and then place the cursor at the end of the selection and press 'o'.

  Geoff.

• My project disappeared from the timeline.  All the clips are still there, but I can't get back them on the timeline.

  My project disappeared from the timeline.  All clips are in the screen preview, but I can't get the project to appear on the timeline.

  Search in projects in smart collections.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• audio clip WAV plays is not in Final Cut Pro (unless in the timeline)

  I have a few audio dialog recorded externally on syncing with my videos. It is in format wav 24-bit / 48 kHz. The problem is the audio clips will not play participate in event viewer so that I can revisit. To be more precise, when I hit the space bar the cursor moves along the clip, audio level indicators move up and down as if it is being read, but I have no audio output. However, if I drop the audio clip in the timeline panel, press space - it plays perfectly!

  Clues of what happens anyone?

  Thank you.

  10.2.3 FCPX

  Try to convert the audio 16 bit @48 kHz .aiff.

  The audio as it is, very probably turned in the Timeline to conform to the parameters of the project on the fly.

  Al

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• Extension video Clip in the Timeline

  MBP Yosemite

  iMovie: 10.1.1

  Why it sends me in trouble? It's simple. I imported a 30 minute video in my area of projects. I just want to take all of the video in my calendar. I note the entire clip, but when I drag in the timeline, it spread like the whole video I can do the necessary editing, audio settings, timing, etc. Instead, when you drag in the timeline, the entire video is contained in a cell. Two questions: how to drag the video in the timeline so that it lasts, without doing it section by section by section, and how I can extend it the video of that one cell that contains the 30 minute video. Really appreciated any answer. Thank you

  The cursor to the left of 'Settings' control the time scale of the timeline.  Move to the right to extend the clip:

  

  A cell (thumbnail) actually contains the entire video.  You will get more when you expand the timescale.

  Geoff.

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

• How can I delete several clips at once from the timeline

  How can I delete several clips at once from the timeline?

  Thanks, Dan

  Shift-click or command-click to select if they are contiguous. Then press the delete key.

  Or select them and use the keyboard shortcut command + X.

  Or select them in the Index of the Timeline and use the key DELETE or command + X.

  Russ

• How can I drag multiple clips or an entire collection of clips in the timeline in Windows Movie Maker XP?

  I have 31 000 clips in the timeline panel. Forever, it will take to move individually!

  I don't know what else to tell you...

  There is an active forum of Movie Maker to the following
  link... maybe you could find some useful info here:

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx

• My video clips become unreadable once inserted into the timeline.

  Hello! I have problems with Windows Movie Maker 2.1.

  I am doing a video review and I've set up titles, narration and audio with great success, but when it came to insert video clips I hit a problem.  The clips are all perfectly clear and readable when seen separately in Windows Media Player or Windows Movie Maker Preview Panel like separate imported clips.

  However, as soon as I put on the timeline of the movie they will completely blurry and unreadable.  Video clips have been made using FRAPS, are saved in. AVI format, and Windows Movie Maker are Bit Rate: 1411 kbps; Size: 1.14 GB; Width: 1280; Size: 1024; Bit rate: ; Frame rate: 30 fps

  I tried fiddling with the properties of the video and the Compatibility tab settings, but nothing seems to make no difference to the quality of the final result.  It seems that the script of the film can be reduce the 1280 x 1024 resolution to something like 640 x 514, but it doesn't seem to be a way to confirm or change.

  Yes, the display resolution is reduced when we look at
  the script/Storyboard... (especially noticeable when
  view full screen)... This should not affect your filled
  project.

  Might be interesting to try to do a test and save the file in the
  WMV or DV - AVI format movie to see if the result is
  Acceptable.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  If you have problems during registration, there may be a format
  compatibility issue... you will need to convert your AVI clips
  before you import into Movie Maker WMV format.