The r240hy of 23.8 "monitor has a headphone jack?

Similar Questions

• The manual says I can connect speakers or headphones to my headphones Jack (SVF15A1).

  My VAIO SVF15A1 has a headphone jack (I guess that's a tip-ring-ring-sleve SOCKET configuration).  The manual says I can connect speakers or headphones to this Jack, but the speakers and headphones usually have the usual configuration of TRS stereo (less unique ring on the plug).

  I'll damage my laptop by plugging the standard TRS headphone into a HEADPHONE jack?  Remember, headphones and speakers do not have a microphone.

  One web site says that a TRS jack will be short the microphone and the ground, but does not hurt.

  Here is a picture of what I'm trying to describe.  The iPhone headphone cable is similar to the Sony headphone jack configuration

  

• Satellite A300-1IL - monitor has white lines at the bottom

  Good evening

  about an hour, followed by my satellite a300 monitor has white lines at the bottom.
  I try to stop, change the resolution but i just turn on my laptop, the screen has this white line.

  It is a problem of monito'rs or videocar problem?

  Sorry for my ebglish

  Hello

  > It is a problem of monito'rs or videocar problem?
  It's easy to say; you need to connect the external monitor to the laptop and need to check if the same if possible lines on a second external display.

  If the lines were visible on the external monitor, so that the GPU fault is possible.
  Otherwise, it may be defective internal display.

  Welcome them

• My monitor has started to Flash a few days ago... now it's for most of the colored lines.

  My monitor has started to Flash a few days ago... now that's for most of the colored lines... I updated the NVIDIA drivers for the NVIDIA Geforce 8400GS from NVIDIA site and it improved for a while, but now he's back. I got tired of another working monitor and the same thing happened so I think that this has to do with the video card.  Help, please.

  HP Pavilion a6130n

  Windows 7 Professional

  3 GB RAM

  400 GB HD

  NVIDIA Gefroce 8400GS

  It worked!  Thanks a lot to vnyga and old_geekster.

• Do Acer b286hk 4K monitor has the ability to upconvert standard content HD?

  I wonder if this monitor can upconvert content as TV can do. So my films, if played on my PC would be better on this 4K monitor on a regular HDTV.
  Thank you for all the answers.

  Alaska99801,

  This monitor has technology for Super sharpness setting in the OSD which can adjust the quality of any content to enhance the edges of the lower resolution. Technology Super sharpness able to fix the details and optimize the quality of the image, please see the photo to see what I mean.

• SELF-PROTECTION MONITOR HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE. WE ARE SORRY FOR THE INCONVENIENCE

  Original title: Tamper monitor

  I KEEP AN ERROR MESSAGE "TAMPER MONITOR HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE.  WE ARE SORRY FOR THE INCONVENIENCE ".  HE COME EVERY 3 TO 4 MINUTES, IF YOU CLICK SEND ERROR REPORT OR DON'T SEND IT DISAPPEARS, BUT RETURNS.  IF YOU DO NOT CLICK ON FOR A FEW MINUTES, IT FREEZES AND WILL NOT GO OFF THE SCREEN NO MATTER WHAT YOU DO.  HOW CAN I SOLVE THIS PROBLEM...

  Hello

  1. have you installed Norton Security software on your computer?

  Sabotage monitor (tapmon.exe) is associated with a component of Norton called Norton safety Minder. I would ask you to uninstall and reinstall the Norton Security software and check. You can also contact Norton support on this issue.

  Check out the articles below to uninstall and reinstall the programs in Windows XP.
  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  Installation of programs
  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/installprog.mspx

  Support Norton:
  http://www.Symantec.com/support/index.jsp

  Note:
  It is recommended to install the software of security immediately after the issue is resolved.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. Unplug all printers on this port, and then delete this port.

  Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?

  I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc

  Hello Apollo,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.

  Perform the steps in the link to uninstall Redmon.

  http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39

  Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• My monitor has shadows after every letter I type and my icons of the screen.

  My monitor has shadows after every letter I type and my icons of the screen - how can I make them disappear?

  Hello

  1. All changes made to the computer before the show?
  2. What brand / model of the computer?
  Method 1:
  This problem may occur the display drivers have not been updated. Check out the link and follow the steps to update the drivers.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can also visit the link and follow the steps.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Method 2:
  Check out the link and follow the steps to check if a non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

• The image on my HP w2408h monitor has moved down about a half inch.

  The image on my HP w2408h monitor has moved down about half an inch, so that there is a black band a half inch to the top and one half inch of the image missing at the bottom.  I tried the Auto adjust button on the monitor and using the vertical position adjustment in the menu of the monitor.  Neither have worked.  I have Windows Vista.  I replaced the video card, a few months ago, but this issue has not shown until recently.  Is there another way to set the position of the image?

  Native and recommended for your screen display settings are 1920 x 1200 at 60 Hz. Is it possible parameters have changed the resolution? I have a monitor resolution of 1920 x 1080 and forced the graphics card at 1600 x 900... This resulted in a band of black at the bottom and the top of the screen. Check and make sure that all parameters are correct and correspond.

  Frank

• Need help - how to open the 2007wfp cover? Monitor has intermittent problem with vertical sync.

  To open the lid of my 2007wfp monitor I removed the 4 screws located on the site where the monitor gets attached to the bar, but the cover will come off the coast. There must be some tighten hidden somewhere, which I couldn't find.

  Does anyone know how to open the box?

  Is there a manual to repair available somewhere?

  Any help is greatly appreciated!

  Message edited by HEW399 on 03/28/2008 19:42
  
  

• Satellite Pro S300 - cannot extend the desktop to an external monitor

  Hello
  I have a Satellite Pro S300 and it won't extend the desktop to an external monitor / projector, but it will clone the desktop?

  so far I have tried:
  2 instructors and 1 projector all do the same thing, will clone but not extend.
  Reinstall the latest drivers to display on the Toshiba site.
  Reinstall the latest drivers of change on the Toshiba site.

  But nothing worked, I even checked my S300 colleagues to make sure that I use the same parameters and their (of 2 other s300) extend and clone office.

  Has anyone seen this before and how solve you the problem?

  Paul

  Did you first remove the old driver before you install the new driver? If this is not the case, try to reinstall the driver again. Therefore, to remove the old driver, restart the computer, use CCleaner to clean the registry and install the new version you can find on the Toshiba site.

  More I would try updating the BIOS. You can find it on the Toshiba site too.

  I hope it works for you.

• Qosmio G35-av600: how to use the display internal as a monitor using composite-in?

  I want to connect my video gaming system and use my laptop screen, but I can't seem to understand how to change the settings so that my monitor displays the video game? Composite in the settings?

  I have a G35-av600 bought last June. If anyone has any suggestions, let me know

  Hello

  I don't know if I can help because I know something about the Qosmio G10 and the G20 and your Qosmio seems to be a mobile US but I will try my best ;) m

  Qosmio G10 for example, you must modify the input parameters in the Toshiba utility image of development, but I guess you don t have this tool pre-installed.

  But I think that the composite is a good Butler built the connection with the game station.
  I think that in the advanced graphics settings, you should be able to find the right options.

  Play around with the settings.

• Monitoring has not been updated in ages.

  We bought several licenses for Surveillance and currently, using a system of 9 camera, soon an update at 12. The main application of monitoring has seen an update in a long time, and there are quite a few new models from several manufacturers that I'm not sure that it will support. It already supports a ton of Vivotek models, but we are about to buy those are not on the list. I guess they will work, but I want to make sure monitoring is still developed and maintained before buying more licenses.

  About the iOS app, looks horrible and heavy as hell.

  Oh and BTW, I can't seem to find the Windows application anywhere. Anyone with a link to download?

  http://support.NETGEAR.com/product/RNNVR01L-1000s

  Look under the Firmware/software, and click Windows Application.

  Thanks for the comments on the Surveillance. I sent a message to the people who work with Surveillance.

• K272HL monitor has bad driver on Web site

  Everyone knows something like that?  When I plugged my new monitor K272HL my PC recognized it immediately and my device manager showed is that the monitor of K272HL in his list of devices. I didn't install anything. However, a few days later I noticed that photos on Web sites suddenly aren't looking right. I went to the Device Manager and found that the monitor was now being listed as a generic PNP monitor. The K272HL is not found. I disconnected the monitor and reconnected again. Still no luck, it seems that the driver has simply disappeared.

  So I went to download the driver for the monitor K272HL , but the driver that is contained in the file is for a monitor of K192HQL , not the K272HL. I advanced and tried, but it is certainly not the right driver.

  I spent half an hour on the cat tries to convince the guy that the driver was hurt after uploading again several times. Finally, he gave me a number to call. After going through basically the same thing with the person I spoke to and finally convince the driver was wrong, he told me could not help me and to remind early the next day.

  After 30 minutes on the phone with another phone support person, I think that the person manages to convince that the driver was wrong and said that he contacted someone else should be fixed in the next 24 to 48 hours. Certainly he has only 24 hours, but the wrong driver is always there. I hope that someone in the audience could have just sent me the good driver zip file is very small, but apparently they are not able to do it with their system or they only got the same bad driver like me.

  It has been frustrating because all I want is the driver so that the images look OK, once again and my computer recognizes it as the monitor who really is. I can hardly believe, but I seem to be a person who has found a wrong link in a base of support.

  rfreedlund,

  I received comments that the monitor drivers have been corrected for several models. My first test found that the K272HL and the K192HQL both showed the appropriate drivers. I hope that you find the same and I look forward to any comments.

  Thank you again to continue this and help us fix this problem. I'm sorry he had to leave to get so far before it got attention, she needed.

  Thank you
  Cory

• Use the TV as a second monitor wireless

  I have Window vista premimum can set up a wireless connection between my computer and the television, I want to be able to use the TV as a second monitor or to be able to look at what's on TV on my computer and visa versa?

  Hello

  (1) your subject line has nothing to do with your question. If you have the glass effects, then Aero is running. See: http://windows.microsoft.com/en-US/windows-vista/What-is-Windows-Aero

  (2) you cannot configure a wireless connection to your TV as a monitor, it must be physically connected to an external monitor to your computer connection.

  (3) you can't watch TV on your computer unless you have the correct tuner added on or integrated to the system card.

  Please try to limit your problems to one topic per message with the subject that corresponds to the question. Different users with different types of expertise can then address all your problems. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org