the power on password screen comes how to take power on password screen off I'm locked up

Similar Questions

• Satellite 1005: Push the power button, will turn off the AC power.

  Laptop: Toshiba Satellite 1005

  Problem: When I press the power button and let go, the laptop immediately loses all power.

  I use the power cord plugged into the laptop, the power supply light is green, but when I press the power button and let go, as soon as the power light goes black(turns off), nothing happens.

  Howerver, if I PRESS the power button without letting go, power LED lights, but the laptop won't boot at all, no Startup logo, no sound no matter what.

  It's the second time this has happened, the first time, I let stand overnight and the next day she booted up fine.

  Currently, the laptop is cold, it did not work, but always the same thing as described above.

  There are no changes made to the laptop.

  Any ideas?

  It seems that the contact, the power button is faulty. Better to elevate the laptop to a Toshiba service station for a check.

  I n ' t´t think that it is a software failure.

  Good bye

• Dell PC randomly freezes and now require the power button to turn off

  original title: PC freezing

  My old DellPC of 11 months has started to freeze. Use the power button / stop to turn off. Once it will not re-start twice it turned off my Mcafee security.

  1. Uninstall Mcafee. Install something else like program AV from Microsoft.

  2. start in safe mode / networking. Install the Microsoft AV program, update, then scan the entire hard drive

• My computer will turn off not when I use the start menu, it is as I have not yet hit shut down. I have to press the power button to turn off.

  It happened once before and I don't remember what I had to do to fix and I can't find this post to remember.  Thank you in advance...

  Hello

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Windows stops responding during Windows XP shut down

  Advanced Troubleshooting for shutdown problems in Windows XP

  Hope the helps of information.

• My MacBook Pro with El Capitan 10.6.11 close the menu drop down. I have to turn off the power

  The closing down and options no longer work in El Capitan 10.6.11 restart on my MacBook Pro mid-2012. I have to press the power button to turn off.  When shutting down or restarting are selected, the Ribbon at the top of the screen disappears and Finder is no longer available but other aps on the bench of the accused are still available. When I restart after turning off the power, the system is back to normal until I need to close again.

  Hello

  Just in case, run disk utility.

  Open utility disk located in Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

  If disk utility indicates that the disc seems to be OK, you are finished. Otherwise, you must repair the disk.

• Pavilion: seeing the power button

  Whenever I turned off my laptop, the power light turn off every time. He died 1 in 10 times. Rest of the time it stays on and if I don't notice that all the battery is consumed.

  I have to press the power button to turn off most of the time after giving the stop option

  Dear customer,

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

• HP DV6-6B25TX turn off after 10 to 15 seconds, regardless of the power of the battery or power supply

  Hello

  MY DV6-6B25TX is cutting off after 10-15 seconds, regardless of the battery power or AC power.

  Here's the complete scenario of what happened in recent weeks:--

  Two weeks back I was using the laptop with the power adapter is plugged in for charging, the battery got charged up to 99% then it stopped charging and display the battery icon text, "plugged in, not charging".

  A return of the week, the battery was 20%, after plugging in the charger, always the same message "Plugged in, no charging current".

  Now the laptop does not meet the key power when the battery is inserted.

  If I remove the battery and back again, it starts without pushing the power button and turns off after 10 seconds, well before Windows starts.

  She stops even on the Bios screen, OS is not definitely the question.

  When I plug in charger and press the power button / stop, the same thing, i.e. starts and shutts off after 10 to 15 seconds, regardless of the BIOS or Windows startup screen.

  I removed the ram and but again, but the problem still persists.

  Also there is no issue of overheating due to dust, as I've barely used the laptop for a few hours, the phone is about 6 months and under warranty.

  Please advice ASAP.

  Thanks in advance.

  Honestly, something prevents the battery charge. Computer laptop closing seconds after that reinsert the battery is a good indication the battery just is not getting charged. This could be a battery failure, charger, port, or in rare cases of charge motherboard.

  Since it's under warranty, I recommend you contact HP support that there is no easy solution for this on the forums. It's a hardware problem.

  The number of the Canada and the United States support is 1-800-474-6836.

• Not the power of the mobile robot platform

  Hello

  I just got the Robotics Starter Kit for education and have problems at the robot to work. I plugged the power and turned all the dipswitches in the off position but the power led is still off and the hardware configuration can not detect. The power brick has confirmed that he was in charge and after leave plugged in, the battery is fully charged, so it is not because as its low power. There are wires that can broke or I have to send it back for repairs?

  Thank you

  oswong,

  Just to confirm, plug you the dough to the supply cable of the robot after charging?  If the battery is charged and connected, the power led should light up when the "MASTER" switch is turned on.  If the Council is not be powered, then it could be a bad connection or a power converter is damaged.  A power converter is damaged, you can check by listening to a small quiet click.  Let me know if it helps.

  Chris M

• How to take screenshot in Windows 7?

  I need to take a screenshot after a few seconds. My PrntScrn Key is dead. Is it possible to take screenshot without using print screen. In fact, I want to take screenshot of my desktop context menu.

  With respect,
  Thanks in advance...

  Normally, all you need to do is just press Prt SCr (Note: you will not receive any confirmation that the screenshot was taken), open an application such as Wordpad (Start Menu, all programs, accessories), then right click and paste.

  Press the Fn key
  If you find the print screen command a keyboard not working not on your laptop, you may need to use the "fn". In some laptops, you must press the Fn key, as well as the printscreen key to do the job. The Fn key is located between the control and the Windows key in the lower left corner of the key board.

  Some laptops and other mobile devices that do not have a print screen button could use other combinations of keys, such as FN + Insert, to capture the screen. Consult the manual that came with your laptop or device for specific instructions.

  If you use a control wireless keyboard on lock (locking function) key on your keyboard. Check top right of your keyboard to the F LOCK key, which can be you can use the print screen key. The CAPS LOCK key activates / deactivates the function keys. A function key is a key that has two possible commands depending on the State of the lock toggle keys.

  http://support.Microsoft.com/kb/894037
  http://support.Microsoft.com/kb/894513/en-us

  I would advise you to read all of these links:
  http://www.Buzzle.com/articles/print-screen-not-working.html
  http://www.WikiHow.com/take-a-screenshot-in-Microsoft-Windows
  http://www.intowindows.com/how-to-take-snapshot-of-start-menu-or-context-menu-using-Snipping-Tool-in-Windows-7-hidden-feature-of-Snipping-Tool/

  And, Yes, it could be that there is no "freeware available to take the screenshot with a time delay. Just use your favorite searchmachine and take a look at what is offered.

  I hope this information is useful.

  See you soon
  Julia

• How can I remove a possible hacker off my Security Center?

  It maintains close and I have to go and turn it back on, I already have ad runs and the virus runs and its still there. Help, please!

  What did you use to run virus scans?

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• Laptop HP 14 flow: flow of Hp laptop, 14, stuck to the power on password screen

  I had very low local hardrive space (300 MB) and clean disk did not work. So I did a full back to zeroit failed at 66%. Then I turned on my pc and it asked for the power on password that I entered, he went to the hp loading screen, but still asked for the power on password (for this, repeatedly). So I tried then to get into bios after the power on password and he asked my admin password, mine did not work? Please can u help me. I would really like to be able to reset and use my laptop. Could, using hard reset do the trick, if yes, how do you go on my laptop?

  Yes, but I'm not sure of the price.

• Pavilion p7-1414: how to recover the power on password

  I forgot power on password, battery removed jumper & always starts, the power on password screen appears but date eg.mm/dd/yyyy started 2011, Help!

  Hello:

  Please see the link below (clear password settings), and there is incomplete instructions to clear the BIOS password.

  http://support.HP.com/us-en/product/HP-Pavilion-P7 - 1400-computer to desktop-PC-series/5295962/model/5297007/docu...

  These are the instructions changed to clear the password... they left a few steps outside.

  To clear the password BIOS follow these steps

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• I dropped my phone from a height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken

  I dropped my iPhone 4S height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken and I can't touch I have all my studies on this subject two years ago and I still need the documents please someone help Please I need my pictures and documents

  Hello

  You must make an appointment at apple store in for breach of warranty replacement.

  You pay part of the cost of using iCloud upward when you configure new iphone.

  Even apple ID.

  See you soon

  Brian

• Bigger is better when it comes to the size of the text on my screen; How can I do then?

  Bigger is BETTER when it comes to the size of the text on my screen. How can I do then?  I use VISTA, and the instructions I have received my COMPUTER technician does not work because he tells me to locate "Display" in me the settings.  Can you help me?

  Thanks in advance.
  Mel
   
  [Moved from comments]

  Hello

  Options:

  1. click right on the desktop > customize. Select adjust font size and try the larger scale (120 DPI) or click Custom DPI and select a different percentage.

  2. click right on the desktop > personalize > display settings > resolution. Move the slider to one notch down. This will make everything on the larger screen, but you need to scroll more that you used to see everything on the screen.

  3. for Internet Explorer, use the Zoom feature on the right side of the status bar or use the key combination [Ctrl and +] and [Ctrl-] to zoom in or out.

  Don