Re: Tecra A8 PTA83: WLan loses connection

Similar Questions

• Done Tecra A8 PTA83E support 5.1 system speakers & how to connect it

  I have Tecra A8 PTA83E lap top model. (Serial No.: X6100725H)
  When I check my audio system in the Control Panel, it is show the types of outputs for 5.1 suround sytem, even some more up to 7...

  I bought a 5.1 speaker system, now I want to connect with the laptop.
  It has two input pins normal for speakers and input microphone.

  When I check the laptop, it has two plugs for the audio output and others for the mic input.

  Could you please tell me this laptop will support, if so, where the decision-making support or what I by an adapter that allows two taken from a jack (laptop audio output)?

  Thanks in advance,
  Karine

  As far as I know this will work with a digital output only sound. At your Tecra this optical port? I don t think so. I know that Toshiba multimedia notebooks have a.
  So I think that you cannot connect to 5.1 surround sound directly on your Tecra.

  Sound in the Panel options are standard options of Vista.

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• the magic mouse 2 loses connection

  My magic mouse 2 is loaded (88%) and connected via bluetooth to my macbook pro (late 2011, OS X El Capitan 10.11.4).) Sometimes it loses connection and after a short time reconnects, what should I do for him have always connected, I mean without capricious disconnections?

  Hello heide1,

  Thank you for using communities Support from Apple!

  I understand that your Magic Mouse 2 going through temporary disconnects and stops responding intermittently. We know that situations of this kind can be frustrating, but we are here to help.

  To begin troubleshooting, I suggest to read and work through the steps in the following article.

  Your mouse or your keyboard intermittently not responding

  Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

  Click or press a key

  • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

  Search for interference of signals

  • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
  • Keep devices wireless to 10 meters (30 feet) of your Mac.
  • Avoid putting metal objects between your wireless device and your Mac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  See you soon!

• Tecra A8 PTA83A - Vista 32 bit drivers needed

  Hello

  I'll try to find the drivers (Vista 32 bit) for this computer laptop pta83a - 04g 012.

  However, I can not even find the laptop on the Australian site. In fact I can't find anywhere what "A8" laptops at all.

  http://www.MyToshiba.com.au/support/download

  Can someone help me please.

  I also checked some other sites Toshiba from different countries without result.

  I wish there was an option to check through all countries, at the same time.

  Kind regards
  Paul

  Hmm... I'm not sure why this Tecra series is not listed on the page of the Australian driver Toshiba but same model Tecra A8E PTA83 is released in Europe also.

  

  You can download and use the drivers for your laptop that appear on the page of the European driver Toshiba
  http://www.Toshiba.EU/innovation/Dow...jsp?service=EU

  The drivers are fully compatible

• Tecra A8 PTA83E - only 3.3 GB recognized by 64-bit systems

  Hello

  I have a Toshiba Tecra A8 PTA83E, recently, I inserted 2x2gb DDR2 PC6400 (800 Mhz), my laptop supports only PC5300 (667 Mhz), memory works well, but under ubuntu (x 64) I see only 3, 2 GB, WIN 7 (x 64) and in memtest 3, 3 GB. Why this behavior? Is because the modules of memory has a greater frequency than those who support the laptop? If I insert a memory module(2GB) at a time I see 1, 9 GB. Thank you.

  Hello

  I guess that the other part of the main memory is shared by the graphics chip.
  What value memory appears in the BIOS?

  If the 4 GB are indicated, then everything should be OK.

• Tecra A8 PTA83E - installation of package of added value

  Tosiba Tecra A8 PTA83E
  Microsoft Windows Vista Ultimate X 64

  I was unable to install the Toshiba Value added package (vap-vista-1011btn-en) or any version before it. I talked to technical support Tosh for many times and they always promise of customer support will respond to the request, they never do.

  Towards the end of the installation, start the process of "Computational space needs" an error dialog box that contains "ID_ERR_NOTINSTALLVALZ_MESSAGE". The only option available is 'ok' and when this field is selected the installation rolls back and the finishing screen says "The wizard was interrupted before that TOSHIBA Value Added Package can be installed completely".

  I'm, I'm sure you understand, VERY frustrated by this problem. I bought (the very expensive) Vista Ultimate as Toshiba, claim that this laptop is Vista ready and it is quite possible, but the drivers and software provided are not. I also have problems with:

  Bluetooth
  Free config utility
  WinBIOS updater
  Audio driver
  Graphics driver

  I will record these problems from another thread I want to deal with these problems one at a time.

  Thanks in advance for any help being given/offered.

  Hello

  You run the 64-bit version of Vista?

  I m not very surprised that you are not able to install the Package Toshiba Vista added value.
  All the drivers, tools, and utilities are designed for the 32-bit version of Vista!

  To my knowledge the drivers 32 bit don t run on Vista 64-bit operating system!

  Regarding the error ID NOTINSTALLVALZ ERR MESSAGE.
  It seems that the BIOS update could solve this problem.

  This was reported in different threads here in the Toshiba forum!

  For example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256
  or
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21232&MessageID=78197

  Greetings

• Install the network and specific peripheral controller on Tecra A8 PTA83E

  Hello

  I have to install windows XP on Tecra A8 PT83E. Everything work fine except 2 devices. Indeed, in Device Manager, I can not install network controller and a device specific. Where can I find the two driver or which driver to install? All other devices are installed.

  Thanks for your help.
  Isabelle

  Hello

  I wonder why you are not able to install the LAN driver and why an additional device appears as an unknown device in Device Manager?  :|

  I ve checked the page pilot European Toshiba and found everything to install the drivers successfully on the Tecra A8 PTA83 series...!

  All the XP drivers are available.
  I presume that check you didn t txt file of installation instructions that was placed on the driver page! Am I wrong?

  Please check this document! You must download and install all drivers and tools specified in the right order!
  The proper installation order is important!

  I think that if you follow the guidelines everything works as it should!

  Concerning

• WiFi loses connection intermittently and the erasure of the arp arranges

  This has been asked before many times, but none of the above worked for me so far.

  I have a MacBook Pro with El Capitan on it. From time to time, usually 5 to 10 minutes,

  my connection drops and I can browse the internet. As:

  4 bytes of 8.8.8.8: icmp_seq = 7646 ttl = 53 time = 13,091 ms

  64 bytes of 8.8.8.8: icmp_seq = 7647 ttl = 53 time = 17,035 ms

  64 bytes of 8.8.8.8: icmp_seq = 7648 ttl = 53 time = ms 13,716

  Request timeout for icmp_seq 7649

  Request timeout for icmp_seq 7650

  Request timeout for icmp_seq 7651

  Request timeout for icmp_seq 7652

  Request timeout for icmp_seq 7653

  Request timeout for icmp_seq 7654

  Shooting, then turn on the WiFi will fix the problem, but I tried to limit the problem

  and I discovered that deleting IP of the route in the arp table will also fix connectivity

  immediately:

  $ sudo arp d 192.168.0.1

  Request timeout for icmp_seq 7718

  Request timeout for icmp_seq 7719

  Request timeout for icmp_seq 7720

  64 bytes of 8.8.8.8: icmp_seq = 7721 ttl = 53 time = 10,947 ms

  64 bytes of 8.8.8.8: icmp_seq = 7722 ttl = time 53 = 11,966 ms

  64 bytes of 8.8.8.8: icmp_seq = 7723 ttl = 53 time = 12,576 ms

  64 bytes of 8.8.8.8: icmp_seq = 7724 ttl = time 53 = 11,058 ms

  64 bytes of 8.8.8.8: icmp_seq = 7725 ttl = 53 time = 15,173 ms

  Deactivation of unicast arp has NO had no effect either:

  $ sudo sysctl-w net.link.ether.inet.arp_unicast_lim = 0

  Notes:

  -J' have two MacBook Pro at home. Other works without problem.

  -My phone and other devices work also with the same router with no problems.

  -The problematic MacBook works with other WiFi networks without any problem.

  What could be the problem?

  Yes, clear arp fix it. Very familiar with it.

  I had this problem for 2 years and more than 2 or 3 MacBooks, on El Capitan, Yosemite, and Mavericks.   I Googled it every 1-2 years months.  I captured packets and tested several access points... The best fix so far... is the arp compensation, and I have the automated at the moment:

  in a terminal:

  While true; make sudo arp - da; sleep 2; fact

  When the window is open, every 2 seconds, my arp table gets undervalued... and if I lose connectivity, the maximum cut is 1 to 2 seconds.

  I noticed that in some places, I don't have the problem... its as if my laptop reacts badly to some other customers on the same WIFI network.  This question makes me crazy, and I can't imagine how was such years.  If I don't fix it manually, I find myself for 30-120 seconds every few minutes.

• Added value package new updated day on Tecra A8 - PTA83E

  Hello

  I searched the site of updated drivers from Toshiba here and I found the update of the package of value added on Tecra A8 PTA83E on Windows Vista Business 32 bit and the name of the files that I downloaded from this site for this added value Package is: vap - 20080108130751.zip, but the problem is the content of this file is not for Tecra A8 PTA83 update! Is PTA82?

  How can I get the update of this value-added package for Tecra A8 PTA83 for Vista Business 32 bit?

  Please I need it so much... :(

  Hello

  As far as I know, there is no difference and this PPV can be used on both models. Have you tried to install it?

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• WRT54gl loses connection only on line channel

  Hello

  I met the wierdest problem.

  My PC loses the connection with my WRT54GL router and in this case the only thing that brings the back of connection is made power cord from the router and then by him plugging.

  When the PC loses connectivity to the router all other computers in the House connected by a wireless connection stay tuned! Only the PC connected by LINE loses connectivity. Restart the modem or PC does not help. Even clicking on the RESET button of the router does not help.

  I am running Windows XP, the router is set to STAY ALIVE, I can connect to the router admin and see the IP but can not use the internet.

  Does anyone have any idea why this happens?

  Thank you

  O.

  On your computer, turn off the firewall and Antivirus and then check if you are able to go online or not. If still no then on your computer, open the command prompt window and type 'ping 208.67.222.222' and press on enter and check whether you have found all the answers, if so, you can assign a static DNS address for your computer.

  On your, click Start - Control Panel - network - computer connection, right click on wireless network connection and click Properties and then select "TCP/IP Internet Protocol" and click on properties and below to select the option "use the following syntax address DNS server" and in favorite type of DNS: 208.67.222.222 and auxiliary DNS: 208.67.220.220 and click OK...

  Once done, you can restart your computer and check if you are online.

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.