The printer to malfunction.

Similar Questions

• malfunction of the printer

  Salvation of the of-My Photosmart C6180 All in one has worked wonderfully for me for several years the wireless, but now after getting a new IMac computer, I get a continuous string of the same message "to avoid damage on the button to turn off the printer. Do not use a wall or the band to close switch"I can't turn it off at the power point, but I can't be sure. Its also very hard to close it using only one pass now.   Question: Can the ' damage 'fixed. ' If Yes please tell me how. I would appreciate.

  Hi Battleron,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Photosmart C6180 printer and saw issues of power. Plug the power supply directly into a wall works and in the computer. Do not connect it a power strip, surge arrester, or secondary power source because they may cause this problem. This should solve your problem. No damage occurred, that it is a failure of communication and just need to restart or reset.

  Hope that answers your concerns.

  Thank you.

• Install the HP Photosmart all-in-One printer-D110a malfunction

  I can not the printer HP D110A properly uninstall or reinstall on my computer.  I have a desktop HP Pavilion with Windows 7 64 bit with an Intel Core processor.

  I went through many suggestions on the HP support site, more than once, and the installation failed every time with the message "the system cannot find the file specified."  This message is displayed if I install more software HP Photosmart and pilot or just the HP Photosmart basic drivers.  I went to Control Panel programs and features and uninstalled all HP without change.  I also deleted temporary files and folders without change.

  Once that occurs, I hit very well and it sends a report to HP and shows me an error situation code: 32438568.  The program starts then uninstall points, but - error after a few minutes with the message "HP Installer uninstaller has stopped working".  In the background grey, I can see its order to step 9/11, to the location of the progress of the installation of Software\Microsoft\Active.

  I also tried the HP printer program and searched the forum without success help files.  Please help, I want to just install my printer.

  Problem solved!  Here's what I did to get the printer D110a Photosmart software and drivers installed.

  1 - Download the full version of the software on the HP site.  Do not choose the version of the base drivers.  We will remove unnecessary items in another step.

  2 turn off your antivirus, antispyware, and firewall.  Make sure that you disable all of them.

  3 disable startup: click on the Windows icon in the system tray, type msconfig in the search field and click Enter.  Choose "Selective startup" and uncheck "Load Startup items".  Click 'Apply' and then 'OK '.

  4 restart your computer.

  5 - Disconnect the USB cable from the computer.

  6 - click on the file of the software that you downloaded.  During installation, you will arrive at a screen of welcome from HP with several buttons.  Click on "install".  In the next screen, there are 3 or 4 links.  Click on one, titled, 'Software' or 'select software.  Uncheck the print smart Web, HP Photo Creations and Customer Participation program.  (You will be able to install it later if you wish.  Now we want to simply get the print, scan, and copy functions work).

  7 - proceed with the installation.  Connect the USB cable when prompted.  If you can, test by making an impression and then a scan.

  8. remember to go back to msconfig and check 'Normal Startup'.  Then click 'Apply' and 'OK '.

  9. turn your firewall, antivirus and antispyware programs turn it back on.

  It was the only thing that worked for me.  I found a large number of these instructions in separate solutions of HP and help articles, but I had to put it all together to get the software and drivers to install correctly.  I hope this helps someone.

• Brother printer wifi "the printer is unresponsive.

  Hello

  I'm new to Mac but am generally competent computer/network.

  My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

  Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

  I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
  I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

  HELP............!!!!!

  Greetings thequizman,

  Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.
  
  

  If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

  1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
  2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
  3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
  4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
  5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
     To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
  6. Follow the steps described in previous section once more.

  If your printing problem is not resolved, contact the manufacturer of the printer to support.

  Troubleshoot printer on your Mac - Apple Support

  Take care.

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• Hello help, Mac can't find the printer

  Hi all

  'BonjourPSsetup.exe not supported under OS X' I am puzzled.

  To create a roaming network, I added as an express to my Time Capsule airport and doing so changed the name of the network. (Original name was a little too identifiable) now MacBook WiFi can not find the printer, it allows.  (cause he's probably looking for the former name of network). Went to Apple's support for assistance. Found several posts with instructions. All direct me to download the Printer Wizard Hello.  When I do, I get the above error.

  Also, went to:

  Applications - printers and Scanners - add

  List of shows:

  Name: Series HP Photosmart C4385

  Type: USB

  Cannot change the type of USB to Hello

  SYSTEM-

  El Capitan 10.11.6

  MacBookPro, MacMini, iPad.

  Express connected to the Airport via CAT 6.

  MacMini use USB for printer

  HP Photosmart C4385

  Thanks in advance,

  Mike

  Resolved to my situation. Find the HP original installation disk. Uninstalled and reloaded. Fact

• Stuck "waiting for the printer to be available."

  After initially looking at it's going to print, the printer dialog box displays "waiting for printer to be available" and it's there (even if the printer - inkjet HP series C3800 - is ready).

  Here is what I tried:

  Using the HP utility software on the same computer, I am able to successfully print a test page, which rules out a problem with the printer and its connection to the computer.

  Printing worked normally before moving on to the Sierra. I tried resetting the printing system and add new printer (Sierra recognizes very well). I also tried to run in case disk utility have a permissions problem.

  I'm stumped at this point. Help much appreciated.

  Same story, but with a HP Laserjet P3005dn, specific scenario, the exact symptoms, exact attempts to improve...

• Scan from the printer HP for MacBook

  After the Update September 1, 2016 at the HP6500A, the scan from the printer to the computer software has become inoperative.  Printer cannot detect the MacBook Pro.  Can you help me?

  You might have better luck using the image transfer application on the pre installed in your folder scanner Applications.

  Help here > the basics of the Mac: using a scanner - Apple Support

• Default size of paper in the print preview

  Mode legal print preview, I changed the format of paper and now it is the default value. How can I get the default back to letter format and keep so I don't have to change each time I print? Here also the predefined default settings for ink black & white - what should I do?

  You should be able to reset it in the print window, and then select Save current settings as preset.

• My Macbook Pro shows off my HP printer online after the first use (print or digital). I have to turn the printer off and then on again to print or scan for even once.

  My Macbook Pro running El Capitan 10.11.6 shows my printer HP (envy 110) as offline after a print or scan session. I have to restart the printer each time I use it, and then the Mac it falls again after printing or scanning session.

  I loaded the latest drivers on the Apple site without success. The two are on a wireless home network.

  Help!

  OS X El Capitan: print troubleshooting

• small problem with the printer dialog box

  I recently added a Brother printer to my IMac and ran into a minor problem.  When I put in place using my WiFi and AirPrint, the dialog box has a convenient box for the black and white that I was able to check in one easy-to-replace step and just print in color.  However, the alarm time and the answer is a bit slow.  So, I then plugged a cable and add this version of the printer.  Now the box is missing and nothing I've been able to do, to delete and add new printer allowed me to bring that?  Any ideas on how I can get this feature practice appears in the dialog box with the printer connected to the cable?  Thank you.

  If I understand correctly, you have now two entries separated for this printer to Print & Scan? It's OK, although AirPrint is better for various reasons.

  I understand the printer takes an unacceptable amount of time to wake up to when choosing the AirPrint printer, and you want to avoid this.

  If you have added a separate entrance - one for the USB printer connected - how who you? Did you leave the print & Scan install this printer automatically on its own, or did you download and install a driver of brother separately?

• How can I fix iphone and ipad to recognize my printer air.  I t o disconnect the printer and wait for 30 seconds before reconnected and then they both recognize the printer

  How can I fix 6s iphone and ipad air when they do not recognize my printer air.  After unplugging the printer for 30 seconds, they can connect to the printer

  Hey robertafromnull,

  Thank you for using communities Support from Apple. We can see from your post that you are having problems with printing of your devices on a printer of Air and that it would be happy to provide advice to solve this problem.

  Let's start by going to the section called "If you can not print on your AirPrint printer" in this link here: Topic AirPrint. This should contribute to help you get started with you back to printing from your iPhone / iPad. Let us know if this can help, or if you encounter any problems.

  Kind regards.

• When you select the print document, a box comes up to save the document as. How can I prevent this from happening every time?

  I want just the print page, will not record to it anywhere.

  I hope it's just a setting. I can't find to fix on my own. Thank you for your help.

  Sandy

  Depending on your printer, there may be a checkbox in the print dialog box to "print to file". Make sure the box is unchecked.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• The print page opens not when I try to print a Web page.

  I use Firefox for many months and so far I have had no problem printing a Web page. I was away for a week and discovered this problem yesterday when I tried to print a Web page. Maybe there was some changes during the week that I'm not aware of?

  This happens on all websites or is it on particular websites?

  Normally, a button to launch a page in the print format appears in a new window. Blocker integrated in Firefox allows popups generated by a user by clicking, but if you have additional security modules, maybe one of them is blocking those.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?