The Pavilion elite m96xx fan speed

Similar Questions

• What to put in the Pavilion Elite m9280.sc - RAM has? CL? MHz?

  I have a Pavilion Elite m9280.sc - has.

  I want to improve/replace the RAM.

  HPs Web site say 800 MHz max, Crucial guarantees 1066 MHz max will work on it. (http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=C2A628C3A5CA7304) So, who is?

  I would also like to know on CL. What is best CL4 CL5 CL6 or CL7? And which of them will run on my computer?

  And I am not mistaken in asuming 1.8V?

  CL5 worked well.

• Pavilion 15 ab034tx: fan speed does not synchronize with the temperature of the cpu all in game.

  Although playing high graphic games CPU overheats and the game stops working after 5 minutes of play. So please make changes to bios fan settings.

  Hi @abhishekkm,

  Welcome to the HP Forums!

  In your post, you said that currently your HP Pavilion Notebook 15-ab034tx is overheating. You can restore the BIOS by default, as this has helped other people with this problem. Here is a document that will show you how to proceed.

  Please let me know.

  If you want to say thanks for my efforts to help, click on the thumb to to give me a Kudos.

  Thank you.

• HP pavilion e016tx 15: fan speeds up and flashing capslock

  Hello Sir,

  I have a 22 month old hp pavilion 15 laptop e016tx. Since past 2-3 months it fan accelerates really, and to stop it I usually lift and change position lappy and most of the time it works. now sometimes when Fan also accelerates capslock begansto flash and stop after a while. can you tell me what is the issue with my laptop and how it will get.

  Hi @jaswinderjassi,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-e016tx and problems with the fan. With overheating , you might want to check fans for dust and debris.

  I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way it will look on the hardware installed on the laptop and reset the default values of the fans.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• The Pavilion Elite HPE475 need an external antenna to a wireless connection?

  I just bought this machine and have had problems with a poor quality since the wireless signal. HP technical team came up with all sorts of different explanations, and I even had to send for the "repair" because one of them think that the wireless card was defective. The last time it's because he needs an antenna.

  Can someone confirm if this machine wireless card requires an antenna to be connected to the two screws Golden at the back of the computer? What is the answer, or just another diversion?

  I was not sent an antenna with the computer, it may be a mistake the part of HP. I can connect to the internet, but usually get that two bars on the signal, while my old computer has always had five bars, as do other computers on the network. The connection keeps dropping out and is extremely slow to load at times.

  Any help would be appreciated.

  Hello

  I suggest that you take a look at what came in the box.

  The low-profile wireless network card should have with an antenna and two cables with connectors from red and blue to differentiate the connection to the wireless card.

  The service center may be assuming that you already know that... All the wireless cards that come with desktop computers have a connected external antenna with cable to the wireless card.

  This image is an example. Some cards equipped with antennas that screw directly on the gold screws. Most 802.11 b/g/n card look like this.

  Please report anything that is on the label with bar code on the back of your PC, except the serial number. The HPE475 is not a complete description of a PC.

  Best regards
  ERICO

• HP Pavilion Elite e9120f homemade my hotter than the Sun (first tl; dr material)

  Well Yes, I'm baaaaack with another question regarding the Pavilion Elite e9120f.

  This problem doesn't become apparent only a few weeks ago, when the outside temperature decided to jump the 20 degrees or more.

  My CPU runs very hot and I'm very worried.

  A nice cool day like today its IDLE at 56 degrees Celsius. On a hot day its 58-61 Celsius.

  It sucks for me because I do very high definition youtube videos and fitness puts them all 4 cores of default of the e9120f CPU, the AMD Phenom II X 4 910 dependents from 98 to 100 percent (in turn calls the temp to never bet greater than 65 degrees, during which the cpu fan goes supersayan and makes the room vibrates with the sound of a Jet engine that is not much, only keep the temperature constant, it don't cool does not desperately).

  First: get a temporary monitoring program that works with this terribly designed motherboard is hard; SpeedFan, cpu - z, nothing works except Core Temp v0.99.6 that works very well. (It is worth mentioning that the bios of the motherboard comes with does not any overclocking of any kind, whatsoever, and if you mention same fan control it is falling apart.)

  I found a number of things:

  The fan on the top of the radiator may be upside

  There is very little air flow in the case

  There is no empty fan on the motherboard connector (photo, page layout sketch)

  So I need to ask some questions to the base time down to a reasonable temperature.

  So:

  The CPU on the top of the radiator fan. It is supposed to blow air down on the radiator or suck air through it? (Blow into the case or suck case, blowing on the radiator).

  IF, for example, the seal of filth gray (sorry for the noob, I don't know what this kind of things question) which normally resides between the radiator and the processor itself was broken somehow, that would be the problem? (I had to remove so that I could lift several tons of dust in the trash, he was released and seems to work fine for a while until now).

  If the gray dirt is the cause, how do I fix/replace it?

  If it's not and it turns out that I need a new cpu fan/radiator, I could get suggestions for under $ 80?

  And would work this configuration:

  fan case normal cover, connected to a plug. Corsair H-50 attached to the CPU, using Connector CPU fan for the pump (pump uses a 3-pin cpu fan connector, which is what uses the mother Violet3 in the e9120f), change the case so the fan and radiator are attached to the area of practice 120 mm perforated on the case, and this is where is Gets a bit tricky : using a spare molex 4pin to PSU and converter who is actually making a 3Pin fan and this connector 3 connector case pin case fan, use another converter (I've SEEN ONE but I can't find the link more) convert the fan 3 pins to a contraption of connector 4pin case fan. I also ask if there is an easier way to put it in place but I can't find anything that converts a molex 4-pin PSU to this type of plug:

  

  I appreciate for any help. This pocket of plasma burning in my cpu MUST END NOW! LOL tl; Dr

  It should not be too much a problem with a 3 pin to 4 pin Just make you line insertion slots.

  Optionally, you could add as a case fan or change the power supply. HP power supplies have very small fans and the area of total air flow (grid holes) is also low.

  Thermal paste is gray grime. You need more than a slim gain of dab of thermal paste rice spread.  Insofar the processor coolers to go, you will need to do some measure the width and the height.  The Corsair and Thermaltake make a lot of CPU coolers.

• Satellite U500 - 11G - noise of the fan speed after BIOS update

  Hello

  I have the Toshiba Satellite U500 - 11G.
  I've recently updated the BIOS because my CPU fan did not work under Ubuntu,
  But after the update, my CPU fan speed is faster then normal and make a lot of noise (even if the CPU is cool) when I use Windows 7 is still stay on fast speed making a lot of noise.

  Do we sort of degrading the BIOS or thw way to earn the slow CPU fan speed?

  Concerning
  Sagar

  Update BIOS because of Linux? You know that Linux is not possible on this laptop model?

  In any case, to reduce the fan sped Please reduce the cooling in saving settings method.
  Control Panel > Power Options > go to your preferred power plan settings and choose advanced power options > Toshiba saving settings > cooling method > set to optimized battery.

• Differential of 10 ° C between core 3 and other core Q8200 to HP Pavilion Elite m9525f?

  I bought a HP Pavilion Elite m9525f last weekend and noticed that this core 3 was running hot in comparison to the other three cores of the processor Q8200. It was according to program SIW that I downloaded on the internet. Core 3 still works more than the rest of about 10 degrees C. Is this normal? Readings were found with side panel of the case off the computer. Basic 3-51 and the closest possible other core (Core 0) at 41 C.

  Is the CPU and case fan speeds set? They seem to stay at approximately 1080 RPM (program only used SpeedFan to read RPM) even when I have the Power Options program in Control Panel the value high performance.

  Incidentally, I found the main video card bios setting to the PCI instead of PCIe x 16.

  Thermal sensors can be "significantly" at low load.  Run the latest version of Prime95 to load all four cores and real time allows to check the base temperature.  Drivers should be ± 3 C.  The CPU is soldered to the heat-spreader, so there is not much you could do to equalize the delta T.  The lower range and E7xxx processors use plain thermal paste instead of welding of low temperature to improve the transfer of heat to the heat-spreader.

  The processor fan should ramp upward after 1 min of Prime95.

• Do I have reason to infer that I can't get two monitors running on my HP Pavilion Elite HPE - 410 t?

  I got the Pavilion Elite HPE - 410 t with the included nVidia GeForce 315 graphics card and tried to get two monitors put in place. I have two VGA screens and I run one of them off the coast of DVI using a VGA port to DVI, and it works fine. However, I can not all signals from the built-in VGA port, so I started to look around the site of HP. I came across a page that lists the motherboard Plug and he shouted that the embedded video is not available if a graphics card is installed.

  Thus, it seems that I am out of luck, but I just wanted to see if anyone could tell me if it is maybe something obvious that I'm missing. My nVidia monitors also has an HDMI port, but I understand that I would need a HDMI monitor to be able to use this port.

  Can someone let me know if I'm wrong in my understanding of my options, or if there is an easy solution?

  Thank you.

  Hello

  Yes, you are right to assume that if you have a video card installed, the integrated graphics chip is disabled.  Looking at the specifications of your card (see link below), he suggests that it has a VGA, DVI and HDMI connection.  However, I realize that these specifications vary and may not apply to the card that you have.

  NVIDIA GeForce 315

  If yours doesn't have the VGA adapter, then your also had reason to assume need you a monitor with an entry in order to use 2 monitors HDMI.

  Kind regards

  DP - K

• Upgading A Pavilion Elite HPE hard drive

  First off let me thank the guy who responds to this advance. It may be a few days before I have the chance again. Sometimes the unknown Warrior keyboard deserves a bit more then they get lol. So, thank you.

  I have a HP Pavilion Elite HPE. I just took my first slap to upgrade certain hardware and now I have a FEVER. I should have noted some things while I was there, but I was a little excited to get it working again. I noticed a few differences in my template to the list for the Pavilion Elite HPE, I found this site, but I should be able to answer your questions with a quick glance to see if it's right. HP presents my motherboard as "MS-7613 (lona-GL8E)" but I'm sure that my Board is a Foxconn version 1.01 Aloe with a 3.0 GHz AMD Phenom II x 4 processor.

  Then. Here's my question, can I put my 1 TB harddrive to two 2 TB drives? And you have any recommendations on which hard drive I use? I'm new at this and so I don't know I might miss information on this for you, but I think I can answer your questions on hard/software that I use.

  Thanks, Escar Frazzle.

  Pavilion Elite HPE (HPE-210y), AMD Phenom II x 4 3.0 GHz, 4 X 2 8 GB RAM, GeForce graphics 970, win 10

  You are welcome.

  First of all, here are the Product Specifications for the computer.  They show that the motherboard is made by Foxcom.

  The berries of units that are available are:

  Computer case

  

• Pavilion Elite m9340f: m9340f windows version upgrade from Vista 64

  I bought the Pavilion Elite m9340f in 2008, and the computer continues to work very well with the originally installed Vista 64-bit.

  I get notifications that both IE-9 that Google-Chrome 48.0.2564.103 m are no longer in charge and not working properly with many Web sites.

  I see a lot of people on the forums of the historical problems with Windows 7, 8 and 10 updates on the m9340f.  The HP support site clearly states that the m9340f has not been tested with Windows 8, and I don't see anything about HP confirming the test he m9340f with Windows 7 or 10.

  I am very careful about the updates of Windows does not properly with the hardware configuration of m9340f.  Can someone please give me some advice on the modernization of this machine for a version of windows that will allow me to have the features Google Chrome and IE, but will not do something elese to become non-functional.

  Thanks in advance,

  dberberick

  dberberick,

  The main reason I don't like the upgrade, is that the problems you had with the previous operating system tend to make their way in the new OS. You also have the previous residual files, which can cause problems.

  (1) what would be the result?

  If you haven't experienced or unfamiliar problems with Windows Vista, the upgrade to Windows 7 should be simple and without problems during migration.

  (2) what version of Windows 7?

  Unless you need functions of class Affairs (unique encryption, join a domain, etc.), it is not really a necessity for professionals.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Replacement for HP Pavilion Elite e9250t HARD drive

  I get an error message saying "A disk in a RAID 0 volume is a failure".

  I plan to replace both drives, currently, to 500 discs with a capacity higher than as 2 TB each. The Pavilion Elite e9250t supports 2 TB disks? And can I install them with RAID, so that my data is protected?

  Hello JMHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have questions about your desktop PC HP Pavilion Elite e9250t supports 2 TB disks and whether or not it supports RAID. According to HP Pavilion Elite e9250t desktop PC product specifications and configurable Options , your computer supports "2 TB (2 x 1 TB) 7200 RPM SATA 3 G (3.0 Gb/s) ' so the answer to your first question is 'YES', it will support a 2 TB hard. As to your second question as to if she supports RAID, indio motherboard (which is what you have) supports the following:

  • Integrated RAID controller: P55 (same as previously introduced application ICH9r RAID)
  • Steps to configure RAID (internal link to setup for P55, even the steps of configuration for ICH10r and ICH9r)
  • Intel RAID solution is called Intel Matrix Storage Technology (outside link)
  • Only some models indio compatible ship RAID (see datasheet for your model). Compatible RAID means that the system is ready to be configured for RAID 0 or RAID 1.
  • Migration from 1 to 0 is supported by material in the world.
  • RAID modes supported *:
    • RAID 0
    • RAID 1
  • Additional resources:
    • Overview of RAID
    • Intel Matrix storage technology (outside link)

  * NOTE: three hard disks requires a RAID 5 and RAID 10 four hard drives. While the hardware can support other RAID modes, only RAID 0 and RAID 1 modes are supported on models that include this motherboard.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• TV tuner card - Pavilion Elite HPE-495uk

  Using the Pavilion Elite HPE-495uk, which has the TV tuner MPEG 4 card, I will be able to display TV programs using an 'ordinary' coaxial cable or signal has to be fed through a decoder "TNT"?

  The card supplied with your computer TV tuner is able to receive analog TV signals and digital, you can connect the TV cable directly to the TV tuner card. You can also check this article.

• Better graphics for HP Pavilion Elite HPE-570f card

  I have the Pavilion Elite HPE-570f (BV542AA) Windows 7 ultimate with 16 GB of ram upgraded and an upgrade

  HARD drive with 7200 RPM. The P/S is a 460w and ATI Radeon HD 6770 with only 1Gig vram. I would like to upgrade the video card up without compermizing the P/S.

  Does anyone have any ideas.

  Thanx.

  Hello

  The NVIDIA GTX 550TI would be a nice bump in performance.

  The NVIDIA GTX 550 TI compared to the Radeon 6770.

• IEEE 1394 and Pavilion Elite

  This is my first post.  I will soon buy a new pc, and reflected on the Pavilion Elite series.  I'm set to zero on the e9120t.  No where on the HP site doesn't specifically list if this model has or does not have an IEEE 1394 port.  No one knows for sure.  It is an option that I have.

  BTW - I tried the "chat with a sales consultant" option and it seems that the person is simply went for the same site, I was, replied that he had not this port and then give me a sales pitch on warranty, price, customer satisfaction, performance, etc.  There is no really inpsire self-confidence about the knowledge of the person.

  Thanks for your help

  OK, this motherboard has no 1394, sorry.

  See you soon,.