The performance of the host CPU / use

Similar Questions

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  Please let us know your operating system.

  Concerning

  Megha Rawat

• Unable to communicate with the host computer using the network University compactRIO

  Please move this topic to the appropriate section if it is not the right section. I can't locate a Council called the compactRIO. Thank you very much.

  I encounter this problem of network communication with my cRIO 9067. the linklocal or USB connection is fine but not static IP connection on the network. I contacted the it Department to assign me a static IP address for my MAC address of cRIO. In our University, they block only unknown MAC address access and the cRIO is in the whitelist. Here are the details

  cRIO attributed to IP address: 129.12.54.xxx, tried both netmask 255.255.255.0 and 255.255.0.0, no luck

  the host computer's static IP address: 129.12.50.xxx, subnet mask 255.255.255.0 (information of cmd - ipconfig)

  First question would be: they are on the same subnet? I need to make sure that even if scientists confirm that.

  Secondly, I followed https://www.ni.com/getting-started/set-up-hardware/compactrio/static-ip by using the IP address assigned, but not luck. I've noticed that I configure same address type cRIO static IPv4 using the USB connection or for local link mode, she went in DHCP mode or Local link once I unplug the USB and restart it.

  Whenever I restart MAX, connect the cRIO and my host to Ethernet jack on the wall, it shows the DHCP mode or link with assigned Local 129.12.54.xxx IP and the subnet mask 255.255.255.248. In addition, I am not able to change it in a drop-down list even after removing it and restart MAX indicated by tutorials OR.

  If you need more information, please let me know.

  Help, please!

  Jinyu

  Dear Mikko,

  I am pleased to tell you that the problem has been resolved. The cRIO works very well.

  The reason why it does not work is in first place because they are in the other subnet. For my school, my host is 12x.1x.54.130 and the IP assigned to my cRIO is 12x.1x.54.131. the subnet mask is 255.255.255.0 number marked in red must be the same for the cRIO is connected correctly.

  Kind regards

  Jinyu

• Maximum in the core CPU used by db since it is started.

  
  I want to know what is the maxmium CPU cores used by the database as it is started.

  If the server has 16 cores. Is get it in any case what is maximum carrots used by DB since it is started by using the SQL query.

  LM * 422407 * sh wrote:

  I want to know what is the maxmium CPU cores used by the database as it is started.

  If the server has 16 cores. Is get it in any case what is maximum carrots used by DB since it is started by using the SQL query.

  Please recognize that nuclei numbers cannot and does not change once the DB has been started.

• Cannot add the host by using the command Add-vmhost pcli

  Hi all

  I'm unable to add esx host in the cluster and fetting an error that authenticity of hospitality «»

  SSL certificate is not verified. "even if after giving the parameter - force.
  Below is the command I use and the error I get
  : > Add-vmhost-name xxxx.xxxx.com - force - location clus
  error: dd-VMHost: 21/01/2013-17:49:30 Add-VMHost authenticity of hospitality
  SSL certificate is not verified.

  Please suggest.

  What PowerCLI version do you use?

  Make one

  Get-PowerCLIVersion

  If this isn't the case, 5.1, can upgrade you to access this setting?

• Identify the best CPU using multiple queries on the database environment

  Hello
  
  We live high CPU on one of our development servers (AIX 6/11 GR 2). It has several databases and we need check the queries that are causing hiking of the cpu.
  
  So, how can we specific database queries and it is when there are multiple databases?
  
  I could use nmon to get the process, $ query session v and v $, v$ sqlarea, if there is only one.
  
  Thank you!

  Hello

  There will be no direct approach (check if GRID allows to control/OEM), AWR and STATSPACK review should be best approach once and for all the DB to fix permanently, if not then...

  Identify top/topas/nmon top or 10 os process ID's, although they features will look like unless the owner is different.

  Return to the command prompt using ps - ef

  ajay@cts-db-vashi#ps -ef| egrep -i "8716444|7471138|12451978"
  oracle9i  8716444        1   0   Dec 14      - 291:51 ora_dia0_CTS
  oracle9i 12451978        1   0   Dec 14      - 62:50 ora_vktm_TBMS
   
  

  If you don't want to use top/topas/nmon use below with appropriate sort to get high cpu/memory process & pass it to v$ for more details in sqlplus

  /usr/bin/ps aux |/usr/bin/sort -nrk 3,3 | egrep -iv "root" | head -10
  

  Thank you
  Ajay more
  http://www.moreajays.com

• Unable to connect to the host PuTTY using!

  Hello people.

  I try to use puTTY to connect to the host, but I can't. Message says - Network error: Connection refused. Any help.

  Thank you.

  In terms of virtualization, there is no real difference but how you interact with directly it is - the console, usually called the Service Console is part of ESX. It is essentially a virtual machine running RHEL which is used to manage and control your ESX Server.  Being based on linux is to SSH ocnnections research and this is what you connect to use a like of the PuTTY SSH client. In ESXi management and control functionality is part of the vmkernel which is the o/s of the ESXi server. It is no longer use RHEL so there is no capability of SSH connection so PuTTY will not work.  VMware has replaced the Service Console with remote CLI - which gives you the functionality of the Service Console.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• The host CPU is not able to run 64-bit virtual machines

  I am running VMWare Server Console on a Windows 2003 64 bit OS 1.0.3 and prepare to create a 64-bit VM server to test a new application on.  This forum server works on is a SuperMicro SuperServer 6025 B - TR +.  I entered the bios and activated the virtual bios in the CPU settings.  However, when I start my VM, I get the following error:

  «You have configured the virtual machine as an operationg system 64-bit client.»  However, this host processor is not able to run 64-bit virtual machines or this virtual machine has 64-bit support disabled.

  I looked online and saw some references to allow an EM64T which was to be activated but I do not see this option in my BIOS.  Someone at - it any other suggestions as to what I have to do to get the virtual machine to use the 64-bit compatibility.

  Unfortunately, the 1.x server logs are a little sparse in this regard.  However, it seems that you have mixed steppings of physical processors.  In this range of models, Intel changed the VMCS review between the Bx steppings and Gx steppings ID, making it incompatible for the execution of VT - x.  Realizing their mistake, Intel has provided to OEMS for a microcode patch that makes the revision ID the Gx stepping VMCS matches that of the Bx stepping.  OEMs distribute this patch of microcode as a BIOS update.

  In short, an update of the BIOS of your system provider should solve the problem.

• How to know the host name using IP SCAN

  Hello

  It is possible to know the hostname from / IP address using the IP configured SCAN?

  Please do not give me the links for - what is SCAN IP and how it works... Please

  Just trying to find out whether it is possible or not.

  Thanks in advance.

  Kind regards

  Mukesh

  Hello

  > Is it possible to know the hostname from / IP address using the IP configured SCAN

  What hostname... database hostname name clustered...? If so you can not, because the IP SCAN is not assigned to any host, SCAN name is defined in DNS that resolves the 3 IPs in the method of Robin, hope this clarified your question.

• Should have 8 000 emails in my Inbox Windows Mail (Vista) considerably slow down my computer with 3 GB of RAM and trigger alerts from Norton of "the High CPU use by Windows Mail.

  In addition, about half of my 8,000 e-mails are unread. Thus, the fact of having 4 000 unread emails in my mailbox Windows (Vista) slow down my computer more than if they were 4 000 read emails?

  If so, is there a quick way to mark all read emails as read in Windows Mail (Vista)?      .. .in windows Live Mail (Vista)?

  Even if these unread e-mails degrade the speed, is there a quick way to mark all read emails as read in Windows Mail (Vista)?... .in windows Live Mail (Vista)?

  I also regularly get an alert Norton of 'Use of disc high by Microsoft Windows Search Indexer.'  Gravity is the next, and what can I do to fix the problem?

  Finally, I have a lot of folders: would have 2,000 emails in the Inbox Windows (Vista) slow down a computer more than if 2 000 mails were one or more files?   This change of response if the e-mail is unread vs bed?

  #2: the Inbox is accessible by your computer whenever he asks new messages. The fact of having 1,000 messages in the Inbox slow it down? I have no personal experience, since I never have more than a dozen or messages in my Inbox, but it is so likely. If you have lots of free space on the hard disk, the messages would be better in another folder (s). Even if you create more WinMail's local folders and move messages to them.

  I would also say this. Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  It can be very useful, and it can't hurt anything.

• guest computer must have access to the printer host cannot use

  I have a new Mac, an old Mac, an old Windows machine and printer of Xante AW1200.

  Almost all of my work is done on the new Mac.  I get the old machine Mac or Windows of the drawer on rare occasions, or when I need to print something, because the new Mac cannot use the printer.  (Xante never taken the trouble to develop an OS X 10.6.4 driver for this printer.)

  I would like to get rid of the Windows machine.  I have it successfully migrated to a machine of comments on the new Mac, using vmware Fusion 3.1.3 but I have not found a way to get the computer to see the printer.

  This isn't a complete surprise, as Xante does not provide a driver for their (former) printer and (my new host) operating system OS X 10.6.4 - but they were planning a WIndows XP driver that has always worked well on the Windows machine, connected by the RS232 port.

  The printer also works very well on my old Mac, connected via ethernet.

  Can I connect the printer to the new Mac's ethernet port.  Of course, the Mac cannot work with it.  But could the guest computer use Windows sound driver to manage the printer?

  None of the four standard ways of printing seem applicable: ThinPrint because the host cannot use the printer.  USB because the printer is not a USB connector.  network / wireless because I do not have my old Mac running all the time.  Hello because I think that it requires that the host can see the printer.

  It certainly isn't a frequently asked Question.  Sorry, my situation is so unusual.  But the printer is special enough for the work that I do.  Any tips?

  Thank you.

  If you have a router on your site then you should be able to connect the printer to the router, configure it as needed, and then accessing it in the comments as a network printer.  Note: The guest network should be configured as connected by a bridge to access in this way.

  Another option of network which is doable, but a little more difficult to set up, is to fix the printer directly on the Mac with a standard CAT5 Ethernet cable, not a Crossover as suggested in the Ethernet Port of Mac being automatic detection User Guide.  You would then manually configure the IP address, etc. on the printer and network bridged on the comments and even if Bridged his only access to the printer on this network adapter.  Then use a second network in the guest configured as NAT, if you do not also use Bridged on that, to enable the client to have access to other resources on the physical LAN to the host, such as Internet access, etc..

• calculate the CPU used for awhile...

  Hi all
  
  Statpack/AWR report for like 6 hours. How can indicate the % of CPU used for this moment? As we do some planing ability and we need to know how much CPU our instance serve? Thus, when we give the final number of management... .to tell them if 4 CPUS or 8 processors etc etc are good or not... Thank you

  Don't you see a 'CPU time' in the 'Top 5 Timed events' in the AWR report? If this isn't in the Top 5, you would always see in "statistical model time."

  In addition, statistical CPU OS are in 'the operating system statistics '.

• The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode.

  Hello everyone

  Here's the situation...

  I have:

  vSphere 5.1 Cluster with two 5.1 ESXi hosts and configuration VSA.

  vCenter Server running on a virtual Windows Server 2012 machine.

  Task: Transfer virtual vCenter to a physical machine.

  I have install the physical machine with Windows server 2012.

  Installed vCenter 5.5 (hosts Newer then the ESXi 5.1)

  VSA installed Manager (VSA Cluster 5.5)

  When go to VSA Manager I am introduced to the following screen...

  

  Recover DOES NOT work!

  Full move operation DOES NOT work!

  It recognizes the Cluster AUV-> check availability (is online and OK)-> begins to create the Cluster VSA and it fails with the following error...

  Move the cluster host

  VSA HA Cluster

  The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode. Under voltage or suspension of the virtual machines on the host can use the CPU features hidden by this mode.

  Could someone please help?

  Thanks to you all! This problem has been SOLVED as follows...

  • VCenter Server go to--> "C:\Program Files\VMware\Infrastructure\tomcat\webapps\VSAManager\WEB-INF\classes".
  • Open the file "dev.properties" with Notepad
  • Change the line that says "evc.config.baseline = lowest" to 'highest = evc.config.baseline' and save the file.
  • Perform the SERVICES. MSC and reboot 'VMware VirtualCenter Management Webservices'

  After that it of back in the VSA Manager and run it again 'Cluster of VSA recover'!

  Now, the wizard should be able to add hosts to the inventory, create the HA Cluster and add hosts to the HA cluster and configure Cluster HA.

  Done everything! :-)

• How to change or update the host file?

  When I installed WIn7, I created a user account that is an administrator based on user account information.

  Now, I want to change the host file but it always respond that I have to use the administrator account to save the host file.  I tried to change the security in the prosperity of the host, but it does not allow me to do.

  Appreciate someone can walk me through step by step.

  Thank you very much

  Open Notepad as administrator (right click on the Notepad shortcut and choose "Run as Administrator") then open and edit the HOST file using this instance of Notepad.  (Via the menu "open file of-->".)

  Geographical area:

  C:\windows\system32\drivers\etc\

  or

  %SystemRoot%\system32\drivers\etc\