The program monitor

Similar Questions

• The program monitor shows only half of the picture

  Hi I'm new in preview, for some reason any when I open a photo in the program monitor, it shows that half of the picture, straight cut, in the Center (see below). I used to be able to see the entire photo and add the title and text to it.

  what setting should I bring back to normal?

  

  The first thing I would look at is the Sequence of parameters - click, on the top menu and ensure that the settings are - post a screenshot please. Your program monitor looks like a size extra-large, much wider than the standard ratio 16:9 HD or 4 K.

  The setting sequence is the basis for everything in your project - if it's wrong to start, all you will be affected later.

  Once you have a correct adjustment sequence you are satisfied, still images or video clips you want to use may not be the same dimensions/dimensions you chose for your sequence (such as 1080 p which is 1920 x 1080 pixels). You may have a still picture with larger dimensions, and then it will appear cropped as you currently see as its size does not match sequencing. Think of it as the photo was too big for a picture frame.

  As Jim mentioned, you can use the effect Adobe path across the source to fit, however it can be quicker and easier to simply with the right button of the image on the timeline, and then select define framework - this will automatically go to the media in your sequence.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• The program monitor randomly goes black

  First Pro CC uses for months and no problem.  All of a sudden, the program monitor goes black, then back over video transitions between clips, then goes black again.

  I have a HP workstation, with a processor of xenon 12-core, 32 GB RAM, 9 TB of disk storage hard (the first 1 TB flash), blazing fast dedicated with a ton of video memory video card.  It's worked wonders for 12 months and with all the other products Adobe (Photoshop, Lightroom) and hundreds of other programs.  I have NOT changed any video card or video processing settings.   I don't have a hardware problem - it is a problem with Adobe first Pro CC.

  I spent the maximum money on the hardware and the software more later/better (even though I hate paying a subscription for software).  And now this...   Moreover, I understand now and still not a bug, but when the screen goes black in a video software - well, it's like losing your direction while on the highway - it's sort of IMPORTANT - wouldn't you say Adobe?

  I'll scream at Adobe on Monday, but have a serious work that must be done this weekend.

  Is there any help that works?

  You use the latest versions (which numbers?) of Adobe CC?

  Try resetting the workspace.

  Try to update or restore your video driver.

  Try to remove the media cache files.

  Try resetting preferences.

• Where is the drop-down menu which will distribute choose me multi cam to open different cams in the program monitor?

  I have a project of two cameras that I want to use the multi cam editing option.  Cannot find how to get individual cams open in the program monitor I can start cutting between them.

  The key offers that option as well.

• Format change in the program monitor

  Hello

  
  

  I don't know what happened - but somewhere over my editing that the program monitor has changed to a standing position (as I filmed with an iPhone stand). I can't find where I can change the settings back to 'normal' - if anyone can help a beginner in Premiere Pro?

  My only solution now is to start a new project and make the film...

  Louise

  

  It is the sequence settings that alter the size and shape of the program monitor. Take a look at the title sequence / sequence, the size of the pixel settings should be the same images of you, if you are on CC, you should be able to change the settings if necessary.

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• The program monitor recovering at the center when changing sequences

  I picked my level of zoom to 200% for a nested sequence and discovers the top left in the program monitor to work with the media.

  When I go to the nested sequence in the tab adjacent timeline, I also chose my 200% zoom level and the position of the monitor program sliding towards the top left.

  When I tab back to my first sequence, my monitor of the program, always set at 200%, restores the centre, and I have to drag my monitor of the program towards the top left.

  When I return to the nested sequence tab, drag the program to the top left monitor.

  Is there a way to keep my monitor to reset the program back to its central position?

  I think you're stuck to readjust on this one.

• First CC 2015 - the program monitor turns black under a lot of effects

  So I worked on a video rather strongly. But it looks like a first or my GPU can not handle the amount of effects and layers because the program monitor keeps going black. Only solution is to restart the program, but if I change something or you move the timeline bar thing it just goes black again. Now she even at start up sometimes and it's really hard and boring editting. After he did this export is also impossible, it will give an error.

  I use Windows 7 and my GPU as a GTX750.

  I found a similar question on the forums but couldn't find anything useful. Is this a bug in the program?

  Run the types of effects that you use on this system as described, I'm not at all surprised that you get the results that you are. When the program "suffocates" past a certain point, it becomes totally wonky like that. How each of us "think that" this should work and how it does in reality are not necessarily related. I suggest to go to the Page of the Tweaker, where they made of actual testing of the systems in operation for years with Adobe video software, and look through their equipment.

  http://ppbm7.com/index.php/tweakers-page

  Neil

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• When I stopped my project, in the program monitor window appears red and yellow bars... why

  When I stopped my project, in the program monitor window appears red and yellow bars... why?

  It is a problem with the captain to loosen then off material MPE.

  The next time you post a question: FAQ What information should I give...

• I can't get the subtitles to appear on the program monitor

  Hello

  I watched a lot of videos and used several Adobe Tutorials but I can't see my subtitles on the monitor of the program (the monitor in the upper right corner.  This is called the correct program monitor?).  I created the CC from scratch and that they are correctly placed on the timeline.

  Help, please!

  Thank you!

  the default caption closed in the project bin is a type and another type is the default caption closed in the program monitor.

  for subtitling the show, is the type of closed captioning.

  Sorry I can't be specific, if I leave things in the memory will be too confused - I'm just failing to launch the first at this time to specify exactly, but match your closed captioning (change the type of monitor to show)

• Why my subtitles appear in the program monitor?

  Howdy!

  I'm doing some captions, body CC 2015, horrible on a video with an audio track.  I created the subtitle file, turn on the display of the legend on the program monitor and made sure legends I created (just a little far) are activated without a doubt too.  When I saw the legends in the monitor, I exported just the section captioned a. MOV file, with embedded captions once and once with them "engraved" on the video.  The subtitles are displayed, even if they are a bit of a mess (spaces, etc.), so I know that the first known legends.  So... why they do not appear in the program monitor?

  Any help appreciated!

  (- Jim 8 ^)

  Looks like that the first default - folder > new > legends > video settings > new legends

  default values for the Standard CEA-608

  and the program, the default monitor - key > legends display > settings > CEA-708 Standard

  Thus, with the legend, the program monitor's two default settings does not appear

  for me to have the subtitles to display in the program monitor, I had to 'match' standards of legend

  but, what happened to change the font size? Are you able to do? I thought I read in the legend help first, this type of policy, the size, was editable, so am I missing something?

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• When I drag photos to the timeline, they are non-standard in the program monitor.

  When I drag photos to the timeline, they are non-standard in the program monitor. So I spend a lot of time to readjust them to the frame. Can you guide me on a faster method? Thanks in advance. Here are pictures of the IMG

  Sabu Singh

  Thank you for your advice. The problem is resolved.

  Concerning

• Clip displays only when moving in the program monitor

  From CS6, I'm putting in tune with first CC 2014.  I noticed that when the zoom level select anything less than 100%, the element in the program monitor goes black when he doesn't play.  In other words, if the level is set to the Fit or 75%, I can't see him once he stops playing.  Has anyone seen this behavior and most importantly, can you tell me how to correct?

  Thank you!!

  I'm happy to announce that I suspect to be a problem of setting is proven true.  Activation of the grid 'transparency' by clicking on the two key in the source monitor and program fixed the problem.