Toshiba power saver and limited account

Similar Questions

• Re: Toshiba Power Saver and administrative rights

  I have set up another user with administrative rights but cannot access toshiba power saver to change settings.
  I have to open a session as long as the original user to change anything either.

  Help

  Hello

  As far as I know the admin can only change the settings to save energy and can assign and configure power profiles.
  The user then, else can not change. It is not possible

  Greetings

• TOSHIBA Power Saver does not work with the limited user account

  Hello
  This same question has been posted in 2006 - not by me - with no successful response. I try again.
  If you create a user with the account of restrictions (member of the local USERS group) under XP, it cannot manage or power options Windows embedded and the Toshiba Power Saving tool.
  I managed, working on the file and registry permissions, to have power options Windows works. But I can not yet launch the Toshiba Power Saving tool, it always skip - rises the box 'you have no rights. "

  Is there really anything I can do to work around this problem?

  Thank you

  Yes:

  Log in as administrator
  Run the Toshiba Power Saver
  Go to "configuration Options".
  Check "Allow Limited user to change settings"

• TOSHIBA Power Saver won't work on the account with limited privileges

  Good day to all.
  I have old Satellite 1410 and for security, I am working on an account with limited privileges. I can't start Toshiba Power Saver, I get "access denied" message.
  I need to remove energy saver and I use Control Panel Power Option, but I can not here the default brightness.
  Can someone help me?

  Janusz

  Without system administrator privileges, many system options are locked and could not be used.
  You need admin rights to access this tool.

• TOSHIBA Power Saver software is turn off the optical disc drive, and I'm unable to re - turn on the power.

  Original title:

  Aloha!

  I have a Toshiba Qosmio x 775-3dv78 running Windows 7 Home Premium x 64.
  Similar to another old post here, I have an intermittent problem where the Toshiba Power Saver software is off the ODD (a Matshita UJ240EF - BD - RE) and I am unable to turn on the power.  To put the ODD back on, it's a matter of restarting (sometimes several times) until the STRANGE somehow turns on.
  Sometimes, when I do a hot or cold boot, a window opens asking me if I want Toshiba Power Saving technology to turn ON the ODD.
  I click 'Yes', but the drive remains switched off.
  I also try to use function - same key controls... The STRANGE remains turned off.
  Here are the "best":
  As described in the former post office, inside the Windows power settings, there is a slot layout titled "TOSHIBA Power Saver Settings v8.9.9.64".
  In this context, normally there is ONLY a framework for 'cooling method.  BUT only when the ODD is disabled, a second parameter appears to "Optical Drive Power".
  Change that on ONE for battery and plugged in fact NONE no difference... The STRANGE remains OFF!
  Toshiba support is of no help.  Their answer to this problem is to run a 'Mr Fixit' which I discovered just unrecognized devices and then removes the upper and lower filters for the reader.  This "difficulty" might work from time to time... when it does, the ODD is somehow transformed into a 'removable' instead of one device ATA device.
  But then in a few days, the STRANGE turns off again.
  Something different maybe notable, I found after that I continued services and the related process, programs is that the version number on the Toshiba modules show "8.9.6" - not the "8.9.9.64" in the window Power Options.
  And before you ask (LOL!) what's happening on a soft reinstallation of the operating system by the media of recovery Toshiba with all Windows 7 updates applied.
  While I'm waiting for a possible response, I'll do the following:
  Uninstall and reinstall all THE software Toshiba provided duty with the STRANGE (energy saving, combustion, players, etc.)
  I will also shoot material part and make sure that the STRANGE is well inserted in the connector (IDE?) and that the connector is firmly attached to the motherboard.
  IF who does things, I'll update this message and inform you all.
  Otherwise, any ideas would be GREATLY appreciated!
  Mahalo!

  Hello

  Method 1:

  Run the electrical troubleshooting utility and check.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

  I suggest you to change the power settings and check.

  a. click the Start button, type Power Options in the search field and then click on Power Options in the list of results.

  b. click on Change Plan settings for power management already select.

  c. other click on change advanced power settings

  d. expand TOSHIBA Power Saver Settings Vxxxxx and change the optical drive power managementsettings.

• 10 TECRA, toshiba power saver does not work on vista

  I can change the options of the program of toshiba power saver 3.2.0 as cooling method (performance, max, optimized, cooling performance optimized battery) in the parameters Panel / battery /... or directly in the BIOS but
  -values in the bios and in the control panel settings are not interconnected
  -regardless of the value (in the bios and in windows settings), there is no noticeable change in the method of cooling with the fan speed
  -There is a warning message in the battery Control Panel, who said: the changes are not allowed with toshiba power saver program.

  You are logged as administrator? Maybe your user account is limited.

  Also update the BIOS with the latest version. You can download it from the Web from Toshiba website.

• Portege R500: How could I access "Toshiba Power Saver" as a user restricted

  Hello

  I have a few related problems and would like to have someone to share knowledge on issues with limited on a portege r500 user rights!

  My question is: how could I access "toshiba power saver" as a user restricted?

  My source of knowledge not administrator is a very sophisticated page of http://blogs.msdn.com/aaron_margosis
  who said that my way to get an administrator back - Box (see: "MakeMeAdmin" - in German windows xp, you must edit the MakeMeAdmin.cmd file and replace the "Administrators" by "Administrators").

  But my problem with "toshiba power saver" is still not resolved.
  So I'd be happy to get information on your und solutions give you my knowledge as well, of course!

  [email protected]
  Kind regards
  Fritz

  You can use the feature Toshiba Power Saver Properties-> configuration Options (bottom left button)-> allow a limited user to change settings

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• Satellite C850-1E7 - need Toshiba Power Saver for Windows 8 64 x

  Where can I download Toshiba Power Saver for Windows 8 x 64?

  Hello

  C850-1E7 satellite was already pre-installed with Win 8.
  All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver

  However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.

• Utility TOSHIBA Power Saver for Satellite L40 - 17R

  Hi all...

  Firstly, thank you for the answer to my previous question, which got much help. I have another question. I had a laptop Tecra A4 before that ships with Toshiba Power Saver utility that can control the brightness and the different profiles of power for Windows. I now L40 - 17R computer laptop, which I cannot find the same utility for?

  Can someone tell me if there is a tool for the management of power supply for model L40 - 17R profiles, and where can I download it?

  Hello

  As you know for Toshiba WXP gave Toshiba Power Saver utility, but for Vista, this tool does not exist in the same format. Many functions now is in the Vista power settings. Utility TOSHIBA Power Saver is also there but just with several options.

  You can find it if you open the power options > change plan settings > change advanced power settings. You will find Toshiba Power Saver Settings V8.02.00.

  Good bye

• TOSHIBA Power Saver for Qosmio F50?

  I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

  What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

  The series F50 there as well? If Yes, where can I find it?

  Hello!

  As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

  TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

  I've created an interesting article here in the forum for you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=142522

  Good bye

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• TOSHIBA Power Saver replaceable by SpeedSwitchXP?

  Hi people,

  as I've seen here in the forums a lot of users of Toshiba laptops has the problem of a noisy and often fan running. The Toshiba Power Saver 1.27.2.1 installed on my satellite M30X-167 seems to not have the feature of switching on the CPU to load dynamic processor.

  There SpeedswitchXP - CPU frequency for mobile control Windows XP on http://www.diefer.de/speedswitchxp/index.html

  Does anyone of you have a positive experience with the help of other register controls as the original from Toshiba?
  Doing dynamic CPU speed control significantly reduced the activities of fan?

  Best regards and greetings from the Germany
  Joerg

  Hi Joerg

  I had already installed on my Tecra M1. It worked fine, but I n t notice a big difference. Can you please tell me what laptop do you have?

  In my opinion, you can try to install it. On my unit SpeedSwitch works properly without any problem, but AFAIK the tools as it works well on laptop computer desktop map mother don t allow this tool may have information on the temperature or things like that.

  As I said you can try it.

• TOSHIBA Power Saver - SP6000 question

  Hello

  I recently had to reinstall the Toshiba Power Saver on my SP6000 utility. Since then, I can't find any possibility to change the method of 'cooling' ('optimized battery', 'performance' etc.).

  Can I have EVER had, so I could be talking nonsense here :-) It's just that I seem to remember having this option before. I'm trying to force my laptop shorten the CPU rather than keeping the cooling fan marketing every few minutes, and I thought that was possible using the method of "cooling".

  Any help would be appreciated.

  See you soon!

  Hi, Jerry

  First of all, I hope that you have installed the appropriate for your model energy saver. ;)

  Launch the energy saver and Power Save Modes tab there is an option called FULL POWER subsector first. It must be marked, and then click details. At full power, properties select tab power saving Mode and there is option method of cooling. On this site, you can choose between three options:

  -Maximum performance
  -Performance and
  -Battery optimized

  I hope this little description to help you.

  Good bye

• How to make Toshiba Power Saver working in Vista?

  Hello...
  Is there a way to make toshiba power saver works on vista?

  If not, is there any other 3rd party program that does the same thing? Or y at - it news that toshiba is developing this program for vista?

  thanx

  Hello

  you will laugh, but do you know who developed the powersaver for vista?
  It's toshiba (Yes :)), and all functions are adapted from current saver original toshiba XP. If you don't need to download anything, because all functions are already supported. :)

  So, just the question why do you ask? ;)

  Welcome them