The program displays error 1 airport

Similar Questions

• When fsx starts, the program displays the home page and stops. What should do?

  I've been using Flight Simulator X (or more acceleration) for several years with no problems.  Then one day, when I clicked on the icon FSX, the cover page came and has therefore a hour glass cursor and then nothing else.  What can be done to solve this problem with the re-installation of the program?

  Thanks for the reply.  I had two other answers.  It has been suggested that I have remove the FSX.cfg file and let FSX rebuild.  It does not work.  Then another suggested I have remove the current log file.  I did and FSX is started without problem.  I have restored the old FSX.cfg file and everything is back to normal.  Now, I'm working on finding a way to restore the log

  Thanks again for your response.

• The program Setup error: impossible to install a file that is necessary because the CAB file installation has a signature digital invalid

  Original title: Cabinet file configuration 11. cabin has an invalid digital signature.

  When you try to install a software program on my Windows 7 Netbook, a setup information panel said "a file that is required cannot be installed because the 11 cabin.» Configuration CAB file has an invalid digital signature. This may indicate that the file is corrupted. The program would not load. Is the problem with the software or the Windows 7 Netbook? If the Netbook is the problem, the defective CAB file can be deleted and replaced with a correct file? If so, how? Help, please. Thank you.

   
  Hello
   
  1 are. what program you trying to install it on Windows 7?
  2. is this program of Microsoft or non-Microsoft?
  3. are you able to install other programs?
   
  It is difficult to tell if the problem is with the software or Windows 7. We recommend that you provide us with more details, so that we can research and help you at best.
  See You can not install some programs or updates

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The programs compatibility error message saying that compatible with XP Service pack 2.

  I have Windows 7.  My itunes won't start I think because of the mistake of the program saying that compatible with XP Service pack 2 compatibility.

  I installed the latest version of itunes 64-bit for Windows 7 10 times already and rebooted several times, it still not open.
  Help, please.  I'm stuck. :(

  Hello

  You can read the following article and check.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  You can also contact Apple for assistance on this issue.

  Get help choosing your product below

  http://www.Apple.com/support/

  See also:

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• Can not turn on the same monitor if connected to the TV displays error no video signal".

  Original title: barely tv cell

  have on my computer and the screen does not light. He lit up a bit but not on. I have connected my laptop to my tv via the vga cable. Start the computer screen turns off after startup. Start in safe mode, it works. Restart n normal mode turns off screen. TV said no video signal. What causes this?

  Hello

  Try the steps mentioned below and check if they help to resolve the issue.

  Method 1:

  Use the option ' enable video low resolution (640 × 480) ' start and then update your video card driver

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  (d) log in your computer with a user account with administrator rights.

  (e) If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

  If these steps resolve the issue, you are finished. If this is not the case, go to the next set of steps.

  Method 2:

  Start the computer in safe mode and disable your video card

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.

  (d) log in your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  (e) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the list of categories of equipment, expand the category of display cards. Take note of your graphics card.

  (g) with the right button of your graphics card and then click on disable. Confirmation prompt, click Yes.

  (h) close all open windows and restart your computer normally.

  (i) when your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

• The program display open in the taskbar

  I use Vista to the Windows Welcome page.  At first the buttons in window open program were justified left, similar to other versions of Windows. Then one day, they were smaller and good reason, isn't a problem, except that even if the task bar is almost empty, only 2 will show at a time.  If I have more than 2 programs open at the same time I must then scroll down to find and switch to the third program.  I do not remember anything, but if there is a way to show more than 2 programs at the same time, I like to restore.
  Thank you

  Hi Itsjane429,

  Make changes in the quick launch on the taskbar which may help you. Try not the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-icons-in-the-taskbar

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Impossible to uninstall the program; Permission errors

  I'm trying to 'Uninstall', an unwanted program, but I get a message that I don't have permission to do so, check with the administrator system or something to that effect. I am the owner of the computer, and whenever I ask which is the system administrator, it says I am, but I get no permission flag. How to take control of my own computer and do what I want?

  Thank you, Bob

  Hello

  Try this free Revo Uninstaller program to remove it.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  "How-to" instructions for use are included here: read the information on the tabs at the top.

  ______________________________

  Try this "Fix - It" Microsoft to uninstall programs the problem;

  http://support.Microsoft.com/mats/program_install_and_uninstall/en

  What it fixes...
  • Registry keys damaged on 64-bit operating systems
  • Corrupt registry keys that control the update data
  • Problems that prevent the installation of new programs
  • Problems that prevent existing programs are completely uninstalled or updated
  • Problems that are blocking you from uninstalling a program through the item add or remove programs (or programs and features) in Control Panel

  _____________________________

  And also scan for Malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• When you try to connect to: site Web de BC to administer, the browser displays error...

  This shows up. Also in firefox and chrome. Other sites work fine!
  Cannot delete, cannot be changed, can not even connect. I can not wait 30 days...

  

  Hello

  The url in the error message does not exist in BusinessCatalyst. Did you add the field to any site of BC? Could you please try to connect by using the url of the system. If you continue to get this error message, please join the support team, and they will help you with this

  Getting started

  Let me know if you have any question.

• Try using the Vista upgrade disc supplied with the system displays error Windows version is not authentic

  original title: with Acer Aspire Vista Help
  Well, here's the story, I bought an Acer aspire T180 a few years back from Best Buy with Windows Vista installed. The only drive I received was a Vista Upgrade disc. Fast forward a few months computer slows down, etc so I thought I'd see any control and maybe cleaning the system some. Put my disk to upgrade looking for the way to do it. Make the mistake of installing the upgrade. now I have the upgrade on my computer and it always tells me that I have a version of windows that is not authentic. I tried to use my COA on upgrade drive, does not recognize and COST on the case of my Aspire, once again with the same result. I have my old version under windows.old, but can't seem to install it. I would just go back to my Vista OEM install. I have access to another computer, but it is an Apple and prefer if I didn't use this option unless it makes it easier. I guess what I'm asking, it's just to get back to my legal version on this computer, would like to keep files, but if can't, I would like to do a clean reinstall. Mine is out of warranty, so no help from Best Buy or Acer without paying their

  You are welcome.

  But try first to borrow a Microsoft Vista DVD of an acquantance of work for this restoration instead of a full recovery.

  See you soon.

• Cannot save .png because the program error

  PS - CS6 - Windows 7 Home Premium.

  This has happened for a while.

  Windows 7 Home Premium, i7, 16 GB RAM, Radeon HD 5700 video.

  I repaired the installation, but it will not save PNG.

  

  Then when I close the program this error appears:

  

  Help!

  Bonnie

  https://www.Pinterest.com/PIN/create/extension/

  Could you please activate once hidden Admin account and then see if it of a matter of permission or not.

  How to enable the hidden administrator account: Activate the account administrator (hidden) on Windows 7, 8, or 10

• The program developed in Visual Studio 2005 is not working in Windows 7?

  Hello

  I had developed a program in Visual Studio 2005 (VB) and it worked fine under XP. The same program displays error when installed on Windows 7. I changed the Advanced Options of compilation to x 86.
  Can someone shed light on this?
  I get the following error
  System.Data.OleDb.OleDbException: Could not find file 'C:\Windows\system32\evqed.mdb '.
  In my program the database file "evqed.mdb" is placed in the folder of the application with the following code
  ctrdirPath = System.IO.Directory.GetCurrentDirectory

  ctrdirPath = ctrdirPath & "\evqed.mdb".
  This works very well in my development PC and is installed and works just as well. In the other PC, I get this error.
  (The program uses speech 5.0.0.0 DLL and Microsoft Access 2003)
  Thanks in advance
  V L Poirier

  Send a group Tecknet or MSDN who were hanging out of developers

• How do I close the program via RS232

  Hello

  How can I stop the program after I press OK in guest user info? I use line (RS232) series and this part as an attachment is Subvi, the main program is in while loop. But I don't know how I can stop the program after error = true? Is any block for this?

  It will work better if you do it like this.

  

  Sorry for the late reply, you cought me at the end of my work day.

• Confused by the new lining Preview in the program monitor

  I am totally baffled by the new trim body CC 2015 preview mode and I would be happy to help. Let's say I have two video clips, staggered one above the other. If I select the change point of the clamp on the top rail and drag it to the right, extending the duration of the clip, the monitor of the program displays a preview of the clip I extend AND an overview of the the out clip is over. The strange thing for me is that the preview of the edit point I chose not to update in the monitor program and instead the preview of the clip on the bottom track updates, showing me that it is new to the point. In general, I want to see an updated image of the clip that I extend NOT just the clip it is potentially covering on a lower rail.

  Is this a bug? Or a 'new '? Can I disable?

  Thank you!

  I was too puzzled by this new default behavior. To have the screen divided into two while dragging an in or out point gave me a headache that I tried to focus on the right pane.

  You can disable it entirely by clicking on the drop-down list of the timeline (the wrench) settings and uncheck "Composite overview over the plate.

  After spending 30 minutes so scratch my head and looking for a way to disable this behavior, it would be wiser for this option under the 'Trim' preferences panel... or even the list drop down monitor settings...

• MY TEST of ITEMS he's EXPIRED AND I BOUGHT a NEW one. WILL NOT BE TRANSFERRED TO THE PROGRAM

  MY TEST OF ITEMS EXPIRED II - I BOUGHT NINE ONE IS IN MY ACCOUNT BUT THE SERIAL NO DOES NOT WORK IN THE PROGRAM

  Error "serial number is not valid for this product". Creative Suite

• Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

  Original title: internal program Errror

  I use XP Professional 32-bit.

  Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

  Program internal error:.\Src\IntegrationToolsHolder.cpp,21

  If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.

  Any ideas, please, as to what is the cause?

  Kind regards

  I told you I want to talk to you soon as you try these things.

  How to boot in Safe Mode and Clean worked for you?  Not at all useful?

  You said about this 2 weeks ago?

  Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

  Update of security 908513 is included in Service Pack 3 update.

  Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

  What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

  You can Google something like:

  Explorer XP crashing

  (you must complete your suspect on behalf of add on)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.